Pulseaudio Discussion - Date Index

• Thread Index

• [PATCH] sink, source: Add a TODO comment about removing get_formats()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 5/5] bluetooth: Set device_info_valid to -1 when the device's adapter disappears
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 5/5] bluetooth: Set device_info_valid to -1 when the device's adapter disappears
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• card: Only set active_profile with available profile
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• DLNA sharing without gstlaunch
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• card: Only set active_profile with available profile
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• card: Only set active_profile with available profile
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• card: Only set active_profile with available profile
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/5] bluetooth: Use a helper function for setting device_info_valid
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 5/5] bluetooth: Set device_info_valid to -1 when the device's adapter disappears
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/5] bluetooth: Remove device_remove_all()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/5] bluetooth: Fire DEVICE_CONNECTION_CHANGED in set_device_info_valid()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/5] bluetooth: Don't mark device valid before it has an adapter
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/5] bluetooth: Use a helper function for setting device_info_valid
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Question regarding usage of pa_stream_peek() and pa_stream_drop()
  • From: nimesh.chanchani@xxxxxxxxxxxxx (nimesh.chanchani@xxxxxxxxxxxxx)
• how to change the payload type while rtp streaming.
  • From: anuj.work92@xxxxxxxxx (Anuj Jaiswal)
• [PATCH] tunnel-new: cork the stream when sink/source gets suspended and uncork it when resumed
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/4] sink/source: Try to pick known available ports first.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 3/4] sink/source: When picking the initial ports, prefer ones that are not unavailable.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 2/4] card: Try to pick known available profiles first.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 1/4] card: Ensure we still pick a profile even if it's unavailable.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• card: Only set active_profile with available profile
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] tunnel-new: add cookie module argument
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Patch review status wiki page updated
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Configurable Latency for DLNA / Network Audio Streaming
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Question regarding usage of pa_stream_peek() and pa_stream_drop()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Configurable Latency for DLNA / Network Audio Streaming
  • From: simon@xxxxxxxxxxxxxx (Simon Boulet)
• [PATCH] sink-input, source-output: Don't assume that proplist has been initialized in free()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Question regarding usage of pa_stream_peek() and pa_stream_drop()
  • From: nimesh.chanchani@xxxxxxxxxxxxx (nimesh.chanchani@xxxxxxxxxxxxx)
• [PATCH] sink-input, source-output: Don't assume that proplist has been initialized in free()
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] source-output: Log the format negotiation result
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] sink-input, source-output: Don't assume that proplist has been initialized in free()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/3] alsa-ucm: Add the ability to set modargs from UCM config
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/3] alsa-ucm: Drop support for PlaybackPCM on devices
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/3] modargs: Add a mechanism to append modargs
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [RFC 2/2] bluetooth: Rank profiles based on available flag
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [RFC 1/2] card: Rank profiles based on available flag
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 03/11] resampler: Change interface, resampler may return the number of leftover frames
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] core-util: Blame systemd for not setting up XDG_RUNTIME_DIR correctly
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 03/11] resampler: Change interface, resampler may return the number of leftover frames
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• [PATCH 03/11] resampler: Change interface, resampler may return the number of leftover frames
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Possible bug in pa_sink_input_request_rewind
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• resubmit reverted resampler patch
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• resubmit reverted resampler patch
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• PulseAudio 2.1-1 (Cygwin 64-bit): Failed to create secure directory: Unknown error 13
  • From: nithinmkurien@xxxxxxxxx (Nithin Kurien)
• module-x11-bell playback volume
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• [pulseaudio-discuss] make pulseaudio-aggregate-configure error for Android 4.2.2_r1.2
  • From: pm.atgrid@xxxxxxxxx (Jeff Wang)
• [PATCH 03/11] resampler: Change interface, resampler may return the number of leftover frames
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• Possible bug in pa_sink_input_request_rewind
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH 09/11] resampler: Extend fit_buf() helper to copy leftover data to new buffer
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• resubmit reverted resampler patch
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Patch review status wiki page updated
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] build-sys: Add an Android-friendly build system
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• make pulseaudio-aggregate-configure error for Android 4.2.2_r1.2
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Edinburgh Murphy meeting notes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 9/9] device-port: Generate monitor nodes for output ports
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 8/9] node: Generate a nice name for monitor nodes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 7/9] Create nodes for monitor sources
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 6/9] sink: Create the sink node before creating the monitor source
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 5/9] source: Initialize pa_source.monitor_of already in pa_source_new()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/9] Create nodes for sources
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/9] Create nodes for sinks
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/9] Create nodes for source outputs
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/9] Create nodes for sink inputs
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/9] Create more nodes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [pulseaudio-discuss] make pulseaudio-aggregate-configure error for Android 4.2.2_r1.2
  • From: pm.atgrid@xxxxxxxxx (Jeff Wang)
• [pulseaudio-discuss] Is it possible to connect to an existing stream using pulse audio?
