Linux Tip Commits - Date Index

• Thread Index

• [tip: x86/misc] x86/pmem: Fix platform-device leak in error path
  • From: "tip-bot2 for Johan Hovold" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/tdx] x86/build: remove unused OBJECT_FILES_NON_STANDARD_test_nx.o
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [tip: x86/urgent] x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/tdx: Clarify RIP adjustments in #VE handler
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/tdx: Fix early #VE handling
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] x86/fpu: Add a helper to prepare AMX state for low-power CPU idle
  • From: "tip-bot2 for Chang S. Bae" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] intel_idle: Add a new flag to initialize the AMX state
  • From: "tip-bot2 for Chang S. Bae" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] x86/fpu: Add a helper to prepare AMX state for low-power CPU idle
  • From: "tip-bot2 for Chang S. Bae" <tip-bot2@xxxxxxxxxxxxx>
• [PATCH][Rebased] intel_idle: Add a new flag to initialize the AMX state
  • From: "Chang S. Bae" <chang.seok.bae@xxxxxxxxx>
• [tip: irq/core] genirq/PM: Unexport {suspend,resume}_device_irqs()
  • From: "tip-bot2 for Lukas Wunner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched: Fix the check of nr_running at queue wakelist
  • From: "tip-bot2 for Tianchen Ding" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle
  • From: "tip-bot2 for Tianchen Ding" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/numa: Initialise numa_migrate_retry
  • From: "tip-bot2 for Mel Gorman" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/numa: Do not swap tasks between nodes when spare capacity is available
  • From: "tip-bot2 for Mel Gorman" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/numa: Adjust imb_numa_nr to a better approximation of memory channels
  • From: "tip-bot2 for Mel Gorman" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Consider CPU affinity when allowing NUMA imbalance in find_idlest_group()
  • From: "tip-bot2 for K Prateek Nayak" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/numa: Apply imbalance limitations consistently
  • From: "tip-bot2 for Mel Gorman" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Optimize and simplify rq leaf_cfs_rq_list
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/deadline: Use proc_douintvec_minmax() limit minimum value
  • From: "tip-bot2 for Yajun Deng" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched: Allow newidle balancing to bail out of load_balance
  • From: "tip-bot2 for Josh Don" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] locking/lockdep: Use sched_clock() for random numbers
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched: Fix balance_push() vs __sched_setscheduler()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] x86/events/intel/ds: Enable large PEBS for PERF_SAMPLE_WEIGHT_TYPE
  • From: "tip-bot2 for Like Xu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/uncore: Use attr_update for format attributes
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/uncore: Use dynamic events array
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/uncore: Detect available DF counters
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/uncore: Add PerfMonV2 DF event format
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/uncore: Add PerfMonV2 RDPMC assignments
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/mm: Fix RESERVE_BRK() for older binutils
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/urgent] Merge tag 'irqchip-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Fix obsolete reference to CONFIG_X86_SMAP
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] faddr2line: Fix overlapping text section failures, the sequel
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/fpu] intel_idle: Add a new flag to initialize the AMX state
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86: Remove vendor checks from prefer_mwait_c1_over_halt
  • From: "tip-bot2 for Wyes Karny" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86: Handle idle=nomwait cmdline properly for x86_idle
  • From: "tip-bot2 for Wyes Karny" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86: Fix comment for X86_FEATURE_ZEN
  • From: "tip-bot2 for Wyes Karny" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] x86/fpu: Add a helper to prepare AMX state for low-power CPU idle
  • From: "tip-bot2 for Chang S. Bae" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] intel_idle: Add a new flag to initialize the AMX state
  • From: "tip-bot2 for Chang S. Bae" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mm] Documentation/protection-keys: Clean up documentation for User Space pkeys
  • From: "tip-bot2 for Ira Weiny" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mm] x86/pkeys: Clarify PKRU_AD_KEY macro
  • From: "tip-bot2 for Ira Weiny" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mm] x86/mm/tlb: Avoid reading mm_tlb_gen when possible
  • From: "tip-bot2 for Nadav Amit" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/sgx: Set active memcg prior to shmem allocation
  • From: "tip-bot2 for Kristen Carlson Accardi" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/microcode] x86/microcode: Taint and warn on late loading
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/microcode] x86/microcode: Rip out the OLD_INTERFACE
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/microcode] x86/microcode: Default-disable late loading
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/microcode] x86/microcode: Remove unnecessary perf callback
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/autogroup: Fix sysctl move
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] x86: Always inline on_thread_stack() and current_top_of_stack()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] x86/cpu: Elide KCSAN for cpu_has() and friends
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] context_tracking: Always inline empty stubs
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] x86/extable: Annotate ex_handler_msr_mce() as a dead end
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mm] x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
  • From: "tip-bot2 for Fanjun Kong" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86: Fix all occurences of the "the the" typo
  • From: "tip-bot2 for Bo Liu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Remove unused local variable
  • From: "tip-bot2 for Haowen Bai" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86: Fix all occurences of the "the the" typo
  • From: "tip-bot2 for Bo Liu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] Merge tag 'timers-v5.19-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: "tip-bot2 for Allen-KH Cheng" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/ixp4xx: Drop boardfile probe path
  • From: "tip-bot2 for Linus Walleij" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/riscv: Events are stopped during CPU suspend
