Tomi Orava wrote: > Hi, > > >> Well, as I said it compiles and works with the above kernel and v4l-dvb >> but w_scan finds no channels with this module most of the time. In 5 >> runs it found 4 channels on one multiplex. >> I doubt it's the antenna although it's the stock one but if I use the >> cinergyT2 on my desktop pc with the original module of kernel 2.6.25.1 >> w_scan finds all available channels all the time with the same antenna >> in the same place. I will try a better antenna tomorrow to see if I can >> use it somewhat productive in mythtv... > > Does the "regular" scandvb work any better for you compared > to the older driver ? No, not realy. It find's and tunes only half of the channels available at my location. > BTW. Where's the source for this w_scan so that I could try it as well ? You find it here, at the bottom of the page: http://wirbel.htpc-forum.de/w_scan/index2.html If I supply the parameter -t 3 to w_scan scan which sets the tuning timeout to 'slow' the card finds almost all channels all the time... > > Regards, > Tomi Orava Got a better Antenna today, will try it later. Greetings, Ingo Peukes _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