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Is it possible to connect to an existing stream using pulse audio?
  • From: sathish1000@xxxxxxxxx (Sathishkumar)
• Edinburgh Murphy meeting notes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Is it possible to connect to an existing stream using pulse audio?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Edinburgh Murphy meeting notes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Edinburgh Murphy meeting notes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Is it possible to connect to an existing stream using pulse audio?
  • From: sathish1000@xxxxxxxxx (sathishkumar sivagurunathan)
• Sound Volume Setting At Login
  • From: marklapier@xxxxxxx (Mark LaPierre)
• Sound Volume Setting At Login
  • From: marklapier@xxxxxxx (Mark LaPierre)
• Edinburgh Murphy meeting notes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Sound Volume Setting At Login
  • From: weedy2887@xxxxxxxxx (Weedy)
• Edinburgh Murphy meeting notes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Edinburgh Murphy meeting notes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Edinburgh Murphy meeting notes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Sound Volume Setting At Login
  • From: marklapier@xxxxxxx (Mark LaPierre)
• [PATCH v2] card: Only set active_profile with available profile
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] introspect: Fix ABI break introduced by b98a2e1
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Sound Volume Setting At Login
  • From: weedy2887@xxxxxxxxx (Weedy)
• Sound Volume Setting At Login
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Edinburgh Murphy meeting notes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] build-sys: Add an Android-friendly build system
  • From: jjardon@xxxxxxxxx (Javier Jardón)
• [PATCH] introspect: Fix ABI break introduced by b98a2e1
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] introspect: Fix ABI break introduce by b98a2e1
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH] introspect: Fix ABI break introduce by b98a2e1
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] introspect: Fix ABI break introduce by b98a2e1
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH] introspect: Fix ABI break introduce by b98a2e1
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] introspect: Fix ABI break introduce by b98a2e1
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v2] card: Only set active_profile with available profile
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Sound Volume Setting At Login
  • From: marklapier@xxxxxxx (Mark LaPierre)
• Is This Getting Through?
  • From: marklapier@xxxxxxx (Mark LaPierre)
• Is This Getting Through?
  • From: marklapier@xxxxxxx (Mark LaPierre)
• [PATCH v2] alsa-mixer: Add internal surround speaker elements
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Patch review status
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] console-kit: Remove logging of every message on the bus
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 00/18] resampler: Refactor and cleanup
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] tests: Extract PA_CPU_TEST* macros to separate header
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] card: Only set active_profile with available profile
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• How to control playback start timing (RAOP)
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• How to control playback start timing (RAOP)
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Is This Getting Through?
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] card: Only set active_profile with available profile
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] card: Only set active_profile with available profile
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] card: Only set active_profile with available profile
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Pulseaudio function to access a client shown in the pavucontrol.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] card: Only set active_profile with available profile
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Pulseaudio function to access a client shown in the pavucontrol.
  • From: sathishkumar.sivagurunathan@xxxxxxxxx (Sathishkumar Sivagurunathan)
• Stuttering, pauses, and general crappiness
  • From: weedy2887@xxxxxxxxx (Weedy)
• [PATCH] card: Only set active_profile with available profile
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Question about pulseaudio sources and sinks
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH] console-kit: Remove logging of every message on the bus
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH 3/3] zsh-completion: Add --monitor-stream completion to pacat
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v2] simple: Improve pa_simple_read() documentation
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/5] Bluetooth polishing
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] Update the protocol version of the node interface
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/3] device-port: Add mechanism to free implementation data
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/3] zsh-completion: Add --monitor-stream completion to pacat
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• [PATCH 3/3] zsh-completion: Add --monitor-stream completion to pacat
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• resample_method argument for module-remap-*
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/6] modargs: Add pa_modargs_get_sample_rate()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] mainloop, glib-mainloop: time_restart could cause incorrect event ordering
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] resampler: clean up ffmpeg resampler buffering
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] tests: Resampler output memchunk may be reset (zero)
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 00/18] resampler: Refactor and cleanup
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• [PATCH 00/18] resampler: Refactor and cleanup
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Transporting sound from 'mpd' server to laptop
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Context error: Access denied
  • From: nimesh.chanchani@xxxxxxxxxxxxx (nimesh.chanchani@xxxxxxxxxxxxx)
• Facing errors while trying to install pulse audio 4.0
  • From: sathish1000@xxxxxxxxx (sathishkumar sivagurunathan)
• Loading modules..