  • From: "tip-bot2 for Samuel Holland" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/sp804: Avoid error on multiple instances
  • From: "tip-bot2 for Andre Przywara" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/bcm_kona: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/jcore: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/armada-370-xp: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/orion: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/digicolor: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/lpc32xx: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/pistachio: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-sun4i: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
  • From: "tip-bot2 for Dan Carpenter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-sun5i: Convert to SPDX identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
  • From: "tip-bot2 for Krzysztof Kozlowski" <tip-bot2@xxxxxxxxxxxxx>
• Re: [PATCH V2] x86/idt: traceponit.c: fix comment for irq vector tracepoints
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH V2] x86/idt: traceponit.c: fix comment for irq vector tracepoints
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• [PATCH V2] x86/idt: traceponit.c: fix comment for irq vector tracepoints
  • From: sunliming <sunliming@xxxxxxxxxx>
• [PATCH V2] x86/idt: traceponit.c: fix comment for irq vector tracepoints
  • From: sunliming <sunliming@xxxxxxxxxx>
• [tip: perf/urgent] perf/x86/intel: Fix event constraints for ICL
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/Kconfig: Fix indentation in the Kconfig file
  • From: "tip-bot2 for Juerg Haefliger" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/idt: Remove unused headers
  • From: "tip-bot2 for sunliming" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
  • From: "tip-bot2 for Juerg Haefliger" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
  • From: "tip-bot2 for Juerg Haefliger" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/boot] x86/setup: Use strscpy() to replace deprecated strlcpy()
  • From: "tip-bot2 for XueBing Chen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] Merge tag 'irqchip-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• Re: [PATCH] x86/tdx: Fix tdx asm
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• Re: [tip: sched/core] topology: Remove unused cpu_cluster_mask()
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [tip: sched/core] topology: Remove unused cpu_cluster_mask()
  • From: Barry Song <baohua@xxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Fix RETs in TDX asm
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Fix symbol creation
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Fix objtool regression on x32 systems
  • From: "tip-bot2 for Mikulas Patocka" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/entry: Fixup objtool/ibt validation
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86: Remove empty files
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/microcode] x86/microcode: Add explicit CPU vendor dependency
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [PATCH] x86/tdx: Fix tdx asm
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Fix objtool regression on x32 systems
  • From: "tip-bot2 for Mikulas Patocka" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] bug: Use normal relative pointers in 'struct bug_entry'
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Fix register corruption in compat syscall
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Fix symbol creation
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched: Reverse sched_class layout
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] topology: Remove unused cpu_cluster_mask()
  • From: "tip-bot2 for Dietmar Eggemann" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Fix reloading events for SVM
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] sched/clock: Use try_cmpxchg64 in sched_clock_{local,remote}
  • From: "tip-bot2 for Uros Bizjak" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/boot: Wrap literal addresses in absolute_pointer()
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Mark the code returning to user space as syscall gap
  • From: "tip-bot2 for Lai Jiangshan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Annotate stack change in the #VC handler
  • From: "tip-bot2 for Lai Jiangshan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Remove libsubcmd.a when make clean
  • From: "tip-bot2 for Tiezhu Yang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Remove inat-tables.c when make clean
  • From: "tip-bot2 for Tiezhu Yang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] scripts: Create objdump-func helper script
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] scripts/faddr2line: Fix overlapping text section failures
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/atomic: Add generic try_cmpxchg64 support
  • From: "tip-bot2 for Uros Bizjak" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/atomic/x86: Introduce arch_try_cmpxchg64
  • From: "tip-bot2 for Uros Bizjak" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Run AMD BRS code only on supported hw
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Fix AMD BRS period adjustment
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sgx] x86/sgx: Mark PCMD page as dirty when modifying contents
  • From: "tip-bot2 for Reinette Chatre" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sgx] x86/sgx: Fix race between reclaimer and page fault handler
  • From: "tip-bot2 for Reinette Chatre" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sgx] x86/sgx: Obtain backing storage page with enclave mutex held
  • From: "tip-bot2 for Reinette Chatre" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sgx] x86/sgx: Ensure no data in PCMD page after truncate
  • From: "tip-bot2 for Reinette Chatre" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sgx] x86/sgx: Disconnect backing page references from dirty status
  • From: "tip-bot2 for Reinette Chatre" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Remove duplicated assignment to variable info
  • From: "tip-bot2 for Colin Ian King" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/nmi: Make register_nmi_handler() more robust
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] genirq/irq_sim: Make the irq_work always run in hard irq context
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timers: Provide a better debugobjects hint for delayed works
  • From: "tip-bot2 for Stephen Boyd" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/speculation: Add missing srbds=off to the mitigations= help text
  • From: "tip-bot2 for Xiao Yang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/prctl: Remove pointless task argument
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/mm: Fix marking of unused sub-pmd ranges
  • From: "tip-bot2 for Adrian-Ken Rueegsegger" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Remove a PREEMPT_RT_FULL reference.
