On Saturday 17 March 2007 18:16, Darron Broad wrote: > In message <45FAB175.6090803@xxxxxxxxxxxxx>, Steven Toth wrote: > >Darron Broad wrote: > > > >Has anyone had a chance to try the stoth/hvr4000 tree after the recent > >fixes? It's certainly going through the correct motioned for tuning now. > >(I don't have a feed available for testing right now). > > > >Remember, DiSEqC is not implemented. > > Hi Steve. > > I have more news to report. > > I have hacked some extra args to the kromtek multiproto szap and am able > to tune to a DVB-S2 channel. > > However, I can't actually tune to a channel I am able to view, just > get a lock on, so someone else must confirm that it actually streams > correctly. > > An updated szap is here: > > http://dev.kewl.org/tmp/hvr4000/szap2.tgz > > An example use: > > # szap2 -x -a 0 -r -c ./Astra-28.2E.conf -t 2 -e 3 -m q "Sky HD Promo" > reading channels from file './Astra-28.2E.conf' > zapping to 1 'Sky HD Promo': > sat 0, frequency = 12324 MHz V, symbolrate 28250000, vpid = 0x0200, apid = > 0x0280 sid = 0x0ed9 (fec = 64, mod = 2) Querying info .. Delivery > system=DVB-S2 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > FE_DISEQC_SEND_MASTER_CMD failed: Operation not supported > FE_DISEQC_SEND_BURST failed: Operation not supported > ----------------------------------> Using 'Conexant CX24116 DVB-S2' DVB-S2 > do_tune: API version=2, delivery system = 2 > do_tune: Frequency = 1724000, Srate = 28250000 (DVB-S2) > do_tune: Frequency = 1724000, Srate = 28250000 (SET_PARAMS) > > > status 1f | signal 008c | snr 0000 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > > The args to make the hvr4000 work are: > > -f : fec (1=1/2, 2=2/3, 3=3/4, 4=4/5, 5=5/6, 6=6/7, 8=8/9, > 0=AUTO) -m : mod (q=QPSK, 8=8PSK) > > If anyone can confirm that it works on FTA DVB-S2 that would be useful. Hi Darron I connected to the BBC HD feed: BBC HD:10847:v:0:22000:0:2320:6940 With the following results... eth5:~/szap2 # ./szap2 -x -a 1 -r -c ./Astra-28.2E.conf -t 2 -e 3 -m q "BBC HD" reading channels from file './Astra-28.2E.conf' zapping to 35 'BBC HD': sat 0, frequency = 10847 MHz V, symbolrate 22000000, vpid = 0x1fff, apid = 0x0910 sid = 0x1b1c (fec = 64, mod = 2) Querying info .. Delivery system=DVB-S2 using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' FE_DISEQC_SEND_MASTER_CMD failed: Invalid argument FE_DISEQC_SEND_BURST failed: Operation not supported ----------------------------------> Using 'Conexant CX24116 DVB-S2' DVB-S2 do_tune: API version=2, delivery system = 2 do_tune: Frequency = 1097000, Srate = 22000000 (DVB-S2) do_tune: Frequency = 1097000, Srate = 22000000 (SET_PARAMS) status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | Stracing on mplayer shows that it open drv0, but just sits there waiting on data to be read. The HVR4000 is adaptor 1, with a DVB-T card at 0; Bob _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
