Hi Nanag, Yes the other endpoint supports g729. my tested environment was: server: AsteriskNow (which supports g729) client: pjsip (symbian_ua_gui) and Xlite Pro(which supports g729) 1. when i am using both endpoint as Xlite pro and fixing the codec as g729 only then both using g729 and call established fine. 2. But when i am trying with symbian_ua_gui with Xlite Pro fixing the codec to g729 then i am getting 488(Not acceptable here) response. Can you please tell me how can I get the log file for No. 2 test criteria. Thanks Opu On Wed, Nov 5, 2008 at 5:00 PM, Nanang Izzuddin <nanang at pjsip.org> wrote: > Hi, > > Just in case, please make sure the other endpoint supports G729 too, > e.g: make a call to PJSUA on desktop with IPP G729 enabled. And please > check the pjsua log, see if G729 is in the INVITE SDP. If it is > rejected, you may see the reason in the pjsua log. > > Regards, > nanang > > > On Wed, Nov 5, 2008 at 1:39 PM, S. M. Nazmul Hasan (Opu) > <apus29 at gmail.com> wrote: > > Nanag, > > > > I think so Nanang, may be its not registering because i am getting > response > > 488(Not acceptable here). But i did it register and unregister in > > pjsua_media.c. > > > > Can you please see these files. > > > > Thanks > > > > Opu > > > > On Tue, Nov 4, 2008 at 10:18 PM, Nanang Izzuddin <nanang at pjsip.org> > wrote: > >> > >> Hi, > >> > >> Just did a quick skimming, things I can found so far: > >> 1. For 8000kbps and 10ms frame time, the encoded frame size should be > >> 10 bytes, not 20 bytes. > >> 2. this line: > >> pcm_in += 160; > >> should be: > >> pcm_in += 80; > >> > >> Numbers in a codec wrapper are very important, so please check and > >> recheck carefully. > >> > >> Regards, > >> nanang > >> > >> > >> On Tue, Nov 4, 2008 at 8:42 PM, S. M. Nazmul Hasan (Opu) > >> <apus29 at gmail.com> wrote: > >> > Dear Rawshan, > >> > > >> > Can you please check the file if it is ok to add voiceage g729 in > pjsip > >> > for > >> > symbian. i am trying this for several days but i can get it working > for > >> > me. > >> > > >> > Help from anyone would be great appretiable. > >> > > >> > Thanks > >> > > >> > On Mon, Nov 3, 2008 at 3:17 PM, Rawshan Iajdani <iajdani at provati.com> > >> > wrote: > >> >> > >> >> You should be able to do that in pjlib/include/pj/config_site.h and > >> >> pjmedia/include/pjmedia-codec/config.h file. But always remember > >> >> config_site.h settings will overwrite any settings done in config.h > >> >> file. > >> >> Good luck? > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> From: pjsip-bounces@xxxxxxxxxxxxxxx > >> >> [mailto:pjsip-bounces at lists.pjsip.org] > >> >> On Behalf Of S. M. Nazmul Hasan (Opu) > >> >> Sent: Saturday, November 01, 2008 6:01 PM > >> >> To: pjsip list > >> >> Subject: Re: g729 codec > >> >> > >> >> > >> >> > >> >> Thanks Lajdani. My jumped start is running well. > >> >> > >> >> I am using Brekeke sip server to check the active session. and i am > >> >> getting the using codec (payload) is always PCMU/8000. even after > >> >> changing > >> >> the g729 for highest priority. > >> >> > >> >> pj_str_t codec_id = pj_str("g729"); > >> >> pjmedia_codec_mgr_set_codec_priority( > >> >> pjmedia_endpt_get_codec_mgr(pjsua_var.med_endpt), > >> >> &codec_id, PJMEDIA_CODEC_PRIO_HIGHEST); > >> >> > >> >> when i changed it to PJMEDIA_CODEC_PRIO_LOWEST the result was same. > >> >> even > >> >> after disabling all the codecs and after deleting all g711 files and > >> >> related > >> >> fields it showed the payload is PCMU/8000. > >> >> > >> >> How can i easily disable all the codecs except g729. > >> >> > >> >> Thanks > >> >> > >> >> > >> >> > >> >> On Thu, Oct 30, 2008 at 3:43 