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/debugobjects] debugobjects: Convert to SPDX license identifier
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Remove unused variable 'hwc'
  • From: "tip-bot2 for Zucheng Zheng" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/tracing: Append prev_state to tp args instead
  • From: "tip-bot2 for Delyan Kratunov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/vdso] x86/vsyscall: Remove CONFIG_LEGACY_VSYSCALL_EMULATE
  • From: "tip-bot2 for Andy Lutomirski" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/core: Avoid obvious double update_rq_clock warning
  • From: "tip-bot2 for Hao Jia" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/deadline: Remove superfluous rq clock update in push_dl_task()
  • From: "tip-bot2 for Hao Jia" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86: Add new Alder Lake and Raptor Lake support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/cstate: Add new Alder Lake and Raptor Lake support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/msr: Add new Alder Lake and Raptor Lake support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/uncore: Clean up uncore_pci_ids[]
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/uncore: Add new Alder Lake and Raptor Lake support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/amd/ibs: Use ->is_visible callback for dynamic attributes
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/amd/ibs: Add support for L3 miss filtering
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/amd/ibs: Cascade pmu init functions' return value
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/ibs: Fix comment
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/amd/ibs: Advertise zen4_ibs_extensions as pmu capability attribute
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Remove unused variable 'hwc'
  • From: "tip-bot2 for Zucheng Zheng" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/qrwlock: Change "queue rwlock" to "queued rwlock"
  • From: "tip-bot2 for Waiman Long" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] lockdep: Delete local_irq_enable_in_hardirq()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/urgent] genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
  • From: "tip-bot2 for Lukas Wunner" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: perf/core] kvm: x86/cpuid: Fix CPUID leaf 0xA
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [tip: perf/core] perf/amd/ibs: Use interrupt regs ip for stack unwinding
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: perf/core] kvm: x86/cpuid: Fix CPUID leaf 0xA
  • From: Sandipan Das <sandipan.das@xxxxxxx>
• Re: [tip: perf/core] kvm: x86/cpuid: Fix CPUID leaf 0xA
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [tip: x86/asm] objtool: Fix STACK_FRAME_NON_STANDARD reloc type
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/mm: Simplify RESERVE_BRK()
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Use PUSH_AND_CLEAR_REGS for compat
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Remove skip_r11rcx
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] linkage: Fix issue with missing symbol size
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] objtool: Fix STACK_FRAME_NON_STANDARD reloc type
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Simplify entry_INT80_compat()
  • From: "tip-bot2 for Linus Torvalds" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/urgent] genirq: Synchronize interrupt thread startup
  • From: "tip-bot2 for Thomas Pfaff" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu: Prevent FPU state corruption
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] MAINTAINERS: Update Josh Poimboeuf's email address
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/misc] x86/mm: Cleanup the control_va_addr_alignment() __setup handler
  • From: "tip-bot2 for Randy Dunlap" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/misc] x86: Fix return value of __setup handlers
  • From: "tip-bot2 for Randy Dunlap" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/splitlock] x86/split_lock: Enable the split lock feature on Raptor Lake
  • From: "tip-bot2 for Tony Luck" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] x86/cpufeatures: Add PerfMonV2 feature bit
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Detect PerfMonV2 support
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] x86/msr: Add PerfCntrGlobal* registers
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Add PerfMonV2 counter control
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/amd/ibs: Use interrupt regs ip for stack unwinding
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Detect available counters
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Add PerfMonV2 overflow handling
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] kvm: x86/cpuid: Fix CPUID leaf 0xA
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Convert SWAPGS to swapgs and remove the definition of SWAPGS
  • From: "tip-bot2 for Lai Jiangshan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/traps: Use pt_regs directly in fixup_bad_iret()
  • From: "tip-bot2 for Lai Jiangshan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Move CLD to the start of the idtentry macro
  • From: "tip-bot2 for Lai Jiangshan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()
  • From: "tip-bot2 for Lai Jiangshan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Switch the stack after error_entry() returns
  • From: "tip-bot2 for Lai Jiangshan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry: Don't call error_entry() for XENPV
  • From: "tip-bot2 for Lai Jiangshan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/urgent] genirq: Synchronize interrupt thread startup
  • From: "tip-bot2 for Thomas Pfaff" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Fix address space sparse warning
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] time/sched_clock: Round the frequency reported to nearest rather than down
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] time/sched_clock: Use Hz as the unit for clock rate reporting below 4kHz
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] time/sched_clock: Fix formatting of frequency reporting code
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] genirq: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
  • From: "tip-bot2 for Minghao Chi" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timekeeping: Annotate ktime_get_boot_fast_ns() with data_race()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timekeeping: Consolidate fast timekeeper
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] x86/fpu: Cleanup variable shadowing
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfperf: Make it correct on 32bit and UP kernels
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/apic] x86/apic: Do apic driver probe for "nosmp" use case
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/urgent] mm: Fix PASID use-after-free issue
  • From: "tip-bot2 for Fenghua Yu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched: Fix missing prototype warnings
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] smp: Rename flush_smp_call_function_from_idle()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] smp: Make softirq handling RT safe in flush_smp_call_function_queue()
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Remove sched_trace_*() helper functions
  • From: "tip-bot2 for Dietmar Eggemann" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Remove cfs_rq_tg_path()
  • From: "tip-bot2 for Dietmar Eggemann" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Refactor cpu_util_without()
  • From: "tip-bot2 for Dietmar Eggemann" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] x86/cpufeatures: Add PerfMonV2 feature bit
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Add PerfMonV2 overflow handling
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] x86/msr: Add PerfCntrGlobal* registers
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] kvm: x86/cpuid: Fix CPUID leaf 0xA
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Detect PerfMonV2 support
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Add PerfMonV2 counter control
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/amd/ibs: Use interrupt regs ip for stack unwinding
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd/core: Detect available counters
  • From: "tip-bot2 for Sandipan Das" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] timekeeping: Mark NMI safe time accessors as notrace
  • From: "tip-bot2 for Kurt Kanzenbach" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/speculation: Add missing prototype for unpriv_ebpf_notify()
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Make parts of the frequency invariance code unconditional
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Integrate the fallback code from show_cpuinfo()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Replace arch_freq_get_on_cpu()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Untangle Intel and AMD frequency invariance init
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Replace aperfmperf_get_khz()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Restructure arch_scale_freq_tick()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Store aperf/mperf data for cpu frequency reads
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/urgent] bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()
  • From: "tip-bot2 for Shin'ichiro Kawasaki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Replace aperfmperf_get_khz()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Make parts of the frequency invariance code unconditional
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Store aperf/mperf data for cpu frequency reads
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Replace arch_freq_get_on_cpu()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/smp: Move APERF/MPERF code where it belongs
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Separate AP/BP frequency invariance init
