Klaus Schmidinger wrote: > Heikki Manninen wrote: >> On su, 2007-01-14 at 14:48 +0100, Klaus Schmidinger wrote: >> >>> Your CAM doesn't respond to the QUERY that VDR sends to it. >>> So VDR can't ask the CAM whether it is able to decrypt a certain >>> channel (in addition to others it is already decrypting). >>> So it's a hard-/firmware restriction of your CAM. >>> >>> The only CAM I have here that actually can decrypt more than one >>> channel is the Alphacrypt with firmware revision 3.09. >> Conax 4.00e is able to decrypt 2-3 channels at the same time. Although >> when used with VDR 1.5.0 it is not. Also when using previous versions of > > If the CAM doesn't respond to a QUERY, then how is VDR supposed to > know whether it can decrypt more than one channel at a time? Didn't mean that it is supposed to. Just informed you to let you (and others) now that sometimes it's possible :) >> VDR you have to fake fixed receiver number in the channels.conf for this >> to be possible - if you put in B00 it doesn't work anymore :) It's >> sometimes a bit unrealiable but works. > > VDR 1.4 used the FIRST/MORE/LAST method to send multiple CaPmts. > Since some CAMs apparently don't handle this correctly, I changed > that to the simpler ADD/UPDATE method, which should be supported > by any CAM that can decrypt more than one channel. > > Can you please check if there is a newer firmware for the Conax CAM > and maybe try that? Hmm.. have to try. Although I'm not aware how to do it. Should it be able to update from the broadcast signal? -- Heikki M
