Nanag,
Can you please tell me how i can debug the various source file of pjmedia or
pjsip library. For example : i have tried to debug g729.c as well as gsm.c
by using the line
PJ_LOG(4,(THIS_FILE, "............writing
something........"));
this should be shown in the log file ....right?
I have put the in
pjmedia_codec_g729_init( pjmedia_endpt *endpt ) and
pjmedia_codec_gsm_init( pjmedia_endpt *endpt ) function...
but no result is shown in the log file. actually this is not the right
debugging procedure..
so how can i understand whether any function is being called or not... can
you please clarify
me....
Regards
OPu
On Mon, Nov 10, 2008 at 2:09 PM, Nanang Izzuddin <nanang at pjsip.org> wrote:
> It seems the g729_enum_codecs() is well defined. So please make sure
> that pjmedia_codec_g729_init() is called, e.g: set
> PJMEDIA_HAS_G729_CODEC to 1 in your config_site.h.
>
> Regards,
> nanang
>
>
> On Sun, Nov 9, 2008 at 2:11 PM, S. M. Nazmul Hasan (Opu)
> <apus29 at gmail.com> wrote:
> > Hi Nanang,
> >
> > I have tested it to make a self call and getting 488(Not acceptable here)
> > response. i saw
> > the log file and the sdp , there speex, gsm , pcma and pcmu only presents
> .
> > and no g729.
> > so it looks like that g729 is not registered. and server rejected the
> call.
> >
> > I have checked the log file of server , there was a message:
> >
> > No compatible codecs, not accepting this offer!
> >
> > please give me a suggestion.
> >
> > Thanks
> >
> > opu
> >
> > On Thu, Nov 6, 2008 at 4:26 PM, Nanang Izzuddin <nanang at pjsip.org>
> wrote:
> >>
> >> Hi,
> >>
> >> I think it would be better if you see the log file in the rejecting
> >> side (it can be the proxy/asterisk or x-lite) to see why it rejected
> >> the call. If you have pjsua with IPP enabled, you can just make a call
> >> to the pjsua and send along the pjsua log file.
> >>
> >> The log file in the Symbian side may help, but I am not sure it will
> >> help a lot, however to generate the log file on Symbian, just specify
> >> log filename in logging config for the pjsua_init(), e.g:
> >> log_cfg.log_filename = pj_str("c:\\data\\pjsua.log");
> >>
> >> Regards,
> >> nanang
> >>
> >>
> >> On Thu, Nov 6, 2008 at 3:02 PM, S. M. Nazmul Hasan (Opu)
> >> <apus29 at gmail.com> wrote:
> >> > Hi Nanag,
> >> >
> >> > Yes the other endpoint supports g729. my tested environment was:
> >> >
> >> > server: AsteriskNow (which supports g729)
> >> > client: pjsip (symbian_ua_gui) and Xlite Pro(which supports g729)
> >> >
> >> > 1. when i am using both endpoint as Xlite pro and fixing the codec as
> >> > g729
> >> > only then both using g729 and call established fine.
> >> >
> >> > 2. But when i am trying with symbian_ua_gui with Xlite Pro fixing the
> >> > codec
> >> > to g729 then i am getting 488(Not acceptable here) response.
> >> >
> >> > Can you please tell me how can I get the log file for No. 2 test
> >> > criteria.
> >> >
> >> > Thanks
> >> >
> >> > Opu
> >> >
> >> > On Wed, Nov 5, 2008 at 5:00 PM, Nanang Izzuddin <nanang at pjsip.org>
> >> > wrote:
> >> >>
> >> >> Hi,
> >> >>
> >> >> Just in case, please make sure the other endpoint supports G729 too,
> >> >> e.g: make a call to PJSUA on desktop with IPP G729 enabled. And
> please
> >> >> check the pjsua log, see if G729 is in the INVITE SDP. If it is
> >> >> rejected, you may see the reason in the pjsua log.
> >> >>
> >> >> Regards,
> >> >> nanang
> >> >>
> >> >>
> >> >> On Wed, Nov 5, 2008 at 1:39 PM, S. M. Nazmul Hasan (Opu)
> >> >> <apus29 at gmail.com> wrote:
> >> >> > Nanag,
> >> >> >
> >> >> > I think so Nanang, may be its not registering because i am getting
> >> >> > response
> >> >> > 488(Not acceptable here). But i did it register and unregister in
> >> >> > pjsua_media.c.
> >> >> >
> >> >> > Can you please see these files.
> >> >> >
> >> >> > Thanks
> >> >> >
> >> >> > Opu
> >> >> >
> >> >> > On Tue, Nov 4, 2008 at 10:18 PM, Nanang Izzuddin <nanang at pjsip.org
> >
> >> >> > wrote:
> >> >> >>
> >> >> >> Hi,
> >> >> >>
> >> >> >> Just did a quick skimming, things I can found so far:
> >> >> >> 1. For 8000kbps and 10ms frame time, the encoded frame size should
> >> >> >> be
> >> >> >> 10 bytes, not 20 bytes.