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Integrate the fallback code from show_cpuinfo()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Untangle Intel and AMD frequency invariance init
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Restructure arch_scale_freq_tick()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/splitlock] x86/split_lock: Make life miserable for split lockers
  • From: "tip-bot2 for Tony Luck" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/splitlock] x86/split-lock: Remove unused TIF_SLD bit
  • From: "tip-bot2 for Tony Luck" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/pm: Fix false positive kmemleak report in msr_build_context()
  • From: "tip-bot2 for Matthieu Baerts" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Get the AP jump table address from secrets page
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Add missing __init annotations to SEV init routines
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: sevguest: Rename the sevguest dir and files to sev-guest
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] bug: Have __warn() prototype defined unconditionally
  • From: "tip-bot2 for Shida Zhang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: ras/core] x86/mce: Add messages for panic errors in AMD's MCE grading
  • From: "tip-bot2 for Carlos Bilbao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: ras/core] x86/mce: Simplify AMD severity grading logic
  • From: "tip-bot2 for Carlos Bilbao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] x86/fpu/xsave: Support XSAVEC in the kernel
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] genirq/matrix: Remove redundant assignment to variable 'end'
  • From: "tip-bot2 for Colin Ian King" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timers/nohz: Switch to ONESHOT_STOPPED in the low-res handler when the tick is stopped
  • From: "tip-bot2 for Nicholas Piggin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] libsubcmd: Fix OPTION_GROUP sorting
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Add CONFIG_OBJTOOL
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Reorganize cmdline options
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Remove --lto and --vmlinux in favor of --link
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Update documentation
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Make stack validation optional
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Make jump label hack optional
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Make static call annotation optional
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Rework ibt and extricate from stack validation
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Add option to print section addresses
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Make stack validation frame-pointer-specific
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Make noinstr hacks optional
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Add HAVE_NOINSTR_VALIDATION
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Don't print parentheses in function addresses
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Ditch subcommands
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/core] objtool: Extricate sls from stack validation
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Fix type of reloc::addend
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Fix code relocs vs weak symbols
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] psi: Fix trigger being fired unexpectedly at initial
  • From: "tip-bot2 for Hailong Liu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] mailmap: Update my email address to @redhat.com
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Delete useless condition in tg_unthrottle_up()
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/psi: report zeroes for CPU full at the system level
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Move calculate of avg_load to a better location
  • From: "tip-bot2 for zgpeng" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] MAINTAINERS: Add myself as scheduler topology reviewer
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Revise comment about lb decision matrix
  • From: "tip-bot2 for Tao Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] signal: Deliver SIGTRAP on perf event asynchronously if blocked
  • From: "tip-bot2 for Marco Elver" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] MAINTAINERS: Update email address for John Stultz
  • From: "tip-bot2 for John Stultz" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] futex: MAINTAINERS, .mailmap: Update André's email address
  • From: tip-bot2 for André Almeida <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: sevguest: Rename the sevguest dir and files to sev-guest
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Annotate a noreturn function
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: sevguest: Change driver name to reflect generic SEV support
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/boot: Put globals that are accessed early into the .data section
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/unwind/orc: Recheck address range after stack info was updated
  • From: "tip-bot2 for Dmitry Monakhov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] objtool: Print data address for "!ENDBR" data warnings
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] lib/strn*,objtool: Enforce user_access_begin() rules
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] MAINTAINERS: Add x86 unwinding entry
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] objtool: Use offstr() to print address of missing ENDBR
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86,objtool: Mark cpu_startup_entry() __noreturn
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/uaccess: Add ENDBR to __put_user_nocheck*()
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86,xen,objtool: Add UNWIND hint
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] objtool: Enable unreachable warnings for CLANG LTO
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
  • From: "tip-bot2 for Nur Hussein" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] x86/uaccess: Don't jump between functions
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Don't set 'jump_dest' for sibling calls
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Fix sibling call detection in alternatives
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: objtool/urgent] objtool: Fix function fallthrough detection for vmlinux
  • From: "tip-bot2 for Josh Poimboeuf" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/cpu: Load microcode during restore_processor_state()
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/pelt: Fix attach_entity_load_avg() corner case
  • From: "tip-bot2 for kuyo chang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU support
  • From: "tip-bot2 for Zhang Rui" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled
  • From: "tip-bot2 for Zhipeng Xie" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/mm: Fix spacing within memory encryption features message
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/mm: Fix spacing within memory encryption features message
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/build: remove unused OBJECT_FILES_NON_STANDARD_test_nx.o
  • From: "tip-bot2 for Masahiro Yamada" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
  • From: "tip-bot2 for Tony Luck" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/boot: Add an efi.h header for the decompressor
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/sev] virt: Add SEV-SNP guest driver
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/sev] virt: Add SEV-SNP guest driver
  • From: Tom Lendacky <thomas.lendacky@xxxxxxx>
• Re: [tip: x86/sev] virt: Add SEV-SNP guest driver
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/sev] virt: Add SEV-SNP guest driver
  • From: Dionna Amalie Glaze <dionnaglaze@xxxxxxxxxx>
• [tip: x86/core] x86/32: Simplify ELF_CORE_COPY_REGS
  • From: "tip-bot2 for Brian Gerst" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/32: Remove lazy GS macros
  • From: "tip-bot2 for Brian Gerst" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] ELF: Remove elf_core_copy_kernel_regs()
  • From: "tip-bot2 for Brian Gerst" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/asm: Merge load_gs_index()
  • From: "tip-bot2 for Brian Gerst" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timekeeping: Introduce fast accessor to clock tai
  • From: "tip-bot2 for Kurt Kanzenbach" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] tracing/timer: Add missing argument documentation of trace points
  • From: "tip-bot2 for Anna-Maria Behnsen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] genirq: Take the proposed affinity at face value if force==true
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: sevguest: Fix bool function returning negative value
  • From: "tip-bot2 for Haowen Bai" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/process: Fix kernel-doc warning due to a changed function name
  • From: "tip-bot2 for Jiapeng Chong" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/core] lib/irq_poll: Prevent softirq pending leak in irq_poll_cpu_dead()
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: smp/core] cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
  • From: "tip-bot2 for Steven Price" <tip-bot2@xxxxxxxxxxxxx>
• [tip: smp/core] cpu/hotplug: Initialise all cpuhp_cpu_state structs earlier
  • From: "tip-bot2 for Steven Price" <tip-bot2@xxxxxxxxxxxxx>
• [tip: smp/urgent] cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
  • From: "tip-bot2 for Steven Price" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/kdump] x86/crash: Fix minor typo/bug in debug message
  • From: "tip-bot2 for Eric DeVolder" <tip-bot2@xxxxxxxxxxxxx>
• [tip: smp/urgent] smp: Fix offline cpu check in flush_smp_call_function_queue()
  • From: "tip-bot2 for Nadav Amit" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/apic] x86/apic: Clarify i82489DX bit overlap in APIC_LVT0
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: smp/core] x86/xen: Allow to retry if cpu_initialize_context() failed.