  • From: sathish1000@xxxxxxxxx (sathishkumar sivagurunathan)
• [PATCH 3/3] build-sys: Add po/Makevars file for gettext options
  • From: jjardon@xxxxxxxxx (Javier Jardón)
• [PATCH 2/3] build-sys: Add -fdiagnostics-color=auto to CFLAGS
  • From: jjardon@xxxxxxxxx (Javier Jardón)
• [PATCH 1/3] build-sys: Use AM_CPPFLAGS instead of AM_CFLAGS for preprocessor arguments
  • From: jjardon@xxxxxxxxx (Javier Jardón)
• [PATCH 0/3] Some build fixes
  • From: jjardon@xxxxxxxxx (Javier Jardón)
• Sound Volume Setting At Login
  • From: marklapier@xxxxxxx (Mark LaPierre)
• [PATCH] mainloop, glib-mainloop: time_restart could cause incorrect event ordering
  • From: ben.brewer@xxxxxxxxxxxxxxx (Ben Brewer)
• Sound Volume Setting At Login
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Volume control for media players playing simultaneously
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Recording Example using Threaded Mainloop Async
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Volume control for media players playing simultaneously
  • From: sathishkumar.sivagurunathan@xxxxxxxxx (Sathishkumar Sivagurunathan)
• Recording Example using Threaded Mainloop Async
  • From: nimesh.chanchani@xxxxxxxxxxxxx (nimesh.chanchani@xxxxxxxxxxxxx)
• [PATCH] Updated Brazilian Portuguese translation
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] Updated Brazilian Portuguese translation
  • From: rafael.f.f1@xxxxxxxxx (Rafael Ferreira)
• [PATCH] Updated Brazilian Portuguese translation
  • From: rafael.f.f1@xxxxxxxxx (Rafael Ferreira)
• [PATCH 2/2] alsa: Add surround 2.1 profile
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/2] alsa: Use alsa-lib's channel mapping API to select the best channel map
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/2] Enable 2.1 surround over the channel mapping API
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Updated Brazilian Portuguese translation
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Murphy BoF in Edinburgh on October 23rd
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH] Updated Brazilian Portuguese translation
  • From: rafael.f.f1@xxxxxxxxx (Rafael Ferreira)
• Murphy BoF in Edinburgh on October 23rd
  • From: mail@xxxxxxxxxxxxxx (Timo Mueller)
• [PATCH] Documentation of known misuse of PulseAudio API
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Vulnerability in Webkit-GTK and PulseAudio volume handling
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• xubuntu 13.10 pulseaudio /run/user
  • From: poort@xxxxxxxxxx (duportail)
• How to control playback start timing (RAOP)
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• xubuntu 13.10 pulseaudio /run/user
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Transporting sound from 'mpd' server to laptop
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• Transporting sound from 'mpd' server to laptop
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• Transporting sound from 'mpd' server to laptop
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• xubuntu 13.10 pulseaudio /run/user
  • From: poort@xxxxxxxxxx (duportail)
• Transporting sound from 'mpd' server to laptop
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• Transporting sound from 'mpd' server to laptop
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• Transporting sound from 'mpd' server to laptop
  • From: weedy2887@xxxxxxxxx (Weedy)
• Transporting sound from 'mpd' server to laptop
  • From: leonerd@xxxxxxxxxxxxxx (Paul LeoNerd Evans)
• xubuntu 13.10 pulseaudio /run/user
  • From: poort@xxxxxxxxxx (duportail)
• How to control playback start timing (RAOP)
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• Is This Getting Through?
  • From: marklapier@xxxxxxx (Mark LaPierre)
• Using nodes as the primary routing mechanism
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Using nodes as the primary routing mechanism
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• pulseaudio hangs up when bluetooth headset disappears
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• pulseaudio hangs up when bluetooth headset disappears
  • From: brian@xxxxxxxxxxxxxxx (Brian J. Murrell)
• How to control playback start timing (RAOP)
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• How to control playback start timing (RAOP)
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• Is This Getting Through?
  • From: weedy2887@xxxxxxxxx (Weedy)
• Is This Getting Through?