> >> >> >> 2. this line:
> >> >> >> pcm_in += 160;
> >> >> >> should be:
> >> >> >> pcm_in += 80;
> >> >> >>
> >> >> >> Numbers in a codec wrapper are very important, so please check and
> >> >> >> recheck carefully.
> >> >> >>
> >> >> >> Regards,
> >> >> >> nanang
> >> >> >>
> >> >> >>
> >> >> >> On Tue, Nov 4, 2008 at 8:42 PM, S. M. Nazmul Hasan (Opu)
> >> >> >> <apus29 at gmail.com> wrote:
> >> >> >> > Dear Rawshan,
> >> >> >> >
> >> >> >> > Can you please check the file if it is ok to add voiceage g729
> in
> >> >> >> > pjsip
> >> >> >> > for
> >> >> >> > symbian. i am trying this for several days but i can get it
> >> >> >> > working
> >> >> >> > for
> >> >> >> > me.
> >> >> >> >
> >> >> >> > Help from anyone would be great appretiable.
> >> >> >> >
> >> >> >> > Thanks
> >> >> >> >
> >> >> >> > On Mon, Nov 3, 2008 at 3:17 PM, Rawshan Iajdani
> >> >> >> > <iajdani at provati.com>
> >> >> >> > wrote:
> >> >> >> >>
> >> >> >> >> You should be able to do that in pjlib/include/pj/config_site.h
> >> >> >> >> and
> >> >> >> >> pjmedia/include/pjmedia-codec/config.h file. But always
> remember
> >> >> >> >> config_site.h settings will overwrite any settings done in
> >> >> >> >> config.h
> >> >> >> >> file.
> >> >> >> >> Good luck?
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> From: pjsip-bounces@xxxxxxxxxxxxxxx
> >> >> >> >> [mailto:pjsip-bounces at lists.pjsip.org]
> >> >> >> >> On Behalf Of S. M. Nazmul Hasan (Opu)
> >> >> >> >> Sent: Saturday, November 01, 2008 6:01 PM
> >> >> >> >> To: pjsip list
> >> >> >> >> Subject: Re: g729 codec
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> Thanks Lajdani. My jumped start is running well.
> >> >> >> >>
> >> >> >> >> I am using Brekeke sip server to check the active session. and
> i
> >> >> >> >> am
> >> >> >> >> getting the using codec (payload) is always PCMU/8000. even
> >> >> >> >> after
> >> >> >> >> changing
> >> >> >> >> the g729 for highest priority.
> >> >> >> >>
> >> >> >> >> pj_str_t codec_id = pj_str("g729");
> >> >> >> >> pjmedia_codec_mgr_set_codec_priority(
> >> >> >> >>
> pjmedia_endpt_get_codec_mgr(pjsua_var.med_endpt),
> >> >> >> >> &codec_id, PJMEDIA_CODEC_PRIO_HIGHEST);
> >> >> >> >>
> >> >> >> >> when i changed it to PJMEDIA_CODEC_PRIO_LOWEST the result was
> >> >> >> >> same.
> >> >> >> >> even
> >> >> >> >> after disabling all the codecs and after deleting all g711
> files
> >> >> >> >> and
> >> >> >> >> related
> >> >> >> >> fields it showed the payload is PCMU/8000.
> >> >> >> >>
> >> >> >> >> How can i easily disable all the codecs except g729.
> >> >> >> >>
> >> >> >> >> Thanks
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> On Thu, Oct 30, 2008 at 3:43 AM, Rawshan Iajdani
> >> >> >> >> <iajdani at provati.com>
> >> >> >> >> wrote:
> >> >> >> >>
> >> >> >> >> Well.. your attribute settings seems fine. For the 33 it will
> be
> >> >> >> >> 20.
> >> >> >> >> And
> >> >> >> >> in place of 320, it will be 160.. hope this will give u a jump
> >> >> >> >> start..
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> Rawshan Iajdani
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> From: pjsip-bounces@xxxxxxxxxxxxxxx
> >> >> >> >> [mailto:pjsip-bounces at lists.pjsip.org]
> >> >> >> >> On Behalf Of S. M. Nazmul Hasan (Opu)
> >> >> >> >> Sent: Wednesday, October 29, 2008 6:12 PM
> >> >> >> >> To: pjsip list
> >> >> >> >> Subject: g729 codec
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> Hi Benny,
> >> >> >> >>
> >> >> >> >> I am trying to add voice-age g729 codec with PJSIP for symbian.
> >> >> >> >> but
> >> >> >> >> i
> >> >> >> >> am
> >> >> >> >> getting some difficulties while following the gsm.c file.
> >> >> >> >>
> >> >> >> >> 1. while creating g729 codec private data
> >> >> >> >> what should i declare in replace of
> >> >> >> >> // struct gsm_state *encoder;
> >> >> >> >> // struct gsm_state *decoder;
> >> >> >> >>
> >> >> >> >> in "l16.c" its only use the frame size ..
> >> >> >> >>
> >> >> >> >> 2. in Generate default attribute.