  • From: "tip-bot2 for Boris Ostrovsky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: smp/core] cpu/hotplug: Allow the CPU in CPU_UP_PREPARE state to be brought up again.
  • From: "tip-bot2 for Longpeng(Mike)" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Qais Yousef <qais.yousef@xxxxxxx>
• [tip: x86/cleanups] x86: Remove a.out support
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: sevguest: Fix return value check in alloc_shared_pages()
  • From: "tip-bot2 for Yang Yingliang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
  • From: "tip-bot2 for Pawan Gupta" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/tsx: Disable TSX development mode at boot
  • From: "tip-bot2 for Pawan Gupta" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [tip: irq/urgent] genirq/affinity: Consider that CPUs on nodes can be unbalanced
  • From: "tip-bot2 for Rei Yamamoto" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Holger Hoffstätte <holger@xxxxxxxxxxxxxxxxxxxxxx>
• [tip: x86/tdx] x86/kaslr: Fix build warning in KASLR code in boot stub
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Holger Hoffstätte <holger@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Holger Hoffstätte <holger@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Qais Yousef <qais.yousef@xxxxxxx>
• Re: [tip: irq/core] genirq/affinity: Replace cpumask_weight() with cpumask_empty() where appropriate
  • From: Yury Norov <yury.norov@xxxxxxxxx>
• [tip: x86/cleanups] x86: Replace cpumask_weight() with cpumask_empty() where appropriate
  • From: "tip-bot2 for Yury Norov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/mm: Replace nodes_weight() with nodes_empty() where appropriate
  • From: "tip-bot2 for Yury Norov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource: Replace cpumask_weight() with cpumask_empty()
  • From: "tip-bot2 for Yury Norov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/bmips: Replace cpumask_weight() with cpumask_empty()
  • From: "tip-bot2 for Yury Norov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] genirq/affinity: Replace cpumask_weight() with cpumask_empty() where appropriate
  • From: "tip-bot2 for Yury Norov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] genirq/msi: Shutdown managed interrupts with unsatifiable affinities
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/gic-v3: Always trust the managed affinity provided by the core code
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] genirq: Always limit the affinity to online CPUs
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Also match function number in $PIR table
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Show the physical address of the $PIR table
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Include function number in $PIR table dump
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Handle IRQ swizzling with PIRQ routers
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Disambiguate SiS85C503 PIRQ router code entities
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Add support for the SiS85C497 PIRQ router
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Add PIRQ routing table range checks
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Handle PIRQ routing tables with no router device given
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Fix ALi M1487 (IBC) PIRQ router link value interpretation
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Fix coding style in PIRQ table verification
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/irq] x86/PCI: Add $IRT PIRQ routing table support
  • From: "tip-bot2 for Maciej W. Rozycki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clockevents: Use dedicated list iterator variable
  • From: "tip-bot2 for Jakob Koschel" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timers: Move timer sysctl into the timer code
  • From: "tip-bot2 for tangmeng" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
  • From: "tip-bot2 for Paul Gortmaker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] tick/sched: Fix non-kernel-doc comment
  • From: "tip-bot2 for Jiapeng Chong" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: sched/core] sched/tracing: Don't re-read p->state when emitting sched_switch event
  • From: Qais Yousef <qais.yousef@xxxxxxx>
• [tip: irq/urgent] Merge tag 'irqchip-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timers: Fix warning condition in __run_timers()
  • From: "tip-bot2 for Anna-Maria Behnsen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timers: Simplify calc_index()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] timers: Initialize base::next_expiry_recalc in timers_prepare_cpu()
  • From: "tip-bot2 for Anna-Maria Behnsen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Detect running as a TDX guest in early boot
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/boot: Port I/O: Add decompression-time support for TDX
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Detect TDX at early kernel decompression time
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Provide common base for SEAMCALL and TDCALL C wrappers
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Handle in-kernel MMIO
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/boot: Port I/O: Allow to hook up alternative helpers
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Extend the confidential computing API to support TDX guests
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Add MSR support for TDX guests
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/traps: Add #VE support for TDX guest
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Handle CPUID via #VE
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Add HLT support for TDX guests
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/traps: Refactor exc_general_protection()
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Exclude shared bit from __PHYSICAL_MASK
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Add __tdx_module_call() and __tdx_hypercall() helper functions
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86: Adjust types used in port I/O helpers
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86: Consolidate port I/O helpers
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Port I/O: Add runtime hypercalls
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Port I/O: Add early boot support
  • From: "tip-bot2 for Andi Kleen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Wire up KVM hypercalls
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/boot: Add a trampoline for booting APs via firmware handoff
  • From: "tip-bot2 for Sean Christopherson" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/acpi/x86/boot: Add multiprocessor wake-up support
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/boot: Avoid #VE during boot for TDX platforms
  • From: "tip-bot2 for Sean Christopherson" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/boot: Set CR0.NE early and keep it set during the boot
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx: Make pages shared in ioremap()
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/topology: Disable CPU online/offline control for TDX guests
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/mm/cpa: Add support for TDX shared memory
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/mm: Make DMA memory shared for TD guest
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] Documentation/x86: Document TDX kernel architecture
  • From: "tip-bot2 for Kuppuswamy Sathyanarayanan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] x86/tdx/ioapic: Add shared bit for IOAPIC base address
  • From: "tip-bot2 for Isaku Yamahata" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/tdx] ACPICA: Avoid cache flush inside virtual machines
  • From: "tip-bot2 for Kirill A. Shutemov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Add a helper for the PVALIDATE instruction
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Define the Linux-specific guest termination reasons
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/boot: Use MSR read/write helpers instead of inline assembly
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Detect/setup SEV/SME features earlier in boot
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] KVM: SVM: Update the SEV-ES save area mapping
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/head/64: Re-enable stack protection
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] KVM: SVM: Create a separate mapping for the SEV-ES save area
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/boot: Add Confidential Computing type to setup_data
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/boot: Introduce helpers for MSR reads/writes
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] KVM: SVM: Define sev_features and VMPL field in the VMSA
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Check the VMPL level
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Check SEV-SNP features support
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed: Add helper for validating pages in the decompression stage