  • From: marklapier@xxxxxxx (Mark LaPierre)
• [PATCH v2] alsa-mixer: Add internal surround speaker elements
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa-mixer: Add internal surround speaker elements
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• Murphy BoF in Edinburgh on October 23rd
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: Track discovery modules by index
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH] bluetooth: Track discovery modules by index
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Sound Volume Setting At Login
  • From: marklapier@xxxxxxx (Mark LaPierre)
• [PATCH] bluetooth: Track discovery modules by index
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH 1/2] build-sys: Don't define _FORTIFY_SOURCE when building with -O0
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/2] build-sys: Don't define _FORTIFY_SOURCE when building with -O0
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa-mixer: Add internal surround speaker elements
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/2] build-sys: Don't define _FORTIFY_SOURCE when building with -O0
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] alsa-mixer: Add internal surround speaker elements
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 1/2] build-sys: Don't define _FORTIFY_SOURCE when building with -O0
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/2] build-sys: Print CPPFLAGS in configure
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Using nodes as the primary routing mechanism
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Using nodes as the primary routing mechanism
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Using nodes as the primary routing mechanism
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Using nodes as the primary routing mechanism
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Sound Volume Setting At Login
  • From: marklapier@xxxxxxx (Mark LaPierre)
• [PATCH] sndfile-util: fix format for 24bit depth wav files
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/2] build-sys: Print CPPFLAGS in configure
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/2] build-sys: Don't define _FORTIFY_SOURCE when building with -O0
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Conditional defining of _FORTIFY_SOURCE
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] sndfile-util: fix format for 24bit depth wav files
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] sndfile-util: fix format for 24bit depth wav files
  • From: kiraank@xxxxxxxxx (Kiran Krishnappa)
• pulseaudio hangs up when bluetooth headset disappears
  • From: brian@xxxxxxxxxxxxxxx (Brian J. Murrell)
• Vulnerability in Webkit-GTK and PulseAudio volume handling
  • From: xrcalvar@xxxxxxxxxx (Xabier Rodríguez Calvar)
• [oss-security] Re: Vulnerability in Webkit-GTK and PulseAudio volume handling
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Question about pulseaudio sources and sinks
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Question about pulseaudio sources and sinks
  • From: poljarinho@xxxxxxxxx (Damir Jelić)
• Vulnerability in Webkit-GTK and PulseAudio volume handling
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Question about pulseaudio sources and sinks
  • From: jfwfreo@xxxxxxxxxxx (Jonathan Wilson)
• [PATCH] sndfile-util: fix format for 24bit depth wav files
  • From: kiraank@xxxxxxxxx (Kiran Krishnappa)
• Vulnerability in Webkit-GTK and PulseAudio volume handling
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Updated Brazilian Portuguese translation
  • From: rafael.f.f1@xxxxxxxxx (Rafael Ferreira)
• Translation update method
  • From: rafael.f.f1@xxxxxxxxx (Rafael Ferreira)
• [PATCH] sndfile-util: fix format for 24bit depth wav files
  • From: kiraank@xxxxxxxxx (Kiran Krishnappa)
• Translation update method
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Translation update method
  • From: rafael.f.f1@xxxxxxxxx (Rafael Ferreira)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH] sndfile-util: fix format for 24bit depth wav files
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] sndfile-util: fix format for 24bit depth wav files
  • From: kiraank@xxxxxxxxx (Kiran K)
• Vala arrays broken?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Vulnerability in Webkit-GTK and PulseAudio volume handling
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH] sndfile-util: fix format for 24bit depth wav files
  • From: kiraank@xxxxxxxxx (Kiran Krishnappa)
• [PATCH 3/3] alsa-ucm: Add the ability to set modargs from UCM config
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/3] alsa-ucm: Drop support for PlaybackPCM on devices
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 1/3] modargs: Add a mechanism to append modargs
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• connect pulse to jack - headless
  • From: len@xxxxxxxxxxxxx (Len Ovens)
• [PATCH] Support building pulseaudio with Android NDK
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 3/3] alsa-ucm: Support Playback/CaptureVolume
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• connect pulse to jack - headless
  • From: len@xxxxxxxxxxxxx (Len Ovens)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH 2/2] tunnel-sink-new: use *_new-style for thread_mq init
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v2] simple: Improve pa_simple_read() documentation
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• connect pulse to jack - headless
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• connect pulse to jack - headless
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH] simple: Improve pa_simple_read() documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] simple: Improve pa_simple_read() documentation
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] alsa-mixer: Drop all unused paths, not only unsupported paths
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Best Case Latency
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• [PATCH 4/5] bluetooth: Remove device_remove_all()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/5] bluetooth: Remove device_remove_all()
  • From: jjardon@xxxxxxxxx (Javier Jardón)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH 3/5] bluetooth: Fix notifying about new devices
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/5] bluetooth: Remove device_remove_all()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] Support building pulseaudio with Android NDK
  • From: glance@xxxxxxxxxx (Anton Lundin)
• [PATCH 5/5] bluetooth: Set device_info_valid to -1 when the device's adapter disappears
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 4/5] bluetooth: Remove device_remove_all()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Using nodes as the primary routing mechanism
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v5 16/39] bluetooth: Protect from a misbehaving bluetoothd
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 18/41] bluetooth: Parse BlueZ 5 device properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 3/5] bluetooth: Fix notifying about new devices
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Using nodes as the primary routing mechanism
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Using nodes as the primary routing mechanism
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/5] bluetooth: Fix variable constness
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v5 12/39] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v5 09/39] bluetooth: Create a function to remove only one adapter object
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Using nodes as the primary routing mechanism
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/5] bluetooth: Remove adapter_remove_all()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Using nodes as the primary routing mechanism
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH] default/system.pa: Do not load module-dbus-protocol
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/5] Bluetooth polishing
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v5 00/39] Refactor of BlueZ 5 support
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 3/3] alsa-ucm: Support Playback/CaptureVolume
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Simultaneous Audio Out
  • From: superquad.vortex2@xxxxxxxxx (Raymond Yau)
• [PATCH] build-sys: Add an Android-friendly build system
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] build-sys: Add an Android-friendly build system
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/3] hashmap: Add a key+value iterator
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 5/5] bluetooth: Set device_info_valid to -1 when the device's adapter disappears
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/5] bluetooth: Remove device_remove_all()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/5] bluetooth: Fix notifying about new devices
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/5] bluetooth: Fix variable constness