> >> >> >> >>
> >> >> >> >> i have changed the value to this. is it ok?
> >> >> >> >> attr->info.clock_rate = 8000;
> >> >> >> >> attr->info.channel_cnt = 1;
> >> >> >> >> attr->info.avg_bps = 8000;
> >> >> >> >> attr->info.max_bps = 8000;
> >> >> >> >> attr->info.pcm_bits_per_sample = 16;
> >> >> >> >> attr->info.frm_ptime = 10;
> >> >> >> >>
> >> >> >> >> 3. In gsm.c there is some hard coding in gsm_codec_parse(
> >> >> >> >> -- what will be the value in replace of "33" here
> >> >> >> >>
> >> >> >> >> 4. frame_size and sample_per_frame are also not clear to me..
> >> >> >> >>
> >> >> >> >> Sorry for lot of questions and may be those are lot easier to
> >> >> >> >> ask..
> >> >> >> >> but
> >> >> >> >> really i am not good in codec..
> >> >> >> >>
> >> >> >> >> waiting for reply.
> >> >> >> >>
> >> >> >> >> Thanks
> >> >> >> >>
> >> >> >> >> S. M. Nazmul Hasan Opu
> >> >> >> >> Software Engineer
> >> >> >> >> R & D Application
> >> >> >> >> Dhaka, Bangladesh
> >> >> >> >> Mob: +880 1712 901 764
> >> >> >> >>
> >> >> >> >> _______________________________________________
> >> >> >> >> Visit our blog: http://blog.pjsip.org
> >> >> >> >>
> >> >> >> >> pjsip mailing list
> >> >> >> >> pjsip at lists.pjsip.org
> >> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> --
> >> >> >> >> S. M. Nazmul Hasan Opu
> >> >> >> >> Software Engineer
> >> >> >> >> R & D Application
> >> >> >> >> Dhaka, Bangladesh
> >> >> >> >> Mob: +880 1712 901 764
> >> >> >> >>
> >> >> >> >> _______________________________________________
> >> >> >> >> Visit our blog: http://blog.pjsip.org
> >> >> >> >>
> >> >> >> >> pjsip mailing list
> >> >> >> >> pjsip at lists.pjsip.org
> >> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >> >> >> >>
> >> >> >> >
> >> >> >> >
> >> >> >> >
> >> >> >> > --
> >> >> >> > S. M. Nazmul Hasan Opu
> >> >> >> > Software Engineer
> >> >> >> > R & D Application
> >> >> >> > Dhaka, Bangladesh
> >> >> >> > Mob: +880 1712 901 764
> >> >> >> >
> >> >> >> > _______________________________________________
> >> >> >> > Visit our blog: http://blog.pjsip.org
> >> >> >> >
> >> >> >> > pjsip mailing list
> >> >> >> > pjsip at lists.pjsip.org
> >> >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >> >> >> >
> >> >> >> >
> >> >> >>
> >> >> >> _______________________________________________
> >> >> >> Visit our blog: http://blog.pjsip.org
> >> >> >>
> >> >> >> pjsip mailing list
> >> >> >> pjsip at lists.pjsip.org
> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > S. M. Nazmul Hasan Opu
> >> >> > Software Engineer
> >> >> > R & D Application
> >> >> > Dhaka, Bangladesh
> >> >> > Mob: +880 1712 901 764
> >> >> >
> >> >> > _______________________________________________
> >> >> > Visit our blog: http://blog.pjsip.org
> >> >> >
> >> >> > pjsip mailing list
> >> >> > pjsip at lists.pjsip.org
> >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >> >> >
> >> >> >
> >> >>
> >> >> _______________________________________________
> >> >> Visit our blog: http://blog.pjsip.org
> >> >>
> >> >> pjsip mailing list
> >> >> pjsip at lists.pjsip.org
> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >> >
> >> >
> >> >
> >> > --
> >> > S. M. Nazmul Hasan Opu
> >> > Software Engineer
> >> > R & D Application
> >> > Dhaka, Bangladesh
> >> > Mob: +880 1712 901 764
> >> >
> >> > _______________________________________________
> >> > Visit our blog: http://blog.pjsip.org
> >> >
> >> > pjsip mailing list
> >> > pjsip at lists.pjsip.org
> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >> >
> >> >
> >>
> >> _______________________________________________
> >> Visit our blog: http://blog.pjsip.org
> >>
> >> pjsip mailing list
> >> pjsip at lists.pjsip.org
> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >
> >
> >
> > --
> > S. M. Nazmul Hasan Opu
> > Software Engineer
> > R & D Application
> > Dhaka, Bangladesh
> > Mob: +880 1712 901 764
> >
> > _______________________________________________
> > Visit our blog: http://blog.pjsip.org
> >
> > pjsip mailing list
> > pjsip at lists.pjsip.org
> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >
> >
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
--
S. M. Nazmul Hasan Opu
Software Engineer
R & D Application
Dhaka, Bangladesh
Mob: +880 1712 901 764
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20081110/54197cf9/attachment-0001.html>
