On Fri, Jul 27, 2012 at 5:44 PM, Munegowda, Keshava <keshava_mgowda@xxxxxx> wrote: > On Mon, Jul 23, 2012 at 8:04 PM, Munegowda, Keshava > <keshava_mgowda@xxxxxx> wrote: >> On Mon, Jul 23, 2012 at 7:38 PM, Felipe Balbi <balbi@xxxxxx> wrote: >>> Hi, >>> >>> On Mon, Jul 23, 2012 at 07:31:10PM +0530, Munegowda, Keshava wrote: >>>> On Thu, Jul 19, 2012 at 3:48 PM, Munegowda, Keshava >>>> <keshava_mgowda@xxxxxx> wrote: >>>> > On Mon, Jul 16, 2012 at 7:01 PM, Keshava Munegowda >>>> > <keshava_mgowda@xxxxxx> wrote: >>>> >> The TLL (Transceiver Less Link) is an separate IP block, independent of >>>> >> the host controller. Basically this TLL operates like USB PHY which allows >>>> >> the user to connect two USB transceiver interfaces together directly >>>> >> without the use of differential transceivers in omap3 and later chips. >>>> >> The TLL configuration is removed from the UHH driver and implemented as >>>> >> a seperate platform driver. Now, the UHH driver configures the TLL >>>> >> through API's exported by the TLL platform driver. >>>> >> >>>> >> Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx> >>>> >> >>>> >> In v4: >>>> >> - rebased on top of linux kernel version 3.5.rc7 >>>> >> - reworked as per the comments given by Paul Walmsley <paul@xxxxxxxxx> >>>> >> >>>> >> In v3: >>>> >> - rebased on top V3 of Russ dill's patch >>>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' >>>> >> fixes an issue where the ULPI PHYs were not held in reset >>>> >> while initializing the EHCI controller >>>> >> http://permalink.gmane.org/gmane.linux.usb.general/65988 >>>> >> >>>> >> - rebased on top of patch >>>> >> OMAP: USB : Fix the EHCI enumeration and core retention issue >>>> >> http://permalink.gmane.org/gmane.linux.usb.general/66239 >>>> >> >>>> >> In V2: >>>> >> - covered review comments from linux omap and usb community >>>> >> - rebased on top Russ dill's patch >>>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' >>>> >> fixes an issue where the ULPI PHYs were not held in reset >>>> >> while initializing the EHCI controller >>>> >> >>>> >> Keshava Munegowda (5): >>>> >> ARM: OMAP: Add the USB TLL clocks device name >>>> >> ARM: OMAP: USB: HOST TLL platform driver >>>> >> ARM: OMAP: USB: Invoke the TLL driver from USB HS core driver >>>> >> ARM: OMAP: USB: Remove TLL specific code from USB HS core driver >>>> >> ARM: OMAP: Remove older device name of the USB TLL clocks >>>> >> >>>> >> arch/arm/mach-omap2/clock3xxx_data.c | 8 +- >>>> >> arch/arm/mach-omap2/clock44xx_data.c | 4 +- >>>> >> arch/arm/mach-omap2/usb-host.c | 31 ++- >>>> >> arch/arm/plat-omap/include/plat/usb.h | 7 + >>>> >> drivers/mfd/Kconfig | 2 +- >>>> >> drivers/mfd/Makefile | 2 +- >>>> >> drivers/mfd/omap-usb-host.c | 238 ++--------------- >>>> >> drivers/mfd/omap-usb-tll.c | 471 +++++++++++++++++++++++++++++++++ >>>> >> 8 files changed, 523 insertions(+), 240 deletions(-) >>>> >> create mode 100644 drivers/mfd/omap-usb-tll.c >>>> >> >>>> >> -- >>>> >> 1.7.9.5 >>>> > >>>> > >>>> > Felipe/ Paul >>>> > please let me know if you have any review comments on this v4 series. >>>> > >>>> > regards >>>> > keshava >>>> >>>> Hi Felipe >>>> please let me know if you have any review comments on this series now. >>> >>> looks ok... pretty much just moving code around. >>> >>> -- >>> balbi >> >> >> Thanks Felipe >> >> then I request please give your Ack by for this series. >> >> regards >> keshava > > Hi Paul > do you have any review comments on this series? > Felipe is OK with this series. if there are no review comments on this series > I request your ack by for the same. > Once this series gets in to mainline. i will start the Device tree > conversion for usb2 host. > > regards > keshava Hi Felipe please give you ack by this series , so that I request samuel to merge to mainline. regards keshava -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