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/5] bluetooth: Remove adapter_remove_all()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/5] Bluetooth polishing
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 00/39] Refactor of BlueZ 5 support
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 36/39] bluetooth: Fail to load driver if discovery module is not loaded
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 16/39] bluetooth: Protect from a misbehaving bluetoothd
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] build-sys: Add an Android-friendly build system
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v5 12/39] bluetooth: Parse BlueZ 5 adapter properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 09/39] bluetooth: Create a function to remove only one adapter object
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 18/41] bluetooth: Parse BlueZ 5 device properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] Support pulseaudio as a submodule
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Support building pulseaudio with Android NDK
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Simultaneous Audio Out
  • From: rbroman@xxxxxxxxxxx (Randy Broman)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH] default/system.pa: Do not load module-dbus-protocol
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v4 18/41] bluetooth: Parse BlueZ 5 device properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Suggested coding style change for functions
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• PulseAudio Simple API exact timestamps
  • From: seeser@xxxxxxxxx (Seeser)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 36/41] bluetooth: Handle changes to BlueZ 5 transports state
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH] resampler: Revert to auto if the rates are equal and copy is chosen
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 3/3] alsa-ucm: Support Playback/CaptureVolume
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCHv2 59/60] bluetooth: Fail to load driver is discovery module is not loaded
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 36/41] bluetooth: Handle changes to BlueZ 5 transports state
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 18/41] bluetooth: Parse BlueZ 5 device properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: kevin.fox@xxxxxxxx (Fox, Kevin M)
• [PATCH v5 39/39] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 38/39] cli-command: Use pa_module_exists() in .ifexists
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 37/39] module: Create pa_module_exists()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 36/39] bluetooth: Fail to load driver if discovery module is not loaded
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 35/39] bluetooth: Implement get_n_used() for module-bluez5-device
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 34/39] bluetooth: Handle changes to BlueZ 5 transports state
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 33/39] bluetooth: Process source messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 32/39] bluetooth: Process sink messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 31/39] bluetooth: Create I/O thread function for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 30/39] bluetooth: Set card profile for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 29/39] bluetooth: Start / stop I/O thread for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 28/39] bluetooth: Create source for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 27/39] bluetooth: Create sink for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 26/39] bluetooth: Initialize profiles for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 25/39] bluetooth: Create BlueZ 5 card profile for each audio UUID
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 24/39] bluetooth: Create BlueZ 5 card ports
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 23/39] bluetooth: Create BlueZ 5 card
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 22/39] bluetooth: Unload module-bluez5-device on device's disconnection
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 21/39] bluetooth: Get BlueZ 5 device object
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 20/39] bluetooth: Create module-bluez5-device
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 19/39] bluetooth: Track devices in module-bluez5-discover
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 18/39] bluetooth: Handle PropertiesChanged for org.bluez.MediaTransport1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 17/39] bluetooth: Handle PropertiesChanged for org.bluez.Device1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 16/39] bluetooth: Protect from a misbehaving bluetoothd
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 15/39] bluetooth: Parse BlueZ 5 device properties
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 14/39] bluetooth: Handle PropertiesChanged for org.bluez.Adapter1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 13/39] bluetooth: Register endpoints with BlueZ 5 adapter
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 12/39] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 11/39] bluetooth: Parse BlueZ 5 D-Bus interfaces
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 10/39] bluetooth: Handle InterfacesAdded and InterfacesRemoved
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 09/39] bluetooth: Create a function to remove only one adapter object
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 08/39] bluetooth: Get managed objects
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 07/39] bluetooth: Add utility function to send D-Bus messages with reply
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 06/39] bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 05/39] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 04/39] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 03/39] bluetooth: Register MediaEndpoint1 objects with D-Bus
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 02/39] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 01/39] bluetooth: Remove all devices and adapters when org.bluez goes away
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v5 00/39] Refactor of BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 39/41] module: Create pa_module_exists()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 39/41] module: Create pa_module_exists()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 59/60] bluetooth: Fail to load driver is discovery module is not loaded
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 38/41] bluetooth: Fail to load driver is discovery module is not loaded
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 36/41] bluetooth: Handle changes to BlueZ 5 transports state
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 35/41] bluetooth: Process source messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 34/41] bluetooth: Process sink messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 16/41] bluetooth: Register endpoints with BlueZ 5 adapter
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Suggested coding style change for functions
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 18/41] bluetooth: Parse BlueZ 5 device properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 09/41] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH v4 09/41] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/3] alsa-ucm: Support Playback/CaptureVolume
  • From: eu@xxxxxxxxxxxxxxxxx (Felipe Tonello)
• Pulseaudio for Network Streaming without Virtual Soundcard Hardware ?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v4 09/41] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH] alsa-mixer: Drop all unused paths, not only unsupported paths
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Suggested coding style change for functions
  • From: poljarinho@xxxxxxxxx (Damir Jelić)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: poljarinho@xxxxxxxxx (Damir Jelić)
• Using nodes as the primary routing mechanism
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] Update the protocol version of the node interface
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Suggested coding style change for functions
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Suggested coding style change for functions
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa: Turn one assertion into two
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa: Turn one assertion into two
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] alsa: Turn one assertion into two
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 16/41] bluetooth: Register endpoints with BlueZ 5 adapter
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 09/41] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Pulseaudio for Network Streaming without Virtual Soundcard Hardware ?
