On Sun, Oct 14, 2007 at 13:33:03 +0300, Tomi Orava wrote: > > Hi, > > Attached is a latest version of "alternative" driver for the Terratec > Cinergy T2 USB device. The driver is heavily based on existing Cinergy T2 > driver but it has been modified to fit more or less into the DVB-USB > driver framework like most of the other USB-based device drivers currently > included in kernel. > > This version also has the remote control support merged back into the driver. > I'm very interested in hearing any kinds of comments about the driver. AFAICS, all channels work here. The remote control also mostly works: the OK and the blue button don't generate the proper lirc events. I stopped the lircd and when I press OK then it acts like the return key, so the button is event works. Then I tried irrecord in the case that the lirc codes have changed slightly, without luck: $ sudo /usr/bin/irrecord -H dev/input -d /dev/input/by-id2/0ccd-0038 lirc.conf [bla bla bla] Press RETURN to continue. Hold down an arbitrary button. /usr/bin/irrecord: gap not found, can't continue (Of cause, I pressed a button and held it down) Regards, Tino _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
