Heikki Manninen wrote: > On su, 2007-01-14 at 14:48 +0100, Klaus Schmidinger wrote: > >> Your CAM doesn't respond to the QUERY that VDR sends to it. >> So VDR can't ask the CAM whether it is able to decrypt a certain >> channel (in addition to others it is already decrypting). >> So it's a hard-/firmware restriction of your CAM. >> >> The only CAM I have here that actually can decrypt more than one >> channel is the Alphacrypt with firmware revision 3.09. > > Conax 4.00e is able to decrypt 2-3 channels at the same time. Although > when used with VDR 1.5.0 it is not. Also when using previous versions of If the CAM doesn't respond to a QUERY, then how is VDR supposed to know whether it can decrypt more than one channel at a time? > VDR you have to fake fixed receiver number in the channels.conf for this > to be possible - if you put in B00 it doesn't work anymore :) It's > sometimes a bit unrealiable but works. VDR 1.4 used the FIRST/MORE/LAST method to send multiple CaPmts. Since some CAMs apparently don't handle this correctly, I changed that to the simpler ADD/UPDATE method, which should be supported by any CAM that can decrypt more than one channel. Can you please check if there is a newer firmware for the Conax CAM and maybe try that? Klaus
