Bob wrote:
On Tuesday 13 March 2007 14:34, Steven Toth wrote:
Hi,
I've created a new tree based on the current mainline v4l/dvb tree,
Manu's multiproto patches and the HVR400 specific patches. It can be
found here http://linuxtv.org/hg/~stoth/hvr4000
I don't have any immediate hardware available for test, so your mileage
may vary.
If you'd like to spend the time testing then I'll happy take
feedback/bugs via this ML.
Looking at the patch description:
1. DVB-T is not working, pending a GPIO change
2. DiSEqC is not working
Regular DVB-S and DVB-S2 should work fine. Remember you'll need apps
that support the multiproto API's to use the S2 functionality.
Lastly, see my posting to the ML last week for instructions on obtaining
the firmware.
Oh goody, we're getting there.
When unloading the modules, I get:
isl6421 6656 4294967295
cx24116 17664 4294967295
Forcing there removal does not seem to harm the system.
I'm not too sure whether it is handling the card correctly, although
it does see it
Mar 13 20:31:49 eth5 kernel: cx2388x alsa driver version 0.0.6 loaded
Mar 13 20:31:49 eth5 kernel: PCI: Enabling device 0000:02:0a.1 (0110 -> 0112)
Mar 13 20:31:49 eth5 kernel: ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 22 (level, low) -> IRQ 217
Mar 13 20:31:49 eth5 kernel: cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
Mar 13 20:31:49 eth5 kernel: cx2388x dvb driver version 0.0.6 loaded
Mar 13 20:31:49 eth5 kernel: cx8802_register_driver() ->registering driver type=dvb access=shared
Mar 13 20:31:49 eth5 kernel: CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=57]
Mar 13 20:31:49 eth5 kernel: cx88[0]/2: cx2388x based dvb card
Mar 13 20:31:49 eth5 kernel: cx24116: cx24116_attach
Mar 13 20:31:49 eth5 kernel: DVB: registering new adapter (cx88[0]).
Mar 13 20:31:49 eth5 kernel: DVB: registering frontend 1 (Conexant CX24116/CX24118)...
Mar 13 20:31:50 eth5 kernel: cx2388x blackbird driver version 0.0.6 loaded
Mar 13 20:31:50 eth5 kernel: cx8802_register_driver() ->registering driver type=blackbird access=shared
Mar 13 20:31:50 eth5 kernel: CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=57]
Mar 13 20:31:50 eth5 kernel: cx8802_register_driver() ->probe failed err = -19
Other than that, I still cannot get DVB-S or SVB-S2 to work.
That could be because my knowledge of about the sat stuff
is sadly lacking.
Bob
Thanks for the feedback.
Gregoire reported an issue via IRC today. It looks like the HVR4000
demod driver never receives the set_params call, to actually tune. I
think this is probably a bug in dvb_core - manu's patches.
I plan to repro tomorrow, expect more progress in the next day or so.
Regards,
Steve
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