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/mm: Extend cc_attr to include AMD SEV-SNP
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] KVM: x86: Move lookup of indexed CPUID leafs to helper
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Save the negotiated GHCB version
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed/64: Detect/setup SEV/SME features earlier during boot
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed/acpi: Move EFI vendor table lookup to helper
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Add helper for validating pages in early enc attribute changes
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed: Register GHCB memory when SEV-SNP is active
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] KVM: SVM: Create a separate mapping for the GHCB save area
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Register GHCB memory when SEV-SNP is active
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/mm: Validate memory when changing the C-bit
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Use SEV-SNP AP creation to start secondary CPUs
  • From: "tip-bot2 for Tom Lendacky" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/kernel: Mark the .bss..decrypted section as shared in the RMP table
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/kernel: Validate ROM memory before accessing when SEV-SNP is active
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed/acpi: Move EFI detection to helper
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed/acpi: Move EFI kexec handling into common code
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed/acpi: Move EFI system table lookup to helper
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed/acpi: Move EFI config table lookup to helper
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/boot: Add a pointer to Confidential Computing blob in bootparams
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Move MSR-based VMGEXITs for CPUID to helper
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
  • From: "tip-bot2 for Peter Gonda" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Add a sev= cmdline option
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed: Use firmware-validated CPUID leaves for SEV-SNP guests
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: Add SEV-SNP guest driver
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed: Add SEV-SNP feature detection/setup
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed: Export and rename add_identity_map()
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Add SEV-SNP feature detection/setup
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: sevguest: Add support to derive key
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/compressed/64: Add identity mapping for Confidential Computing blob
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: sevguest: Add support to get extended report
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Provide support for SNP guest request NAEs
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Register SEV-SNP guest request platform device
  • From: "tip-bot2 for Brijesh Singh" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev: Use firmware-validated CPUID for SEV-SNP guests
  • From: "tip-bot2 for Michael Roth" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/build] x86/build: Don't build CONFIG_X86_32 as -ffreestanding
  • From: Borislav Petkov <bp@xxxxxxx>
• Re: [tip: x86/build] x86/build: Don't build CONFIG_X86_32 as -ffreestanding
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [tip: x86/platform] x86/platform/uv: Update NMI Handler for UV5
  • From: "tip-bot2 for Mike Travis" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/platform] x86/platform/uv: Update TSC sync state for UV5
  • From: "tip-bot2 for Mike Travis" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/platform] x86/platform/uv: Log gap hole end size
  • From: "tip-bot2 for Mike Travis" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/build: Don't build CONFIG_X86_32 as -ffreestanding
  • From: "tip-bot2 for Nick Desaulniers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/msi: Fix msi message data shadow struct
  • From: "tip-bot2 for Reto Buerki" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86,bpf: Avoid IBT objtool warning
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/extable: Prefer local labels in .set directives
  • From: "tip-bot2 for Nick Desaulniers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/configs: Add x86 debugging Kconfig fragment plus docs
  • From: "tip-bot2 for Dave Hansen" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/build] x86/configs: Add x86 debugging Kconfig fragment plus docs
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/build] x86/configs: Add x86 debugging Kconfig fragment plus docs
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• [tip: x86/cpu] x86/speculation/srbds: Do not try to turn mitigation off when not supported
  • From: tip-bot2 for Ricardo Cañuelo <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/misc] x86/delay: Fix the wrong asm constraint in delay_loop()
  • From: "tip-bot2 for Ammar Faizi" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sev] x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
  • From: "tip-bot2 for Peter Gonda" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/misc] x86/amd_nb: Unexport amd_cache_northbridges()
  • From: "tip-bot2 for Muralidhara M K" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/configs: Add x86 debugging Kconfig fragment plus docs
  • From: "tip-bot2 for Dave Hansen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: ras/core] x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails
  • From: "tip-bot2 for Ammar Faizi" <tip-bot2@xxxxxxxxxxxxx>
• [tip: ras/core] x86/mce: Avoid unnecessary padding in struct mce_bank
  • From: "tip-bot2 for Smita Koralahalli" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] static_call: Remove __DEFINE_STATIC_CALL macro
  • From: "tip-bot2 for Christophe Leroy" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Add AMD Fam19h Branch Sampling support
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/uncore: Add Raptor Lake uncore support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] ftrace: Use preemption model accessors for trace header printout
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] kcsan: Use preemption model accessors
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Always set cpuctx cgrp when enable cgroup event
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86: Unify format of events sysfs show
  • From: "tip-bot2 for Yang Jihong" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/rwsem: No need to check for handoff bit if wait queue empty
  • From: "tip-bot2 for Waiman Long" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] ACPI: Add perf low power callback
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] objtool: Fix IBT tail-call detection
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/msr: Add Raptor Lake CPU support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] x86/percpu: Remove volatile from arch_raw_cpu_ptr().
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86: Add Intel Raptor Lake support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/rwsem: Always try to wake waiters in out_nolock path
  • From: "tip-bot2 for Waiman Long" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Don't pass task around when ctx sched in
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/rwsem: Conditionally wake waiters in reader/writer slowpaths
  • From: "tip-bot2 for Waiman Long" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] preempt/dynamic: Introduce preemption model accessors
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] lockdep: Fix -Wunused-parameter for _THIS_IP_
  • From: "tip-bot2 for Nick Desaulniers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Enable branch sampling priv level filtering
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/mutex: Make contention tracepoints more consistent wrt adaptive spinning
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Add AMD branch sampling period adjustment
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] Revert "mm/page_alloc: mark pagesets as __maybe_unused"
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Add branch-brs helper event for Fam19h BRS
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
  • From: "tip-bot2 for Christophe Leroy" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/core: Add perf_clear_branch_entry_bitfields() helper
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking: Add lock contention tracepoints
  • From: "tip-bot2 for Namhyung Kim" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Fix perf_cgroup_switch()
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/intel: Don't extend the pseudo-encoding to GP counters
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking: Apply contention tracepoints in the slow path
  • From: "tip-bot2 for Namhyung Kim" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched: Teach the forced-newidle balancer about CPU affinity limitation.
