Hi,
I think it would be better if you see the log file in the rejecting
side (it can be the proxy/asterisk or x-lite) to see why it rejected
the call. If you have pjsua with IPP enabled, you can just make a call
to the pjsua and send along the pjsua log file.
The log file in the Symbian side may help, but I am not sure it will
help a lot, however to generate the log file on Symbian, just specify
log filename in logging config for the pjsua_init(), e.g:
log_cfg.log_filename = pj_str("c:\\data\\pjsua.log");
Regards,
nanang
On Thu, Nov 6, 2008 at 3:02 PM, S. M. Nazmul Hasan (Opu)
<apus29 at gmail.com> wrote:
> Hi Nanag,
>
> Yes the other endpoint supports g729. my tested environment was:
>
> server: AsteriskNow (which supports g729)
> client: pjsip (symbian_ua_gui) and Xlite Pro(which supports g729)
>
> 1. when i am using both endpoint as Xlite pro and fixing the codec as g729
> only then both using g729 and call established fine.
>
> 2. But when i am trying with symbian_ua_gui with Xlite Pro fixing the codec
> to g729 then i am getting 488(Not acceptable here) response.
>
> Can you please tell me how can I get the log file for No. 2 test criteria.
>
> Thanks
>
> Opu
>
> On Wed, Nov 5, 2008 at 5:00 PM, Nanang Izzuddin <nanang at pjsip.org> wrote:
>>
>> Hi,
>>
>> Just in case, please make sure the other endpoint supports G729 too,
>> e.g: make a call to PJSUA on desktop with IPP G729 enabled. And please
>> check the pjsua log, see if G729 is in the INVITE SDP. If it is
>> rejected, you may see the reason in the pjsua log.
>>
>> Regards,
>> nanang
>>
>>
>> On Wed, Nov 5, 2008 at 1:39 PM, S. M. Nazmul Hasan (Opu)
>> <apus29 at gmail.com> wrote:
>> > Nanag,
>> >
>> > I think so Nanang, may be its not registering because i am getting
>> > response
>> > 488(Not acceptable here). But i did it register and unregister in
>> > pjsua_media.c.
>> >
>> > Can you please see these files.
>> >
>> > Thanks
>> >
>> > Opu
>> >
>> > On Tue, Nov 4, 2008 at 10:18 PM, Nanang Izzuddin <nanang at pjsip.org>
>> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> Just did a quick skimming, things I can found so far:
>> >> 1. For 8000kbps and 10ms frame time, the encoded frame size should be
>> >> 10 bytes, not 20 bytes.
>> >> 2. this line:
>> >> pcm_in += 160;
>> >> should be:
>> >> pcm_in += 80;
>> >>
>> >> Numbers in a codec wrapper are very important, so please check and
>> >> recheck carefully.
>> >>
>> >> Regards,
>> >> nanang
>> >>
>> >>
>> >> On Tue, Nov 4, 2008 at 8:42 PM, S. M. Nazmul Hasan (Opu)
>> >> <apus29 at gmail.com> wrote:
>> >> > Dear Rawshan,
>> >> >
>> >> > Can you please check the file if it is ok to add voiceage g729 in
>> >> > pjsip
>> >> > for
>> >> > symbian. i am trying this for several days but i can get it working
>> >> > for
>> >> > me.
>> >> >
>> >> > Help from anyone would be great appretiable.
>> >> >
>> >> > Thanks
>> >> >
>> >> > On Mon, Nov 3, 2008 at 3:17 PM, Rawshan Iajdani <iajdani at provati.com>
>> >> > wrote:
>> >> >>
>> >> >> You should be able to do that in pjlib/include/pj/config_site.h and
>> >> >> pjmedia/include/pjmedia-codec/config.h file. But always remember
>> >> >> config_site.h settings will overwrite any settings done in config.h
>> >> >> file.
>> >> >> Good luck?
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> From: pjsip-bounces@xxxxxxxxxxxxxxx
>> >> >> [mailto:pjsip-bounces at lists.pjsip.org]
>> >> >> On Behalf Of S. M. Nazmul Hasan (Opu)
>> >> >> Sent: Saturday, November 01, 2008 6:01 PM
>> >> >> To: pjsip list
>> >> >> Subject: Re: g729 codec
>> >> >>
>> >> >>
>> >> >>
>> >> >> Thanks Lajdani. My jumped start is running well.
>> >> >>
>> >> >> I am using Brekeke sip server to check the active session. and i am
>> >> >> getting the using codec (payload) is always PCMU/8000. even after
>> >> >> changing
>> >> >> the g729 for highest priority.
>> >> >>
>> >> >> pj_str_t codec_id = pj_str("g729");
>> >> >> pjmedia_codec_mgr_set_codec_priority(
>> >> >> pjmedia_endpt_get_codec_mgr(pjsua_var.med_endpt),
>> >> >> &codec_id, PJMEDIA_CODEC_PRIO_HIGHEST);
>> >> >>
>> >> >> when i changed it to PJMEDIA_CODEC_PRIO_LOWEST the result was same.
