It seems the g729_enum_codecs() is well defined. So please make sure
that pjmedia_codec_g729_init() is called, e.g: set
PJMEDIA_HAS_G729_CODEC to 1 in your config_site.h.
Regards,
nanang
On Sun, Nov 9, 2008 at 2:11 PM, S. M. Nazmul Hasan (Opu)
<apus29 at gmail.com> wrote:
> Hi Nanang,
>
> I have tested it to make a self call and getting 488(Not acceptable here)
> response. i saw
> the log file and the sdp , there speex, gsm , pcma and pcmu only presents .
> and no g729.
> so it looks like that g729 is not registered. and server rejected the call.
>
> I have checked the log file of server , there was a message:
>
> No compatible codecs, not accepting this offer!
>
> please give me a suggestion.
>
> Thanks
>
> opu
>
> On Thu, Nov 6, 2008 at 4:26 PM, Nanang Izzuddin <nanang at pjsip.org> wrote:
>>
>> Hi,
>>
>> I think it would be better if you see the log file in the rejecting
>> side (it can be the proxy/asterisk or x-lite) to see why it rejected
>> the call. If you have pjsua with IPP enabled, you can just make a call
>> to the pjsua and send along the pjsua log file.
>>
>> The log file in the Symbian side may help, but I am not sure it will
>> help a lot, however to generate the log file on Symbian, just specify
>> log filename in logging config for the pjsua_init(), e.g:
>> log_cfg.log_filename = pj_str("c:\\data\\pjsua.log");
>>
>> Regards,
>> nanang
>>
>>
>> On Thu, Nov 6, 2008 at 3:02 PM, S. M. Nazmul Hasan (Opu)
>> <apus29 at gmail.com> wrote:
>> > Hi Nanag,
>> >
>> > Yes the other endpoint supports g729. my tested environment was:
>> >
>> > server: AsteriskNow (which supports g729)
>> > client: pjsip (symbian_ua_gui) and Xlite Pro(which supports g729)
>> >
>> > 1. when i am using both endpoint as Xlite pro and fixing the codec as
>> > g729
>> > only then both using g729 and call established fine.
>> >
>> > 2. But when i am trying with symbian_ua_gui with Xlite Pro fixing the
>> > codec
>> > to g729 then i am getting 488(Not acceptable here) response.
>> >
>> > Can you please tell me how can I get the log file for No. 2 test
>> > criteria.
>> >
>> > Thanks
>> >
>> > Opu
>> >
>> > On Wed, Nov 5, 2008 at 5:00 PM, Nanang Izzuddin <nanang at pjsip.org>
>> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> Just in case, please make sure the other endpoint supports G729 too,
>> >> e.g: make a call to PJSUA on desktop with IPP G729 enabled. And please
>> >> check the pjsua log, see if G729 is in the INVITE SDP. If it is
>> >> rejected, you may see the reason in the pjsua log.
>> >>
>> >> Regards,
>> >> nanang
>> >>
>> >>
>> >> On Wed, Nov 5, 2008 at 1:39 PM, S. M. Nazmul Hasan (Opu)
>> >> <apus29 at gmail.com> wrote:
>> >> > Nanag,
>> >> >
>> >> > I think so Nanang, may be its not registering because i am getting
>> >> > response
>> >> > 488(Not acceptable here). But i did it register and unregister in
>> >> > pjsua_media.c.
>> >> >
>> >> > Can you please see these files.
>> >> >
>> >> > Thanks
>> >> >
>> >> > Opu
>> >> >
>> >> > On Tue, Nov 4, 2008 at 10:18 PM, Nanang Izzuddin <nanang at pjsip.org>
>> >> > wrote:
>> >> >>
>> >> >> Hi,
>> >> >>
>> >> >> Just did a quick skimming, things I can found so far:
>> >> >> 1. For 8000kbps and 10ms frame time, the encoded frame size should
>> >> >> be
>> >> >> 10 bytes, not 20 bytes.
>> >> >> 2. this line:
>> >> >> pcm_in += 160;
>> >> >> should be:
>> >> >> pcm_in += 80;
>> >> >>
>> >> >> Numbers in a codec wrapper are very important, so please check and
>> >> >> recheck carefully.