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Make Zen3 branch sampling opt-in
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Add idle hooks for branch sampling
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] x86,static_call: Fix __static_call_return0 for i386
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/urgent] static_call: Don't make __static_call_return0 static
  • From: "tip-bot2 for Christophe Leroy" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/cstate: Add Raptor Lake support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] objtool: Fix SLS validation for kcov tail-call replacement
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Inherit event_caps
  • From: "tip-bot2 for Namhyung Kim" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Use perf_cgroup_info->active to check if cgroup is active
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] x86/cpufeatures: Add AMD Fam19h Branch Sampling feature
  • From: "tip-bot2 for Stephane Eranian" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/bug: Prevent shadowing in __WARN_FLAGS
  • From: "tip-bot2 for Vincent Mailhol" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/core: Fix forceidle balancing
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
  • From: "tip-bot2 for Sven Schnelle" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/pkeys: Clean up arch_set_user_pkey_access() declaration
  • From: "tip-bot2 for Ira Weiny" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/pkeys: Remove __arch_set_user_pkey_access() declaration
  • From: "tip-bot2 for Ira Weiny" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/cpu: Remove "nosmep"
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/cpu: Remove "noexec"
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/cpu: Remove "nosep"
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/platform] x86/platform/uv: Update TSC sync state for UV5
  • From: "tip-bot2 for Mike Travis" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/platform] x86/platform/uv: Update NMI Handler for UV5
  • From: "tip-bot2 for Mike Travis" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] x86/mm: Force-inline __phys_addr_nodebug()
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/mm/tlb: Revert retpoline avoidance approach
  • From: "tip-bot2 for Dave Hansen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] x86/kvm/svm: Force-inline GHCB accessors
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/cpu: Remove "noclflush"
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/platform] x86/platform/uv: Log gap hole end size
  • From: "tip-bot2 for Mike Travis" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] task_stack, x86/cea: Force-inline stack helpers
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mm] x86/fault: Cast an argument to the proper address space in prefetch()
  • From: "tip-bot2 for Lukas Bulwahn" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mm] x86/mm/tlb: Revert retpoline avoidance approach
  • From: "tip-bot2 for Dave Hansen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mm] x86/mm/tlb: Revert retpoline avoidance approach
  • From: "tip-bot2 for Dave Hansen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu: Remove redundant XCOMP_BV initialization
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu: Cache xfeature flags from CPUID
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu/xsave: Initialize offset/size cache early
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu: Remove unused supervisor only offsets
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu/xstate: Handle supervisor states in XSTATE permissions
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu/xstate: Consolidate size calculations
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/urgent] Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• RE: [tip: x86/urgent] x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [tip: x86/urgent] x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  • From: "tip-bot2 for Joerg Roedel" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/urgent] x86/config: Make the x86 defconfigs a bit more usable
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/config: Make the x86 defconfigs a bit more usable
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/urgent] x86/config: Make the x86 defconfigs a bit more usable
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• [tip: x86/urgent] x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  • From: "tip-bot2 for Joerg Roedel" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/urgent] x86/config: Make the x86 defconfigs a bit more usable
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/config: Make the x86 defconfigs a bit more usable
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/defconfig: Enable WERROR
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
  • From: "tip-bot2 for Yang Zhong" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
  • From: "tip-bot2 for Chang S. Bae" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
  • From: "tip-bot2 for Nathan Chancellor" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] kbuild: Fixup the IBT kbuild changes
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
  • From: "tip-bot2 for Nathan Chancellor" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] kvm/emulate: Fix SETcc emulation for ENDBR
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/numa: Fix boot crash on arm64 systems
  • From: "tip-bot2 for Huang, Ying" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: ARM needs asm/paravirt_api_clock.h too
  • From: "tip-bot2 for Randy Dunlap" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] headers/prep: Fix header to build standalone: <linux/psi.h>
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] kvm/emulate: Fix SETcc emulation for ENDBR
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
  • From: "tip-bot2 for Nathan Chancellor" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
  • From: "tip-bot2 for Nathan Chancellor" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/core] kbuild: Fixup the IBT kbuild changes
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [tip: x86/core] kbuild: Fixup the IBT kbuild changes
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/core] objtool: Find unused ENDBR instructions
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [tip: x86/core] objtool: Find unused ENDBR instructions
  • From: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
• [tip: x86/cleanups] x86/nmi: Remove the 'strange power saving mode' hint from unknown NMI handler
  • From: "tip-bot2 for Jiri Kosina" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/misc] MAINTAINERS: Mark VMware mailing list entries as email aliases
  • From: "tip-bot2 for Srivatsa S. Bhat (VMware)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/misc] MAINTAINERS: Update maintainers for paravirt ops and VMware hypervisor interface
  • From: "tip-bot2 for Srivatsa S. Bhat (VMware)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/misc] MAINTAINERS: Add Zack as maintainer of vmmouse driver
  • From: "tip-bot2 for Srivatsa S. Bhat (VMware)" <tip-bot2@xxxxxxxxxxxxx>
• RE: [tip: x86/core] objtool: Find unused ENDBR instructions
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [tip: x86/core] x86/ibt,entry: Sprinkle ENDBR dust
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] tools/objtool: Check for use of the ENQCMD instruction in the kernel
  • From: "tip-bot2 for Fenghua Yu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/entry: Cleanup PARAVIRT
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool,efi: Update __efi64_thunk annotation
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Default ignore INT3 for unreachable
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] static_call: Avoid building empty .static_call_sites
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/text-patching: Make text_gen_insn() play nice with ANNOTATE_NOENDBR
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/entry,xen: Early rewrite of restore_regs_and_return_to_kernel()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/linkage: Add ENDBR to SYM_FUNC_START*()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Have WARN_FUNC fall back to sym+off
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Add --dry-run
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt: Add ANNOTATE_NOENDBR
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt: Base IBT bits
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,xen: Sprinkle the ENDBR