  • From: P.Rynhart@xxxxxxxxxxxx (Patrick Rynhart)
• Pulseaudio for Network Streaming without Virtual Soundcard Hardware ?
  • From: P.Rynhart@xxxxxxxxxxxx (Patrick Rynhart)
• [PATCH v4 14/41] bluetooth: Parse BlueZ 5 D-Bus interfaces
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 16/41] bluetooth: Register endpoints with BlueZ 5 adapter
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 13/41] bluetooth: Handle InterfacesAdded and InterfacesRemoved
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 05/41] bluetooth: Remove all devices when org.bluez goes away
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4 09/41] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH v4.1 08/41] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 08/41] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 00/41] Refactor of BlueZ 5 support
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 39/41] module: Create pa_module_exists()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 39/41] module: Create pa_module_exists()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 38/41] bluetooth: Fail to load driver is discovery module is not loaded
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 36/41] bluetooth: Handle changes to BlueZ 5 transports state
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 35/41] bluetooth: Process source messages for BlueZ 5 cards
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 34/41] bluetooth: Process sink messages for BlueZ 5 cards
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 18/41] bluetooth: Parse BlueZ 5 device properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 14/41] bluetooth: Parse BlueZ 5 D-Bus interfaces
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 16/41] bluetooth: Register endpoints with BlueZ 5 adapter
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Suggested coding style change for functions
  • From: poljarinho@xxxxxxxxx (Damir Jelić)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 14/41] bluetooth: Parse BlueZ 5 D-Bus interfaces
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 13/41] bluetooth: Handle InterfacesAdded and InterfacesRemoved
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 09/41] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 08/41] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• An raop2 support
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• Suggested coding style change for functions
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH] sink: Increase max sink inputs per sink
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] sink: Increase max sink inputs per sink
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/3] device-port: Add mechanism to free implementation data
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/3] device-port: Add mechanism to free implementation data
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/3] hashmap: Add a key+value iterator
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/3] device-port: Add mechanism to free implementation data
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 1/3] hashmap: Add a key+value iterator
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/3] device-port: Add mechanism to free implementation data
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/3] hashmap: Add a key+value iterator
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] sink: Increase max sink inputs per sink
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 3/3] alsa-ucm: Support Playback/CaptureVolume
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/3] device-port: Add mechanism to free implementation data
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 1/3] hashmap: Add a key+value iterator
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v4 05/41] bluetooth: Remove all devices when org.bluez goes away
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Suggested coding style change for functions
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• Suggested coding style change for functions
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] sink: Increase max sink inputs per sink
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• An raop2 support
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] sink: Increase max sink inputs per sink
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• An raop2 support
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH] sink: Increase max sink inputs per sink
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Suggested coding style change for functions
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: poljarinho@xxxxxxxxx (Damir Jelić)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• Best Case Latency
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• An raop2 support
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• An raop2 support
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH 2/4] alsa-ucm: Don't probe UCM
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v4 41/41] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 40/41] cli-command: Use pa_module_exists() in .ifexists
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 39/41] module: Create pa_module_exists()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 38/41] bluetooth: Fail to load driver is discovery module is not loaded
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 37/41] bluetooth: Implement get_n_used() for module-bluez5-device
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 36/41] bluetooth: Handle changes to BlueZ 5 transports state
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 35/41] bluetooth: Process source messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 34/41] bluetooth: Process sink messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 33/41] bluetooth: Create I/O thread function for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 32/41] bluetooth: Set card profile for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 31/41] bluetooth: Start / stop I/O thread for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 30/41] bluetooth: Create source for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 29/41] bluetooth: Create sink for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 28/41] bluetooth: Initialize profiles for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 27/41] bluetooth: Create BlueZ 5 card profile for each audio UUID
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 26/41] bluetooth: Create BlueZ 5 card ports
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 25/41] bluetooth: Create BlueZ 5 card
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 24/41] bluetooth: Unload module-bluez5-device on device's disconnection
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 23/41] bluetooth: Get BlueZ 5 device object
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 22/41] bluetooth: Create module-bluez5-device
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 21/41] bluetooth: Track devices in module-bluez5-discover
