On Mon, Aug 13, 2012 at 7:39 PM, Felipe Balbi <balbi@xxxxxx> wrote: > On Mon, Aug 13, 2012 at 06:52:13PM +0530, Munegowda, Keshava wrote: >> On Fri, Jul 27, 2012 at 5:44 PM, Munegowda, Keshava >> <keshava_mgowda@xxxxxx> wrote: >> > On Mon, Jul 23, 2012 at 8:04 PM, Munegowda, Keshava >> > <keshava_mgowda@xxxxxx> wrote: >> >> On Mon, Jul 23, 2012 at 7:38 PM, Felipe Balbi <balbi@xxxxxx> wrote: >> >>> Hi, >> >>> >> >>> On Mon, Jul 23, 2012 at 07:31:10PM +0530, Munegowda, Keshava wrote: >> >>>> On Thu, Jul 19, 2012 at 3:48 PM, Munegowda, Keshava >> >>>> <keshava_mgowda@xxxxxx> wrote: >> >>>> > On Mon, Jul 16, 2012 at 7:01 PM, Keshava Munegowda >> >>>> > <keshava_mgowda@xxxxxx> wrote: >> >>>> >> The TLL (Transceiver Less Link) is an separate IP block, independent of >> >>>> >> the host controller. Basically this TLL operates like USB PHY which allows >> >>>> >> the user to connect two USB transceiver interfaces together directly >> >>>> >> without the use of differential transceivers in omap3 and later chips. >> >>>> >> The TLL configuration is removed from the UHH driver and implemented as >> >>>> >> a seperate platform driver. Now, the UHH driver configures the TLL >> >>>> >> through API's exported by the TLL platform driver. >> >>>> >> >> >>>> >> Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx> >> >>>> >> >> >>>> >> In v4: >> >>>> >> - rebased on top of linux kernel version 3.5.rc7 >> >>>> >> - reworked as per the comments given by Paul Walmsley <paul@xxxxxxxxx> >> >>>> >> >> >>>> >> In v3: >> >>>> >> - rebased on top V3 of Russ dill's patch >> >>>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' >> >>>> >> fixes an issue where the ULPI PHYs were not held in reset >> >>>> >> while initializing the EHCI controller >> >>>> >> http://permalink.gmane.org/gmane.linux.usb.general/65988 >> >>>> >> >> >>>> >> - rebased on top of patch >> >>>> >> OMAP: USB : Fix the EHCI enumeration and core retention issue >> >>>> >> http://permalink.gmane.org/gmane.linux.usb.general/66239 >> >>>> >> >> >>>> >> In V2: >> >>>> >> - covered review comments from linux omap and usb community >> >>>> >> - rebased on top Russ dill's patch >> >>>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' >> >>>> >> fixes an issue where the ULPI PHYs were not held in reset >> >>>> >> while initializing the EHCI controller >> >>>> >> >> >>>> >> Keshava Munegowda (5): >> >>>> >> ARM: OMAP: Add the USB TLL clocks device name >> >>>> >> ARM: OMAP: USB: HOST TLL platform driver >> >>>> >> ARM: OMAP: USB: Invoke the TLL driver from USB HS core driver >> >>>> >> ARM: OMAP: USB: Remove TLL specific code from USB HS core driver >> >>>> >> ARM: OMAP: Remove older device name of the USB TLL clocks >> >>>> >> >> >>>> >> arch/arm/mach-omap2/clock3xxx_data.c | 8 +- >> >>>> >> arch/arm/mach-omap2/clock44xx_data.c | 4 +- >> >>>> >> arch/arm/mach-omap2/usb-host.c | 31 ++- >> >>>> >> arch/arm/plat-omap/include/plat/usb.h | 7 + >> >>>> >> drivers/mfd/Kconfig | 2 +- >> >>>> >> drivers/mfd/Makefile | 2 +- >> >>>> >> drivers/mfd/omap-usb-host.c | 238 ++--------------- >> >>>> >> drivers/mfd/omap-usb-tll.c | 471 +++++++++++++++++++++++++++++++++ >> >>>> >> 8 files changed, 523 insertions(+), 240 deletions(-) >> >>>> >> create mode 100644 drivers/mfd/omap-usb-tll.c >> >>>> >> >> >>>> >> -- >> >>>> >> 1.7.9.5 >> >>>> > >> >>>> > >> >>>> > Felipe/ Paul >> >>>> > please let me know if you have any review comments on this v4 series. >> >>>> > >> >>>> > regards >> >>>> > keshava >> >>>> >> >>>> Hi Felipe >> >>>> please let me know if you have any review comments on this series now. >> >>> >> >>> looks ok... pretty much just moving code around. >> >>> >> >>> -- >> >>> balbi >> >> >> >> >> >> Thanks Felipe >> >> >> >> then I request please give your Ack by for this series. >> >> >> >> regards >> >> keshava >> > >> > Hi Paul >> > do you have any review comments on this series? >> > Felipe is OK with this series. if there are no review comments on this series >> > I request your ack by for the same. >> > Once this series gets in to mainline. i will start the Device tree >> > conversion for usb2 host. >> > >> > regards >> > keshava >> >> Hi Felipe >> please give you ack by this series , so that I request >> samuel to merge to mainline. > > sure, here you go > > Acked-by: Felipe Balbi <balbi@xxxxxx> > > -- > balbi Thanks Felipe Samuel I request please queue this series for the next merge window. regards keshava -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