>> >> >>
>> >> >> Regards,
>> >> >> nanang
>> >> >>
>> >> >>
>> >> >> On Tue, Nov 4, 2008 at 8:42 PM, S. M. Nazmul Hasan (Opu)
>> >> >> <apus29 at gmail.com> wrote:
>> >> >> > Dear Rawshan,
>> >> >> >
>> >> >> > Can you please check the file if it is ok to add voiceage g729 in
>> >> >> > pjsip
>> >> >> > for
>> >> >> > symbian. i am trying this for several days but i can get it
>> >> >> > working
>> >> >> > for
>> >> >> > me.
>> >> >> >
>> >> >> > Help from anyone would be great appretiable.
>> >> >> >
>> >> >> > Thanks
>> >> >> >
>> >> >> > On Mon, Nov 3, 2008 at 3:17 PM, Rawshan Iajdani
>> >> >> > <iajdani at provati.com>
>> >> >> > wrote:
>> >> >> >>
>> >> >> >> You should be able to do that in pjlib/include/pj/config_site.h
>> >> >> >> and
>> >> >> >> pjmedia/include/pjmedia-codec/config.h file. But always remember
>> >> >> >> config_site.h settings will overwrite any settings done in
>> >> >> >> config.h
>> >> >> >> file.
>> >> >> >> Good luck?
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> From: pjsip-bounces@xxxxxxxxxxxxxxx
>> >> >> >> [mailto:pjsip-bounces at lists.pjsip.org]
>> >> >> >> On Behalf Of S. M. Nazmul Hasan (Opu)
>> >> >> >> Sent: Saturday, November 01, 2008 6:01 PM
>> >> >> >> To: pjsip list
>> >> >> >> Subject: Re: g729 codec
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> Thanks Lajdani. My jumped start is running well.
>> >> >> >>
>> >> >> >> I am using Brekeke sip server to check the active session. and i
>> >> >> >> am
>> >> >> >> getting the using codec (payload) is always PCMU/8000. even
>> >> >> >> after
>> >> >> >> changing
>> >> >> >> the g729 for highest priority.
>> >> >> >>
>> >> >> >> pj_str_t codec_id = pj_str("g729");
>> >> >> >> pjmedia_codec_mgr_set_codec_priority(
>> >> >> >> pjmedia_endpt_get_codec_mgr(pjsua_var.med_endpt),
>> >> >> >> &codec_id, PJMEDIA_CODEC_PRIO_HIGHEST);
>> >> >> >>
>> >> >> >> when i changed it to PJMEDIA_CODEC_PRIO_LOWEST the result was
>> >> >> >> same.
>> >> >> >> even
>> >> >> >> after disabling all the codecs and after deleting all g711 files
>> >> >> >> and
>> >> >> >> related
>> >> >> >> fields it showed the payload is PCMU/8000.
>> >> >> >>
>> >> >> >> How can i easily disable all the codecs except g729.
>> >> >> >>
>> >> >> >> Thanks
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> On Thu, Oct 30, 2008 at 3:43 AM, Rawshan Iajdani
>> >> >> >> <iajdani at provati.com>
>> >> >> >> wrote:
>> >> >> >>
>> >> >> >> Well.. your attribute settings seems fine. For the 33 it will be
>> >> >> >> 20.
>> >> >> >> And
>> >> >> >> in place of 320, it will be 160.. hope this will give u a jump
>> >> >> >> start..
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> Rawshan Iajdani
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> From: pjsip-bounces@xxxxxxxxxxxxxxx
>> >> >> >> [mailto:pjsip-bounces at lists.pjsip.org]
>> >> >> >> On Behalf Of S. M. Nazmul Hasan (Opu)
>> >> >> >> Sent: Wednesday, October 29, 2008 6:12 PM
>> >> >> >> To: pjsip list
>> >> >> >> Subject: g729 codec
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> Hi Benny,
>> >> >> >>
>> >> >> >> I am trying to add voice-age g729 codec with PJSIP for symbian.
>> >> >> >> but
>> >> >> >> i
>> >> >> >> am
>> >> >> >> getting some difficulties while following the gsm.c file.
>> >> >> >>
>> >> >> >> 1. while creating g729 codec private data
>> >> >> >> what should i declare in replace of
>> >> >> >> // struct gsm_state *encoder;
>> >> >> >> // struct gsm_state *decoder;
>> >> >> >>
>> >> >> >> in "l16.c" its only use the frame size ..
