The following commit has been merged into the irq/urgent branch of tip: Commit-ID: 8707898e22fd665bc1d7b18b809be4b56ce25bdd Gitweb: https://git.kernel.org/tip/8707898e22fd665bc1d7b18b809be4b56ce25bdd Author: Thomas Pfaff <tpfaff@xxxxxxx> AuthorDate: Mon, 02 May 2022 13:28:29 +02:00 Committer: Thomas Gleixner <tglx@xxxxxxxxxxxxx> CommitterDate: Thu, 05 May 2022 11:54:05 +02:00 genirq: Synchronize interrupt thread startup A kernel hang can be observed when running setserial in a loop on a kernel with force threaded interrupts. The sequence of events is: setserial open("/dev/ttyXXX") request_irq() do_stuff() -> serial interrupt -> wake(irq_thread) desc->threads_active++; close() free_irq() kthread_stop(irq_thread) synchronize_irq() <- hangs because desc->threads_active != 0 The thread is created in request_irq() and woken up, but does not get on a CPU to reach the actual thread function, which would handle the pending wake-up. kthread_stop() sets the should stop condition which makes the thread immediately exit, which in turn leaves the stale threads_active count around. This problem was introduced with commit 519cc8652b3a, which addressed a interrupt sharing issue in the PCIe code. Before that commit free_irq() invoked synchronize_irq(), which waits for the hard interrupt handler and also for associated threads to complete. To address the PCIe issue synchronize_irq() was replaced with __synchronize_hardirq(), which only waits for the hard interrupt handler to complete, but not for threaded handlers. This was done under the assumption, that the interrupt thread already reached the thread function and waits for a wake-up, which is guaranteed to be handled before acting on the stop condition. The problematic case, that the thread would not reach the thread function, was obviously overlooked. Make sure that the interrupt thread is really started and reaches thread_fn() before returning from __setup_irq(). This utilizes the existing wait queue in the interrupt descriptor. The wait queue is unused for non-shared interrupts. For shared interrupts the usage might cause a spurious wake-up of a waiter in synchronize_irq() or the completion of a threaded handler might cause a spurious wake-up of the waiter for the ready flag. Both are harmless and have no functional impact. [ tglx: Amended changelog ] Fixes: 519cc8652b3a ("genirq: Synchronize only with single thread on free_irq()") Signed-off-by: Thomas Pfaff <tpfaff@xxxxxxx> Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Reviewed-by: Marc Zyngier <maz@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Link: https://lore.kernel.org/r/552fe7b4-9224-b183-bb87-a8f36d335690@xxxxxxx --- kernel/irq/internals.h | 2 ++ kernel/irq/irqdesc.c | 2 ++ kernel/irq/manage.c | 39 +++++++++++++++++++++++++++++---------- 3 files changed, 33 insertions(+), 10 deletions(-) diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h index 99cbdf5..f09c603 100644 --- a/kernel/irq/internals.h +++ b/kernel/irq/internals.h @@ -29,12 +29,14 @@ extern struct irqaction chained_action; * IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed * IRQTF_AFFINITY - irq thread is requested to adjust affinity * IRQTF_FORCED_THREAD - irq action is force threaded + * IRQTF_READY - signals that irq thread is ready */ enum { IRQTF_RUNTHREAD, IRQTF_WARNED, IRQTF_AFFINITY, IRQTF_FORCED_THREAD, + IRQTF_READY, }; /* diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c index 939d21c..0099b87 100644 --- a/kernel/irq/irqdesc.c +++ b/kernel/irq/irqdesc.c @@ -407,6 +407,7 @@ static struct irq_desc *alloc_desc(int irq, int node, unsigned int flags, lockdep_set_class(&desc->lock, &irq_desc_lock_class); mutex_init(&desc->request_mutex); init_rcu_head(&desc->rcu); + init_waitqueue_head(&desc->wait_for_threads); desc_set_defaults(irq, desc, node, affinity, owner); irqd_set(&desc->irq_data, flags); @@ -575,6 +576,7 @@ int __init early_irq_init(void) raw_spin_lock_init(&desc[i].lock); lockdep_set_class(&desc[i].lock, &irq_desc_lock_class); mutex_init(&desc[i].request_mutex); + init_waitqueue_head(&desc[i].wait_for_threads); desc_set_defaults(i, &desc[i], node, NULL, NULL); } return arch_early_irq_init(); diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index c03f71d..e3e245a 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1249,6 +1249,31 @@ static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action) } /* + * Internal function to notify that a interrupt thread is ready. + */ +static void irq_thread_set_ready(struct irq_desc *desc, + struct irqaction *action) +{ + set_bit(IRQTF_READY, &action->thread_flags); + wake_up(&desc->wait_for_threads); +} + +/* + * Internal function to wake up a interrupt thread and wait until it is + * ready. + */ +static void wake_up_and_wait_for_irq_thread_ready(struct irq_desc *desc, + struct irqaction *action) +{ + if (!action || !action->thread) + return; + + wake_up_process(action->thread); + wait_event(desc->wait_for_threads, + test_bit(IRQTF_READY, &action->thread_flags)); +} + +/* * Interrupt handler thread */ static int irq_thread(void *data) @@ -1259,6 +1284,8 @@ static int irq_thread(void *data) irqreturn_t (*handler_fn)(struct irq_desc *desc, struct irqaction *action); + irq_thread_set_ready(desc, action); + sched_set_fifo(current); if (force_irqthreads() && test_bit(IRQTF_FORCED_THREAD, @@ -1683,8 +1710,6 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) } if (!shared) { - init_waitqueue_head(&desc->wait_for_threads); - /* Setup the type (level, edge polarity) if configured: */ if (new->flags & IRQF_TRIGGER_MASK) { ret = __irq_set_trigger(desc, @@ -1780,14 +1805,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) irq_setup_timings(desc, new); - /* - * Strictly no need to wake it up, but hung_task complains - * when no hard interrupt wakes the thread up. - */ - if (new->thread) - wake_up_process(new->thread); - if (new->secondary) - wake_up_process(new->secondary->thread); + wake_up_and_wait_for_irq_thread_ready(desc, new); + wake_up_and_wait_for_irq_thread_ready(desc, new->secondary); register_irq_proc(irq, desc); new->dir = NULL;
![]() |