>> >> >> even
>> >> >> after disabling all the codecs and after deleting all g711 files and
>> >> >> related
>> >> >> fields it showed the payload is PCMU/8000.
>> >> >>
>> >> >> How can i easily disable all the codecs except g729.
>> >> >>
>> >> >> Thanks
>> >> >>
>> >> >>
>> >> >>
>> >> >> On Thu, Oct 30, 2008 at 3:43 AM, Rawshan Iajdani
>> >> >> <iajdani at provati.com>
>> >> >> wrote:
>> >> >>
>> >> >> Well.. your attribute settings seems fine. For the 33 it will be 20.
>> >> >> And
>> >> >> in place of 320, it will be 160.. hope this will give u a jump
>> >> >> start..
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> Rawshan Iajdani
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> From: pjsip-bounces@xxxxxxxxxxxxxxx
>> >> >> [mailto:pjsip-bounces at lists.pjsip.org]
>> >> >> On Behalf Of S. M. Nazmul Hasan (Opu)
>> >> >> Sent: Wednesday, October 29, 2008 6:12 PM
>> >> >> To: pjsip list
>> >> >> Subject: g729 codec
>> >> >>
>> >> >>
>> >> >>
>> >> >> Hi Benny,
>> >> >>
>> >> >> I am trying to add voice-age g729 codec with PJSIP for symbian. but
>> >> >> i
>> >> >> am
>> >> >> getting some difficulties while following the gsm.c file.
>> >> >>
>> >> >> 1. while creating g729 codec private data
>> >> >> what should i declare in replace of
>> >> >> // struct gsm_state *encoder;
>> >> >> // struct gsm_state *decoder;
>> >> >>
>> >> >> in "l16.c" its only use the frame size ..
>> >> >>
>> >> >> 2. in Generate default attribute.
>> >> >>
>> >> >> i have changed the value to this. is it ok?
>> >> >> attr->info.clock_rate = 8000;
>> >> >> attr->info.channel_cnt = 1;
>> >> >> attr->info.avg_bps = 8000;
>> >> >> attr->info.max_bps = 8000;
>> >> >> attr->info.pcm_bits_per_sample = 16;
>> >> >> attr->info.frm_ptime = 10;
>> >> >>
>> >> >> 3. In gsm.c there is some hard coding in gsm_codec_parse(
>> >> >> -- what will be the value in replace of "33" here
>> >> >>
>> >> >> 4. frame_size and sample_per_frame are also not clear to me..
>> >> >>
>> >> >> Sorry for lot of questions and may be those are lot easier to ask..
>> >> >> but
>> >> >> really i am not good in codec..
>> >> >>
>> >> >> waiting for reply.
>> >> >>
>> >> >> Thanks
>> >> >>
>> >> >> S. M. Nazmul Hasan Opu
>> >> >> Software Engineer
>> >> >> R & D Application
>> >> >> Dhaka, Bangladesh
>> >> >> Mob: +880 1712 901 764
>> >> >>
>> >> >> _______________________________________________
>> >> >> Visit our blog: http://blog.pjsip.org
>> >> >>
>> >> >> pjsip mailing list
>> >> >> pjsip at lists.pjsip.org
>> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >> >>
>> >> >>
>> >> >> --
>> >> >> S. M. Nazmul Hasan Opu
>> >> >> Software Engineer
>> >> >> R & D Application
>> >> >> Dhaka, Bangladesh
>> >> >> Mob: +880 1712 901 764
>> >> >>
>> >> >> _______________________________________________
>> >> >> Visit our blog: http://blog.pjsip.org
>> >> >>
>> >> >> pjsip mailing list
>> >> >> pjsip at lists.pjsip.org
>> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > S. M. Nazmul Hasan Opu
>> >> > Software Engineer
>> >> > R & D Application
>> >> > Dhaka, Bangladesh
>> >> > Mob: +880 1712 901 764
>> >> >
>> >> > _______________________________________________
>> >> > Visit our blog: http://blog.pjsip.org
>> >> >
>> >> > pjsip mailing list
>> >> > pjsip at lists.pjsip.org
>> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >> >
>> >> >
>> >>
>> >> _______________________________________________
>> >> Visit our blog: http://blog.pjsip.org
>> >>
>> >> pjsip mailing list
>> >> pjsip at lists.pjsip.org
>> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >
>> >
>> >
>> > --
>> > S. M. Nazmul Hasan Opu
>> > Software Engineer
>> > R & D Application
>> > Dhaka, Bangladesh
>> > Mob: +880 1712 901 764
>> >
>> > _______________________________________________
>> > Visit our blog: http://blog.pjsip.org
>> >
>> > pjsip mailing list
>> > pjsip at lists.pjsip.org
>> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >
>> >
>>
>> _______________________________________________
>> Visit our blog: http://blog.pjsip.org
>>
>> pjsip mailing list
>> pjsip at lists.pjsip.org
>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
>
> --
> S. M. Nazmul Hasan Opu
> Software Engineer
> R & D Application
> Dhaka, Bangladesh
> Mob: +880 1712 901 764
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
