On Thu, 2008-03-20 at 14:07 -0300, Mauro Carvalho Chehab wrote: > On Fri, 21 Mar 2008 01:28:23 +0900 > timf <timf@xxxxxxxxxxxx> wrote: > Hi Mauro, > > Hi Mauro, > > > > > > > > Could you please test and give us a feedback? <snip> > I'll also forward you in priv the patch, as an attachment. > > > > > > Cheers, > Mauro dmesg after patch: <snip> [ 38.154324] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) [ 38.154335] Uniform CD-ROM driver Revision: 3.20 [ 38.227757] Linux video capture interface: v2.00 [ 38.300327] saa7130/34: v4l2 driver version 0.2.14 loaded [ 38.300842] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 38.300855] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 38.300863] saa7133[0]: found at 0000:04:09.0, rev: 209, irq: 17, latency: 32, mmio: 0xfdbff000 [ 38.300871] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=137,autodetected] [ 38.300879] saa7133[0]: board init: gpio is 22000 [ 38.474307] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00 [ 38.474317] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 38.474324] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff [ 38.474332] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474339] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff [ 38.474346] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474354] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474361] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474368] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474376] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474383] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474390] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474398] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474405] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474413] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.474420] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 38.494283] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] [ 38.506255] saa7133[0]: i2c scan: found device @ 0xc2 [???] [ 38.622847] tuner' 2-0061: Setting mode_mask to 0x0e [ 38.622851] tuner' 2-0061: chip found @ 0xc2 (saa7133[0]) [ 38.622855] tuner' 2-0061: tuner 0x61: Tuner type absent [ 38.622881] tuner' 2-0061: Calling set_type_addr for type=71, addr=0xff, mode=0x04, config=0x00 [ 38.622884] tuner' 2-0061: set addr for type -1 [ 38.622887] tuner' 2-0061: defining GPIO callback [ 38.622889] xc2028: Xcv2028/3028 init called! [ 38.622892] xc2028: video_dev =ffff810067c6e000 [ 38.622894] xc2028: usage count is 1 [ 38.622897] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner [ 38.622899] tuner' 2-0061: type set to Xceive XC3028 [ 38.622902] tuner' 2-0061: tv freq set to 400.00 [ 38.622906] xc2028 2-0061: xc2028_set_analog_freq called [ 38.622908] xc2028 2-0061: generic_set_freq called [ 38.622911] xc2028 2-0061: should set frequency 400000 kHz [ 38.622913] xc2028 2-0061: check_firmware called [ 38.622915] xc2028 2-0061: xc2028/3028 firmware name not set! [ 38.622918] tuner' 2-0061: saa7133[0] tuner' I2C addr 0xc2 with type 71 used for 0x0e [ 38.624519] xc2028 2-0061: xc2028_set_config called [ 38.624527] tuner' 2-0061: switching to v4l2 [ 38.624531] tuner' 2-0061: tv freq set to 400.00 [ 38.624534] xc2028 2-0061: xc2028_set_analog_freq called [ 38.624536] xc2028 2-0061: generic_set_freq called [ 38.624539] xc2028 2-0061: should set frequency 400000 kHz [ 38.624541] xc2028 2-0061: check_firmware called [ 38.624543] xc2028 2-0061: load_all_firmwares called [ 38.624546] xc2028 2-0061: Reading firmware xc3028-v27.fw [ 38.660607] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 38.660619] xc2028 2-0061: Reading firmware type BASE F8MHZ (3), id 0, size=8718. [ 38.660634] xc2028 2-0061: Reading firmware type BASE F8MHZ MTS (7), id 0, size=8712. [ 38.660647] xc2028 2-0061: Reading firmware type BASE FM (401), id 0, size=8562. [ 38.660661] xc2028 2-0061: Reading firmware type BASE FM INPUT1 (c01), id 0, size=8576. [ 38.660675] xc2028 2-0061: Reading firmware type BASE (1), id 0, size=8706. [ 