AM, Rawshan Iajdani < > iajdani at provati.com> > >> >> wrote: > >> >> > >> >> Well.. your attribute settings seems fine. For the 33 it will be 20. > >> >> And > >> >> in place of 320, it will be 160.. hope this will give u a jump > start.. > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> Rawshan Iajdani > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> From: pjsip-bounces@xxxxxxxxxxxxxxx > >> >> [mailto:pjsip-bounces at lists.pjsip.org] > >> >> On Behalf Of S. M. Nazmul Hasan (Opu) > >> >> Sent: Wednesday, October 29, 2008 6:12 PM > >> >> To: pjsip list > >> >> Subject: g729 codec > >> >> > >> >> > >> >> > >> >> Hi Benny, > >> >> > >> >> I am trying to add voice-age g729 codec with PJSIP for symbian. but i > >> >> am > >> >> getting some difficulties while following the gsm.c file. > >> >> > >> >> 1. while creating g729 codec private data > >> >> what should i declare in replace of > >> >> // struct gsm_state *encoder; > >> >> // struct gsm_state *decoder; > >> >> > >> >> in "l16.c" its only use the frame size .. > >> >> > >> >> 2. in Generate default attribute. > >> >> > >> >> i have changed the value to this. is it ok? > >> >> attr->info.clock_rate = 8000; > >> >> attr->info.channel_cnt = 1; > >> >> attr->info.avg_bps = 8000; > >> >> attr->info.max_bps = 8000; > >> >> attr->info.pcm_bits_per_sample = 16; > >> >> attr->info.frm_ptime = 10; > >> >> > >> >> 3. In gsm.c there is some hard coding in gsm_codec_parse( > >> >> -- what will be the value in replace of "33" here > >> >> > >> >> 4. frame_size and sample_per_frame are also not clear to me.. > >> >> > >> >> Sorry for lot of questions and may be those are lot easier to ask.. > but > >> >> really i am not good in codec.. > >> >> > >> >> waiting for reply. > >> >> > >> >> Thanks > >> >> > >> >> S. M. Nazmul Hasan Opu > >> >> Software Engineer > >> >> R & D Application > >> >> Dhaka, Bangladesh > >> >> Mob: +880 1712 901 764 > >> >> > >> >> _______________________________________________ > >> >> Visit our blog: http://blog.pjsip.org > >> >> > >> >> pjsip mailing list > >> >> pjsip at lists.pjsip.org > >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >> >> > >> >> > >> >> -- > >> >> S. M. Nazmul Hasan Opu > >> >> Software Engineer > >> >> R & D Application > >> >> Dhaka, Bangladesh > >> >> Mob: +880 1712 901 764 > >> >> > >> >> _______________________________________________ > >> >> Visit our blog: http://blog.pjsip.org > >> >> > >> >> pjsip mailing list > >> >> pjsip at lists.pjsip.org > >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >> >> > >> > > >> > > >> > > >> > -- > >> > S. M. Nazmul Hasan Opu > >> > Software Engineer > >> > R & D Application > >> > Dhaka, Bangladesh > >> > Mob: +880 1712 901 764 > >> > > >> > _______________________________________________ > >> > Visit our blog: http://blog.pjsip.org > >> > > >> > pjsip mailing list > >> > pjsip at lists.pjsip.org > >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >> > > >> > > >> > >> _______________________________________________ > >> Visit our blog: http://blog.pjsip.org > >> > >> pjsip mailing list > >> pjsip at lists.pjsip.org > >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > -- > > S. M. Nazmul Hasan Opu > > Software Engineer > > R & D Application > > Dhaka, Bangladesh > > Mob: +880 1712 901 764 > > > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org > > > > pjsip mailing list > > pjsip at lists.pjsip.org > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > -- S. M. Nazmul Hasan Opu Software Engineer R & D Application Dhaka, Bangladesh Mob: +880 1712 901 764 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20081106/8f8bb054/attachment-0001.html>
