In message <200703172027.11501.linux-dvb@xxxxxxxxxxxx>, Bob wrote:
Hello Bob.
>Hi Darron
>
>I connected to the BBC HD feed:
>BBC HD:10847:v:0:22000:0:2320:6940
>
>With the following results...
>
>eth5:~/szap2 # ./szap2 -x -a 1 -r -c ./Astra-28.2E.conf -t 2 -e 3 -m q "BBC HD"
>reading channels from file './Astra-28.2E.conf'
>zapping to 35 'BBC HD':
>sat 0, frequency = 10847 MHz V, symbolrate 22000000, vpid = 0x1fff, apid = 0x0910 sid = 0x1b1c (fec = 64, mod = 2)
>Querying info .. Delivery system=DVB-S2
>using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
>FE_DISEQC_SEND_MASTER_CMD failed: Invalid argument
>FE_DISEQC_SEND_BURST failed: Operation not supported
>----------------------------------> Using 'Conexant CX24116 DVB-S2' DVB-S2
>do_tune: API version=2, delivery system = 2
>do_tune: Frequency = 1097000, Srate = 22000000 (DVB-S2)
>do_tune: Frequency = 1097000, Srate = 22000000 (SET_PARAMS)
>
>
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>
>
>Stracing on mplayer shows that it open drv0, but just sits there waiting
>on data to be read.
>
>The HVR4000 is adaptor 1, with a DVB-T card at 0;
The problem above is that BBC HD on Astra 28.2E is DVB-S and not DVB-S2
Refer to kingofsat.net or elsewhere:
"Astra 2D (28.2E) - 10847.00 V - Txp:50 - Beam:Astra 2D DVB-S (QPSK) - 22000 5/6 - NID:2 - TID:2050"
My example was tuning to Sky on same satellite, however, as it is
encrypted there is little to see.
The only FTA DVB-S2 i was able to at least look at is on W3A yet
there is no signal, therefore someone with access to 23.5? or 19.2?
DVB-S2 can test this.
Thanks for trying.
darron
--
// /
{:)==={ Darron Broad <darron@xxxxxxxx>
\\ \
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