38.660688] xc2028 2-0061: Reading firmware type BASE MTS (5), id 0, size=8682. [ 38.660697] xc2028 2-0061: Reading firmware type (0), id 100000007, size=161. [ 38.660700] xc2028 2-0061: Reading firmware type MTS (4), id 100000007, size=169. [ 38.660704] xc2028 2-0061: Reading firmware type (0), id 200000007, size=161. [ 38.660708] xc2028 2-0061: Reading firmware type MTS (4), id 200000007, size=169. [ 38.660711] xc2028 2-0061: Reading firmware type (0), id 400000007, size=161. [ 38.660715] xc2028 2-0061: Reading firmware type MTS (4), id 400000007, size=169. [ 38.660719] xc2028 2-0061: Reading firmware type (0), id 800000007, size=161. [ 38.660723] xc2028 2-0061: Reading firmware type MTS (4), id 800000007, size=169. [ 38.660729] xc2028 2-0061: Reading firmware type (0), id 3000000e0, size=161. [ 38.660732] xc2028 2-0061: Reading firmware type MTS (4), id 3000000e0, size=169. [ 38.660736] xc2028 2-0061: Reading firmware type (0), id c000000e0, size=161. [ 38.660740] xc2028 2-0061: Reading firmware type MTS (4), id c000000e0, size=169. [ 38.660743] xc2028 2-0061: Reading firmware type (0), id 200000, size=161. [ 38.660747] xc2028 2-0061: Reading firmware type MTS (4), id 200000, size=169. [ 38.660750] xc2028 2-0061: Reading firmware type (0), id 4000000, size=161. [ 38.660754] xc2028 2-0061: Reading firmware type MTS (4), id 4000000, size=169. [ 38.660757] xc2028 2-0061: Reading firmware type D2633 DTV6 ATSC (10030), id 0, size=149. [ 38.660761] xc2028 2-0061: Reading firmware type D2620 DTV6 QAM (68), id 0, size=149. [ 38.660766] xc2028 2-0061: Reading firmware type D2633 DTV6 QAM (70), id 0, size=149. [ 38.660770] xc2028 2-0061: Reading firmware type D2620 DTV7 (88), id 0, size=149. [ 38.660774] xc2028 2-0061: Reading firmware type D2633 DTV7 (90), id 0, size=149. [ 38.660778] xc2028 2-0061: Reading firmware type D2620 DTV78 (108), id 0, size=149. [ 38.660781] xc2028 2-0061: Reading firmware type D2633 DTV78 (110), id 0, size=149. [ 38.660785] xc2028 2-0061: Reading firmware type D2620 DTV8 (208), id 0, size=149. [ 38.660790] xc2028 2-0061: Reading firmware type D2633 DTV8 (210), id 0, size=149. [ 38.660793] xc2028 2-0061: Reading firmware type FM (400), id 0, size=135. [ 38.660797] xc2028 2-0061: Reading firmware type (0), id 10, size=161. [ 38.660800] xc2028 2-0061: Reading firmware type MTS (4), id 10, size=169. [ 38.660803] xc2028 2-0061: Reading firmware type (0), id 1000400000, size=169. [ 38.660809] xc2028 2-0061: Reading firmware type (0), id c00400000, size=161. [ 38.660812] xc2028 2-0061: Reading firmware type (0), id 800000, size=161. [ 38.660816] xc2028 2-0061: Reading firmware type (0), id 8000, size=161. [ 38.660819] xc2028 2-0061: Reading firmware type LCD (1000), id 8000, size=161. [ 38.660823] xc2028 2-0061: Reading firmware type LCD NOGD (3000), id 8000, size=161. [ 38.660827] xc2028 2-0061: Reading firmware type MTS (4), id 8000, size=169. [ 38.660831] xc2028 2-0061: Reading firmware type (0), id b700, size=161. [ 38.660834] xc2028 2-0061: Reading firmware type LCD (1000), id b700, size=161. [ 38.660838] xc2028 2-0061: Reading firmware type LCD NOGD (3000), id b700, size=161. [ 38.660842] xc2028 2-0061: Reading firmware type (0), id 2000, size=161. [ 38.660845] xc2028 2-0061: Reading firmware type MTS (4), id b700, size=169. [ 38.660849] xc2028 2-0061: Reading firmware type MTS LCD (1004), id b700, size=169. [ 38.660852] xc2028 2-0061: Reading firmware type MTS LCD NOGD (3004), id b700, size=169. [ 38.660857] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3280 (60000000), id 0, size=192. [ 38.660861] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3300 (60000000), id 0, size=192. [ 38.660866] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3440 (60000000), id 0, size=192. [ 38.660871] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3460 (60000000), id 0, size=192. [ 38.660875] xc2028 2-0061: Reading firmware type DTV6 ATSC OREN36 SCODE HAS_IF_3800 (60210020), id 0, size=192. [ 38.660881] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4000 (60000000), id 0, size=192. [ 