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,crypto: Add ENDBR for the jump-table entries
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,ftrace: Search for __fentry__ location
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,paravirt: Sprinkle ENDBR
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,kvm: Add ENDBR to fastops
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,kexec: Disable CET on kexec
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt: Annotate text references
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,bpf: Add ENDBR instructions to prologue and trampoline
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/alternative: Simplify int3_selftest_ip
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt: Add IBT feature, MSR and #CP handling
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,ftrace: Make function-graph play nice
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/livepatch: Validate __fentry__ location
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,kprobes: Cure sym+0 equals fentry woes
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,ftrace: Add ENDBR to samples/ftrace
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt: Disable IBT around firmware
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt: Ensure module init/exit points have references
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,sev: Annotations
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Rename --duplicate to --lto
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt: Dont generate ENDBR in .discard.text
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt,ftrace: Annotate ftrace code patching
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] exit: Mark do_group_exit() __noreturn
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: Mark __invalid_creds() __noreturn
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: Annotate idtentry_df()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: Annotate call_on_stack()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Rework ASM_REACHABLE
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: Mark stop_this_cpu() __noreturn
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Ignore extra-symbol code
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Validate IBT assumptions
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Find unused ENDBR instructions
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/alternative: Use .ibt_endbr_seal to seal indirect calls
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Read the NOENDBR annotation
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] objtool: Add IBT/ENDBR decoding
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: Remove toolchain check for X32 ABI capability
  • From: "tip-bot2 for Masahiro Yamada" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
  • From: "tip-bot2 for Nathan Chancellor" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Fix header to build standalone: <linux/sched_clock.h>
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Add header guard to kernel/sched/sched.h
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Add initial new headers as identity mappings
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Add header guard to kernel/sched/stats.h and kernel/sched/autogroup.h
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: sched/clock: Mark all functions 'notrace', remove CC_FLAGS_FTRACE build asymmetry
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Standardize kernel/sched/sched.h header dependencies
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Make the <linux/sched/deadline.h> header build standalone
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Fix comment typo in kernel/sched/cpudeadline.c
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Introduce kernel/sched/build_policy.c and build multiple .c files there
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Reorganize, clean up and optimize kernel/sched/core.c dependencies
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Introduce kernel/sched/build_utility.c and build multiple .c files there
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Reorganize, clean up and optimize kernel/sched/build_utility.c dependencies
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Reorganize, clean up and optimize kernel/sched/fair.c dependencies
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/headers: Reorganize, clean up and optimize kernel/sched/build_policy.c dependencies
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] Merge branch 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] Merge tag 'timers-v5.18-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/imx-sysctr: Drop IRQF_IRQPOLL
  • From: "tip-bot2 for Peng Fan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/imx-tpm: Mark two variable with __ro_after_init
  • From: "tip-bot2 for Peng Fan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix
  • From: "tip-bot2 for Drew Fustini" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/imx-tpm: Exclude sched clock for ARM64
  • From: "tip-bot2 for Peng Fan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/imx-tpm: Update name of clkevt
  • From: "tip-bot2 for Peng Fan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/imx-tpm: Drop IRQF_IRQPOLL
  • From: "tip-bot2 for Peng Fan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/exynos_mct: Remove mct interrupt index enum
  • From: "tip-bot2 for Alim Akhtar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts
  • From: "tip-bot2 for Krzysztof Kozlowski" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/exynos_mct: Bump up mct max irq number
  • From: "tip-bot2 for Alim Akhtar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/imx-tpm: Add CLOCK_EVT_FEAT_DYNIRQ
  • From: "tip-bot2 for Peng Fan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/arm_arch_timer: Use event stream scaling when available
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/exynos_mct: Increase the size of name array
  • From: "tip-bot2 for Alim Akhtar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-microchip-pit64b: Remove mmio selection
  • From: "tip-bot2 for Claudiu Beznea" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-microchip-pit64b: Use notrace
  • From: "tip-bot2 for Claudiu Beznea" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] dt-bindings: timer: Tegra: Convert text bindings to yaml
  • From: "tip-bot2 for David Heidelberg" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/imx-tpm: Move tpm_read_sched_clock() under CONFIG_ARM
  • From: "tip-bot2 for Nathan Chancellor" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()
  • From: "tip-bot2 for Guillaume Ranquet" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] tick: Detect and fix jiffies update stall
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-microchip-pit64b: Use 5MHz for clockevent
  • From: "tip-bot2 for Claudiu Beznea" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] tick/rcu: Remove obsolete rcu_needs_cpu() parameters
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] tick/rcu: Stop allowing RCU_SOFTIRQ in idle
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] lib/irq_poll: Declare IRQ_POLL softirq vector as ksoftirqd-parking safe
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] Merge tag 'irqchip-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/ibt: Fix CC_HAS_IBT check for clang
  • From: "tip-bot2 for Nathan Chancellor" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] cgroup: Fix suspicious rcu_dereference_check() usage warning
  • From: "tip-bot2 for Chengming Zhou" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/sgx: Free backing memory after faulting the enclave page
  • From: "tip-bot2 for Jarkko Sakkinen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/traps: Mark do_int3() NOKPROBE_SYMBOL
  • From: "tip-bot2 for Li Huafei" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86: Remove a.out support
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86,ftrace: Fix modify_ftrace_direct()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: Fix {int3,ibt}_selftest() vs LTO
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86,bpf: Fix bpf_arch_text_poke()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/sgx] x86/sgx: Free backing memory after faulting the enclave page
  • From: "tip-bot2 for Jarkko Sakkinen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
  • From: "tip-bot2 for Ross Philipson" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/boot: Fix memremap of setup_indirect structures
  • From: "tip-bot2 for Ross Philipson" <tip-bot2@xxxxxxxxxxxxx>