In message <45FAB175.6090803@xxxxxxxxxxxxx>, Steven Toth wrote: >Darron Broad wrote: > >Has anyone had a chance to try the stoth/hvr4000 tree after the recent >fixes? It's certainly going through the correct motioned for tuning now. >(I don't have a feed available for testing right now). > >Remember, DiSEqC is not implemented. Hi Steve. I have more news to report. I have hacked some extra args to the kromtek multiproto szap and am able to tune to a DVB-S2 channel. However, I can't actually tune to a channel I am able to view, just get a lock on, so someone else must confirm that it actually streams correctly. An updated szap is here: http://dev.kewl.org/tmp/hvr4000/szap2.tgz An example use: # szap2 -x -a 0 -r -c ./Astra-28.2E.conf -t 2 -e 3 -m q "Sky HD Promo" reading channels from file './Astra-28.2E.conf' zapping to 1 'Sky HD Promo': sat 0, frequency = 12324 MHz V, symbolrate 28250000, vpid = 0x0200, apid = 0x0280 sid = 0x0ed9 (fec = 64, mod = 2) Querying info .. Delivery system=DVB-S2 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' FE_DISEQC_SEND_MASTER_CMD failed: Operation not supported FE_DISEQC_SEND_BURST failed: Operation not supported ----------------------------------> Using 'Conexant CX24116 DVB-S2' DVB-S2 do_tune: API version=2, delivery system = 2 do_tune: Frequency = 1724000, Srate = 28250000 (DVB-S2) do_tune: Frequency = 1724000, Srate = 28250000 (SET_PARAMS) status 1f | signal 008c | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK The args to make the hvr4000 work are: -f : fec (1=1/2, 2=2/3, 3=3/4, 4=4/5, 5=5/6, 6=6/7, 8=8/9, 0=AUTO) -m : mod (q=QPSK, 8=8PSK) If anyone can confirm that it works on FTA DVB-S2 that would be useful. cya darron -- // / {:)==={ Darron Broad <darron@xxxxxxxx> \\ \ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