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 20/41] bluetooth: Handle PropertiesChanged for org.bluez.MediaTransport1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 19/41] bluetooth: Handle PropertiesChanged for org.bluez.Device1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 18/41] bluetooth: Parse BlueZ 5 device properties
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 17/41] bluetooth: Handle PropertiesChanged for org.bluez.Adapter1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 16/41] bluetooth: Register endpoints with BlueZ 5 adapter
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 15/41] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 14/41] bluetooth: Parse BlueZ 5 D-Bus interfaces
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 13/41] bluetooth: Handle InterfacesAdded and InterfacesRemoved
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 12/41] bluetooth: Get managed objects
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 11/41] bluetooth: Add utility function to send D-Bus messages with reply
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 10/41] bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 09/41] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 08/41] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 07/41] bluetooth: Register MediaEndpoint1 objects with D-Bus
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 06/41] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 05/41] bluetooth: Remove all devices when org.bluez goes away
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 04/41] bluetooth: Create pa_bluetooth_device for BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 03/41] bluetooth: Create pa_bluetooth_adapter for BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 02/41] bluetooth: Create infrastrucure for bluetooth hooks
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 01/41] bluetooth: Track org.bluez for BlueZ 5
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH v4 00/41] Refactor of BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCH 2/4] alsa-ucm: Don't probe UCM
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/4] alsa-ucm: Don't probe UCM
  • From: eu@xxxxxxxxxxxxxxxxx (Felipe Tonello)
• [PATCHv2 55/60] bluetooth: Process sink messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH] Support building pulseaudio with Android NDK
  • From: glance@xxxxxxxxxx (Anton Lundin)
• [PATCH] Support pulseaudio as a submodule
  • From: glance@xxxxxxxxxx (Anton Lundin)
• [PATCH 4/4] alsa: Add module to talk to the Android audio hal to set up voice calls
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/4] card: Add hook before profile changes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/4] alsa-ucm: Don't probe UCM
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/4] alsa: Add extcon (Android switch) jack detection
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/4] Current Ubuntu phone patch set
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• tunnel-source-new compiler warning
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• tunnel-source-new compiler warning
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• tunnel-source-new compiler warning
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCHv2 60/60] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 44/60] bluetooth: Get BlueZ 5 device object
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH 44/60] bluetooth: Get BlueZ 5 device object
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• Best Case Latency
  • From: pshirkey@xxxxxxxxxxxxxxxxx (Patrick Shirkey)
• [PATCH 0/4] Build fixes
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v3 00/18] Add a basic node concept
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] alsa-ucm: Make combination port names deterministic
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• [PATCH] alsa-ucm: Make combination port names deterministic
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] hashmap: Add the ability to free keys
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] hashmap: Add the ability to free keys
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] hashmap: Add the ability to free keys
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] hashmap: Add the ability to free keys
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] tunnel-new: cork the stream when sink/source gets suspended and uncork it when resumed
  • From: lynxis@xxxxxxx (Alexander Couzens)
• [PATCH] tunnel-new: add cookie module argument
  • From: lynxis@xxxxxxx (Alexander Couzens)
• [PATCH 1/2] tunnel-sink-new: remove switch-default from state change callbacks
  • From: lynxis@xxxxxxx (Alexander Couzens)
• [PATCH 2/2] tunnel-sink-new: use *_new-style for thread_mq init
  • From: lynxis@xxxxxxx (Alexander Couzens)
• [PATCH 0/2] apply tunnel-source-new improvements on tunnel-sink-new
  • From: lynxis@xxxxxxx (Alexander Couzens)
• An raop2 support
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/4] build: Update ax_pthread macro
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• [PATCH 3/4] build: Silence warning about missing AC_LANG_SOURCE call in acx_libwrap.m4
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• [PATCH 2/4] build: Silence warning about missing AC_LANG_SOURCE call in configure.ac
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• [PATCH 1/4] build: Enable subdir-objects option
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• [PATCH 0/4] Build fixes
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• An raop2 support
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• An raop2 support
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH]raop2: Blocking UDP sockets
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH]raop2: Blocking UDP sockets
  • From: pulseaudio@xxxxxxxx (Matthias Wabersich)
• [PATCH]raop2: Blocking UDP sockets
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH]raop2: Blocking UDP sockets
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• [PATCHv2 55/60] bluetooth: Process sink messages for BlueZ 5 cards
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCHv2 60/60] bluetooth: Revive module-bluetooth-discover
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCHv2 44/60] bluetooth: Get BlueZ 5 device object
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] hashmap: Add the ability to free keys
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH]raop2: Blocking UDP sockets
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• An raop2 support
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• An raop2 support
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [RFCv3 43/43] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 42/43] cli-command: Use pa_module_exists() in .ifexists
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 41/43] module: Create pa_module_exists()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 40/43] bluetooth: Fail to load driver is discovery module is not loaded