38.660885] xc2028 2-0061: Reading firmware type DTV6 ATSC TOYOTA388 SCODE HAS_IF_4080 (60410020), id 0, size=192. [ 38.660891] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4200 (60000000), id 0, size=192. [ 38.660897] xc2028 2-0061: Reading firmware type MONO SCODE HAS_IF_4320 (60008000), id 8000, size=192. [ 38.660902] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4450 (60000000), id 0, size=192. [ 38.660907] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4500 (60000000), id 2000, size=192. [ 38.660912] xc2028 2-0061: Reading firmware type LCD NOGD IF SCODE HAS_IF_4600 (60023000), id 8000, size=192. [ 38.660917] xc2028 2-0061: Reading firmware type DTV78 ZARLINK456 SCODE HAS_IF_4760 (62000100), id 0, size=192. [ 38.660923] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4940 (60000000), id 0, size=192. [ 38.660927] xc2028 2-0061: Reading firmware type DTV7 ZARLINK456 SCODE HAS_IF_5260 (62000080), id 0, size=192. [ 38.660933] xc2028 2-0061: Reading firmware type MONO SCODE HAS_IF_5320 (60008000), id 800000007, size=192. [ 38.660938] xc2028 2-0061: Reading firmware type DTV8 CHINA SCODE HAS_IF_5400 (64000200), id 0, size=192. [ 38.660943] xc2028 2-0061: Reading firmware type DTV6 ATSC OREN538 SCODE HAS_IF_5580 (60110020), id 0, size=192. [ 38.660949] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5640 (60000000), id 200000007, size=192. [ 38.660954] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5740 (60000000), id 800000007, size=192. [ 38.660959] xc2028 2-0061: Reading firmware type DTV7 DIBCOM52 SCODE HAS_IF_5900 (61000080), id 0, size=192. [ 38.660964] xc2028 2-0061: Reading firmware type MONO SCODE HAS_IF_6000 (60008000), id 10, size=192. [ 38.660969] xc2028 2-0061: Reading firmware type DTV6 QAM F6MHZ SCODE HAS_IF_6200 (68000060), id 0, size=192. [ 38.660974] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6240 (60000000), id 10, size=192. [ 38.660979] xc2028 2-0061: Reading firmware type MONO SCODE HAS_IF_6320 (60008000), id 200000, size=192. [ 38.660984] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6340 (60000000), id 200000, size=192. [ 38.660989] xc2028 2-0061: Reading firmware type MONO SCODE HAS_IF_6500 (60008000), id 4000000, size=192. [ 38.660994] xc2028 2-0061: Reading firmware type DTV6 ATSC ATI638 SCODE HAS_IF_6580 (60090020), id 0, size=192. [ 38.660999] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6600 (60000000), id 3000000e0, size=192. [ 38.661006] xc2028 2-0061: Reading firmware type MONO SCODE HAS_IF_6680 (60008000), id 3000000e0, size=192. [ 38.661012] xc2028 2-0061: Reading firmware type DTV6 ATSC TOYOTA794 SCODE HAS_IF_8140 (60810020), id 0, size=192. [ 38.661017] xc2028 2-0061: Reading firmware type SCODE HAS_IF_8200 (60000000), id 0, size=192. [ 38.661033] xc2028 2-0061: Firmware files loaded. [ 38.661036] xc2028 2-0061: checking firmware, user requested type=F8MHZ MTS (6), id 00000000000000ff, scode_tbl (0), scode_nr 0 [ 38.661051] xc2028 2-0061: load_firmware called [ 38.661053] xc2028 2-0061: seek_firmware called, want type=BASE F8MHZ MTS (7), id 0000000000000000. [ 38.661058] xc2028 2-0061: Found firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 38.661062] xc2028 2-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 51.146769] xc2028 2-0061: Load init1 firmware, if exists [ 51.146771] xc2028 2-0061: load_firmware called [ 51.146773] xc2028 2-0061: seek_firmware called, want type=BASE INIT1 F8MHZ MTS (4007), id 0000000000000000. [ 51.146779] xc2028 2-0061: Can't find firmware for type=BASE INIT1 F8MHZ MTS (4007), id 0000000000000000. [ 51.146783] xc2028 2-0061: load_firmware called [ 51.146785] xc2028 2-0061: seek_firmware called, want type=BASE INIT1 MTS (4005), id 0000000000000000. [ 51.146790] xc2028 2-0061: Can't find firmware for type=BASE INIT1 MTS (4005), id 0000000000000000. [ 51.146794] xc2028 2-0061: load_firmware called [ 51.146796] xc2028 2-0061: seek_firmware called, want type=F8MHZ MTS (6), id 00000000000000ff. [ 51.146801] xc2028 2-0061: Selecting best matching firmware (3 bits) for type=MTS (4), id 00000000000000ff: [ 51.146805] xc2028 2-0061: Found firmware for type=MTS (4), id 0000000100000007. [ 51.146808] xc2028 2-0061: Loading firmware for type=MTS (4), id 0000000100000007. [ 51.422344] xc2028 2-0061: Trying to load scode 0 [ 51.422346] xc2028 2-0061: load_scode called [ 51.422348] xc2028 2-0061: seek_firmware called, want type=F8MHZ MTS SCODE (20000006), id 0000000100000007. [ 51.422354] xc2028 2-0061: Can't find firmware for type=MTS SCODE (20000004), id 0000000100000007. [ 51.422359] xc2028 2-0061: xc2028_get_reg 0004 called [ 51.434333] xc2028 2-0061: xc2028_get_reg 0008 called [ 51.446308] xc2028 2-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 [ 51.634024] xc2028 2-0061: divisor= 00 00 64 00 (freq=400.000) [ 51.634030] tuner' 2-0061: tv freq set to 400.00 [ 51.634034] xc2028 2-0061: xc2028_set_analog_freq called [ 51.634036] xc2028 2-0061: generic_set_freq called [ 51.634039] xc2028 2-0061: should set frequency 400000 kHz [ 51.634042] xc2028 2-0061: check_firmware called [ 51.634044] xc2028 2-0061: checking firmware, user requested type=F8MHZ MTS (6), id 00000000000000ff, scode_tbl (0), scode_nr 0 [ 51.634048] xc2028 2-0061: BASE firmware not changed. [ 51.634051] xc2028 2-0061: Std-specific firmware already loaded. [ 51.634053] xc2028 2-0061: SCODE firmware already loaded. [ 51.634055] xc2028 2-0061: xc2028_get_reg 0004 called [ 51.645999] xc2028 2-0061: xc2028_get_reg 0008 called [ 51.657981] xc2028 2-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 [ 51.845692] xc2028 2-0061: divisor= 00 00 64 00 (freq=400.000) [ 51.845932] saa7133[0]: registered device video0 [v4l2] [ 51.845959] saa7133[0]: registered device vbi0 [ 51.845978] saa7133[0]: registered device radio0 [ 51.846087] tuner' 2-0061: Cmd TUNER_SET_STANDBY accepted for analog TV [ 51.846090] xc2028 2-0061: xc2028_sleep called [ 51.874893] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 51.874900] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 51.875102] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 51.907495] saa7134 ALSA driver for DMA sound loaded [ 51.907531] saa7133[0]/alsa: saa7133[0] at 0xfdbff000 irq 17 registered as card -2 [ 52.596702] loop: module loaded [ 52.617197] lp0: using parport0 (interrupt-driven). [ 52.725710] Adding 9767512k swap on /dev/sda3. Priority:-1 extents:1 across:9767512k [ 53.058319] EXT3 FS on sda4, internal journal [ 53.841761] kjournald starting. Commit interval 5 seconds [ 53.841994] EXT3 FS on sda2, internal journal [ 53.841998] EXT3-fs: mounted filesystem with ordered data mode. [ 54.615733] No dock devices found. [ 54.688958] input: Power Button (FF) as /class/input/input5 [ 54.688980] ACPI: Power Button (FF) [PWRF] [ 54.689023] input: Power Button (CM) as /class/input/input6 [ 54.689038] ACPI: Power Button (CM) [PWRB] [ 54.959381] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ processors (version 2.00.00) [ 54.959700] powernow-k8: MP systems not supported by PSB BIOS structure [ 54.960473] powernow-k8: MP systems not supported by PSB BIOS structure [ 55.825459] ppdev: user-space parallel port driver [ 55.951199] audit(1206060252.433:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5058 profile="/usr/sbin/cupsd" [ 56.234818] Failure registering capabilities with primary security module. [ 56.455612] Bluetooth: Core ver 2.11 [ 56.455751] NET: Registered protocol family 31 [ 56.455754] Bluetooth: HCI device and connection manager initialized [ 56.455758] Bluetooth: HCI socket layer initialized [ 56.469025] Bluetooth: L2CAP ver 2.8 [ 56.469030] Bluetooth: L2CAP socket layer initialized [ 56.517657] Bluetooth: RFCOMM socket layer initialized [ 56.517944] Bluetooth: RFCOMM TTY layer initialized [ 56.517946] Bluetooth: RFCOMM ver 1.8 [ 60.884775] NET: Registered protocol family 17 [ 63.154539] NET: Registered protocol family 10 [ 63.154714] lo: Disabled Privacy Extensions [ 73.281534] eth0: no IPv6 routers present Info: - have /dev/video0 - tvtime - no signal - have soundcard Regards, Tim _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
