On Saturday 17 March 2007 22:55, Darron Broad wrote: > In message <200703172027.11501.linux-dvb@xxxxxxxxxxxx>, Bob wrote: > > Hello Bob. > > >Hi Darron > > > >I connected to the BBC HD feed: > >BBC HD:10847:v:0:22000:0:2320:6940 > > > >With the following results... > > > >eth5:~/szap2 # ./szap2 -x -a 1 -r -c ./Astra-28.2E.conf -t 2 -e 3 -m q > > "BBC HD" reading channels from file './Astra-28.2E.conf' > >zapping to 35 'BBC HD': > >sat 0, frequency = 10847 MHz V, symbolrate 22000000, vpid = 0x1fff, apid = > > 0x0910 sid = 0x1b1c (fec = 64, mod = 2) Querying info .. Delivery > > system=DVB-S2 > >using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' > >FE_DISEQC_SEND_MASTER_CMD failed: Invalid argument > >FE_DISEQC_SEND_BURST failed: Operation not supported > >----------------------------------> Using 'Conexant CX24116 DVB-S2' DVB-S2 > >do_tune: API version=2, delivery system = 2 > >do_tune: Frequency = 1097000, Srate = 22000000 (DVB-S2) > >do_tune: Frequency = 1097000, Srate = 22000000 (SET_PARAMS) > > > > > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > >status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > > > > > >Stracing on mplayer shows that it open drv0, but just sits there waiting > >on data to be read. > > > >The HVR4000 is adaptor 1, with a DVB-T card at 0; > > The problem above is that BBC HD on Astra 28.2E is DVB-S and not DVB-S2 > > Refer to kingofsat.net or elsewhere: > > "Astra 2D (28.2E) - 10847.00 V - Txp:50 - Beam:Astra 2D DVB-S (QPSK) - > 22000 5/6 - NID:2 - TID:2050" > > My example was tuning to Sky on same satellite, however, as it is > encrypted there is little to see. > > The only FTA DVB-S2 i was able to at least look at is on W3A yet > there is no signal, therefore someone with access to 23.5? or 19.2? > DVB-S2 can test this. > > Thanks for trying. I would have thought though, that if it was DVB-S, then I would be able to view it. I also thought that HD only happened over DVB-S2? So much to learn... B _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