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 39/43] bluetooth: Implement get_n_used() for module-bluez5-device
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 38/43] bluetooth: Handle changes to BlueZ 5 transports state
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 37/43] bluetooth: Process source messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 36/43] bluetooth: Process sink messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 35/43] bluetooth: Create I/O thread function for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 34/43] bluetooth: Set card profile for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 33/43] bluetooth: Start / stop I/O thread for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 32/43] bluetooth: Create source for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 31/43] bluetooth: Create sink for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 30/43] bluetooth: Initialize profiles for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 29/43] bluetooth: Create BlueZ 5 card profile for each audio UUID
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 28/43] bluetooth: Create BlueZ 5 card ports
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 27/43] bluetooth: Create BlueZ 5 card
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 26/43] bluetooth: Unload module-bluez5-device on device's disconnection
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 25/43] bluetooth: Get BlueZ 5 device object
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 24/43] bluetooth: Create module-bluez5-device
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 23/43] bluetooth: Track devices in module-bluez5-discover
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 22/43] bluetooth: Handle PropertiesChanged for org.bluez.MediaTransport1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 21/43] bluetooth: Handle PropertiesChanged for org.bluez.Device1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 20/43] FIXUP: Change parse_device_property() to return void
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 19/43] FIXUP: Handle device information arriving before the adapter information
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 18/43] bluetooth: Parse BlueZ 5 device properties
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 17/43] bluetooth: Handle PropertiesChanged for org.bluez.Adapter1
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 16/43] bluetooth: Register endpoints with BlueZ 5 adapter
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 15/43] bluetooth: Parse BlueZ 5 adapter properties
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 14/43] bluetooth: Parse BlueZ 5 D-Bus interfaces
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 13/43] bluetooth: Handle InterfacesAdded and InterfacesRemoved
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 12/43] bluetooth: Get managed objects
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 11/43] bluetooth: Add utility function to send D-Bus messages with reply
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 10/43] bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 09/43] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 08/43] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 07/43] bluetooth: Register MediaEndpoint1 objects with D-Bus
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 06/43] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 05/43] bluetooth: Remove all devices when org.bluez goes away
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 04/43] bluetooth: Create pa_bluetooth_device for BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 03/43] bluetooth: Create pa_bluetooth_adapter for BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 02/43] bluetooth: Create infrastrucure for bluetooth hooks
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 01/43] bluetooth: Track org.bluez for BlueZ 5
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [RFCv3 00/43] Refactor of BlueZ 5 support
  • From: jprvita@xxxxxxxxx (jprvita@xxxxxxxxx)
• [PATCHv2 56/60] bluetooth: Process source messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 55/60] bluetooth: Process sink messages for BlueZ 5 cards
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 60/60] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 60/60] bluetooth: Revive module-bluetooth-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 48/60] bluetooth: Create BlueZ 5 card profile for each audio UUID
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 44/60] bluetooth: Get BlueZ 5 device object
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 42/60] bluetooth: Track devices in module-bluez5-discover
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 40/60] bluetooth: Handle PropertiesChanged for org.bluez.Device1
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCHv2 39/60] bluetooth: Parse BlueZ 5 device properties
  • From: jprvita@xxxxxxxxx (João Paulo Rechi Vita)
• [PATCH] suspend-on-idle: Allow disabling suspending for specific devices
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] suspend-on-idle: Allow disabling suspending for specific devices
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] suspend-on-idle: Allow disabling suspending for specific devices
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH] suspend-on-idle: Allow disabling suspending for specific devices
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] tunnel-source-new: counterpart to module-tunnel-sink-new
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• [PATCH]raop2: Blocking UDP sockets (was: An raop2 support)
  • From: pulseaudio@xxxxxxxx (Matthias Wabersich)
• fedora 17 yum upgrade
  • From: brendan.jones.it@xxxxxxxxx (Brendan Jones)
• fedora 17 yum upgrade
  • From: jim@xxxxxxxxxxxx (Jim Duda)
• [PATCH] tunnel-source-new: counterpart to module-tunnel-sink-new
  • From: lynxis@xxxxxxx (Alexander Couzens)
• [PATCH] resampler: Revert to auto if the rates are equal and copy is chosen
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• An raop2 support
  • From: pulseaudio@xxxxxxxx (Matthias Wabersich)
• An raop2 support
  • From: glance@xxxxxxxxxx (Anton Lundin)
• [PATCH] log: Add support for the systemd journal
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• [PATCH] log: Add support for the systemd journal
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] tunnel-sink/source-new: add cookie argument
  • From: lynxis@xxxxxxx (Alexander Couzens)
• [PATCH] log: Add support for the systemd journal
  • From: poljarinho@xxxxxxxxx (poljar (Damir Jelić))
• Passthrough support and sink channel count
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Passthrough support and sink channel count
  • From: anssi.hannula@xxxxxx (Anssi Hannula)
• Passthrough support and sink channel count
  • From: tanu.kaskinen@xxxxxxxxxxxxxxx (Tanu Kaskinen)
• Pulse Audio and VNC
  • From: Minh.Le@xxxxxxxxxxxxx (Minh Le)