On Mon, Jul 23, 2012 at 8:04 PM, Munegowda, Keshava <keshava_mgowda@xxxxxx> wrote: > On Mon, Jul 23, 2012 at 7:38 PM, Felipe Balbi <balbi@xxxxxx> wrote: >> Hi, >> >> On Mon, Jul 23, 2012 at 07:31:10PM +0530, Munegowda, Keshava wrote: >>> On Thu, Jul 19, 2012 at 3:48 PM, Munegowda, Keshava >>> <keshava_mgowda@xxxxxx> wrote: >>> > On Mon, Jul 16, 2012 at 7:01 PM, Keshava Munegowda >>> > <keshava_mgowda@xxxxxx> wrote: >>> >> The TLL (Transceiver Less Link) is an separate IP block, independent of >>> >> the host controller. Basically this TLL operates like USB PHY which allows >>> >> the user to connect two USB transceiver interfaces together directly >>> >> without the use of differential transceivers in omap3 and later chips. >>> >> The TLL configuration is removed from the UHH driver and implemented as >>> >> a seperate platform driver. Now, the UHH driver configures the TLL >>> >> through API's exported by the TLL platform driver. >>> >> >>> >> Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx> >>> >> >>> >> In v4: >>> >> - rebased on top of linux kernel version 3.5.rc7 >>> >> - reworked as per the comments given by Paul Walmsley <paul@xxxxxxxxx> >>> >> >>> >> In v3: >>> >> - rebased on top V3 of Russ dill's patch >>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' >>> >> fixes an issue where the ULPI PHYs were not held in reset >>> >> while initializing the EHCI controller >>> >> http://permalink.gmane.org/gmane.linux.usb.general/65988 >>> >> >>> >> - rebased on top of patch >>> >> OMAP: USB : Fix the EHCI enumeration and core retention issue >>> >> http://permalink.gmane.org/gmane.linux.usb.general/66239 >>> >> >>> >> In V2: >>> >> - covered review comments from linux omap and usb community >>> >> - rebased on top Russ dill's patch >>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' >>> >> fixes an issue where the ULPI PHYs were not held in reset >>> >> while initializing the EHCI controller >>> >> >>> >> Keshava Munegowda (5): >>> >> ARM: OMAP: Add the USB TLL clocks device name >>> >> ARM: OMAP: USB: HOST TLL platform driver >>> >> ARM: OMAP: USB: Invoke the TLL driver from USB HS core driver >>> >> ARM: OMAP: USB: Remove TLL specific code from USB HS core driver >>> >> ARM: OMAP: Remove older device name of the USB TLL clocks >>> >> >>> >> arch/arm/mach-omap2/clock3xxx_data.c | 8 +- >>> >> arch/arm/mach-omap2/clock44xx_data.c | 4 +- >>> >> arch/arm/mach-omap2/usb-host.c | 31 ++- >>> >> arch/arm/plat-omap/include/plat/usb.h | 7 + >>> >> drivers/mfd/Kconfig | 2 +- >>> >> drivers/mfd/Makefile | 2 +- >>> >> drivers/mfd/omap-usb-host.c | 238 ++--------------- >>> >> drivers/mfd/omap-usb-tll.c | 471 +++++++++++++++++++++++++++++++++ >>> >> 8 files changed, 523 insertions(+), 240 deletions(-) >>> >> create mode 100644 drivers/mfd/omap-usb-tll.c >>> >> >>> >> -- >>> >> 1.7.9.5 >>> > >>> > >>> > Felipe/ Paul >>> > please let me know if you have any review comments on this v4 series. >>> > >>> > regards >>> > keshava >>> >>> Hi Felipe >>> please let me know if you have any review comments on this series now. >> >> looks ok... pretty much just moving code around. >> >> -- >> balbi > > > Thanks Felipe > > then I request please give your Ack by for this series. > > regards > keshava Hi Paul do you have any review comments on this series? Felipe is OK with this series. if there are no review comments on this series I request your ack by for the same. Once this series gets in to mainline. i will start the Device tree conversion for usb2 host. regards keshava -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
