On Tuesday 13 March 2007 14:34, Steven Toth wrote: > Hi, > > I've created a new tree based on the current mainline v4l/dvb tree, > Manu's multiproto patches and the HVR400 specific patches. It can be > found here http://linuxtv.org/hg/~stoth/hvr4000 > > I don't have any immediate hardware available for test, so your mileage > may vary. > > If you'd like to spend the time testing then I'll happy take > feedback/bugs via this ML. > > Looking at the patch description: > > 1. DVB-T is not working, pending a GPIO change > 2. DiSEqC is not working > > Regular DVB-S and DVB-S2 should work fine. Remember you'll need apps > that support the multiproto API's to use the S2 functionality. > > Lastly, see my posting to the ML last week for instructions on obtaining > the firmware. Oh goody, we're getting there. When unloading the modules, I get: isl6421 6656 4294967295 cx24116 17664 4294967295 Forcing there removal does not seem to harm the system. I'm not too sure whether it is handling the card correctly, although it does see it Mar 13 20:31:49 eth5 kernel: cx2388x alsa driver version 0.0.6 loaded Mar 13 20:31:49 eth5 kernel: PCI: Enabling device 0000:02:0a.1 (0110 -> 0112) Mar 13 20:31:49 eth5 kernel: ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 22 (level, low) -> IRQ 217 Mar 13 20:31:49 eth5 kernel: cx88[0]/1: CX88x/0: ALSA support for cx2388x boards Mar 13 20:31:49 eth5 kernel: cx2388x dvb driver version 0.0.6 loaded Mar 13 20:31:49 eth5 kernel: cx8802_register_driver() ->registering driver type=dvb access=shared Mar 13 20:31:49 eth5 kernel: CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=57] Mar 13 20:31:49 eth5 kernel: cx88[0]/2: cx2388x based dvb card Mar 13 20:31:49 eth5 kernel: cx24116: cx24116_attach Mar 13 20:31:49 eth5 kernel: DVB: registering new adapter (cx88[0]). Mar 13 20:31:49 eth5 kernel: DVB: registering frontend 1 (Conexant CX24116/CX24118)... Mar 13 20:31:50 eth5 kernel: cx2388x blackbird driver version 0.0.6 loaded Mar 13 20:31:50 eth5 kernel: cx8802_register_driver() ->registering driver type=blackbird access=shared Mar 13 20:31:50 eth5 kernel: CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=57] Mar 13 20:31:50 eth5 kernel: cx8802_register_driver() ->probe failed err = -19 Other than that, I still cannot get DVB-S or SVB-S2 to work. That could be because my knowledge of about the sat stuff is sadly lacking. Bob _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