>> >> >> >>
>> >> >> >> 2. in Generate default attribute.
>> >> >> >>
>> >> >> >> i have changed the value to this. is it ok?
>> >> >> >> attr->info.clock_rate = 8000;
>> >> >> >> attr->info.channel_cnt = 1;
>> >> >> >> attr->info.avg_bps = 8000;
>> >> >> >> attr->info.max_bps = 8000;
>> >> >> >> attr->info.pcm_bits_per_sample = 16;
>> >> >> >> attr->info.frm_ptime = 10;
>> >> >> >>
>> >> >> >> 3. In gsm.c there is some hard coding in gsm_codec_parse(
>> >> >> >> -- what will be the value in replace of "33" here
>> >> >> >>
>> >> >> >> 4. frame_size and sample_per_frame are also not clear to me..
>> >> >> >>
>> >> >> >> Sorry for lot of questions and may be those are lot easier to
>> >> >> >> ask..
>> >> >> >> but
>> >> >> >> really i am not good in codec..
>> >> >> >>
>> >> >> >> waiting for reply.
>> >> >> >>
>> >> >> >> Thanks
>> >> >> >>
>> >> >> >> S. M. Nazmul Hasan Opu
>> >> >> >> Software Engineer
>> >> >> >> R & D Application
>> >> >> >> Dhaka, Bangladesh
>> >> >> >> Mob: +880 1712 901 764
>> >> >> >>
>> >> >> >> _______________________________________________
>> >> >> >> Visit our blog: http://blog.pjsip.org
>> >> >> >>
>> >> >> >> pjsip mailing list
>> >> >> >> pjsip at lists.pjsip.org
>> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >> >> >>
>> >> >> >>
>> >> >> >> --
>> >> >> >> S. M. Nazmul Hasan Opu
>> >> >> >> Software Engineer
>> >> >> >> R & D Application
>> >> >> >> Dhaka, Bangladesh
>> >> >> >> Mob: +880 1712 901 764
>> >> >> >>
>> >> >> >> _______________________________________________
>> >> >> >> Visit our blog: http://blog.pjsip.org
>> >> >> >>
>> >> >> >> pjsip mailing list
>> >> >> >> pjsip at lists.pjsip.org
>> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> > S. M. Nazmul Hasan Opu
>> >> >> > Software Engineer
>> >> >> > R & D Application
>> >> >> > Dhaka, Bangladesh
>> >> >> > Mob: +880 1712 901 764
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > Visit our blog: http://blog.pjsip.org
>> >> >> >
>> >> >> > pjsip mailing list
>> >> >> > pjsip at lists.pjsip.org
>> >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >> >> >
>> >> >> >
>> >> >>
>> >> >> _______________________________________________
>> >> >> Visit our blog: http://blog.pjsip.org
>> >> >>
>> >> >> pjsip mailing list
>> >> >> pjsip at lists.pjsip.org
>> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > S. M. Nazmul Hasan Opu
>> >> > Software Engineer
>> >> > R & D Application
>> >> > Dhaka, Bangladesh
>> >> > Mob: +880 1712 901 764
>> >> >
>> >> > _______________________________________________
>> >> > Visit our blog: http://blog.pjsip.org
>> >> >
>> >> > pjsip mailing list
>> >> > pjsip at lists.pjsip.org
>> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >> >
>> >> >
>> >>
>> >> _______________________________________________
>> >> Visit our blog: http://blog.pjsip.org
>> >>
>> >> pjsip mailing list
>> >> pjsip at lists.pjsip.org
>> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >
>> >
>> >
>> > --
>> > S. M. Nazmul Hasan Opu
>> > Software Engineer
>> > R & D Application
>> > Dhaka, Bangladesh
>> > Mob: +880 1712 901 764
>> >
>> > _______________________________________________
>> > Visit our blog: http://blog.pjsip.org
>> >
>> > pjsip mailing list
>> > pjsip at lists.pjsip.org
>> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>> >
>> >
>>
>> _______________________________________________
>> Visit our blog: http://blog.pjsip.org
>>
>> pjsip mailing list
>> pjsip at lists.pjsip.org
>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
>
> --
> S. M. Nazmul Hasan Opu
> Software Engineer
> R & D Application
> Dhaka, Bangladesh
> Mob: +880 1712 901 764
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
