Re: HVR4000 Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In message <13240.1174171445@xxxxxxxx>, Darron Broad wrote:

Steven.

Your diseqc addition introduces a new bug.

The problem occurs because you have a lookup table with fixed
command lengths and the diseqc command is:

1. omitted from the table, so is assumed to be an invalid command.
2. has a variable length so can't be added to that table.

there are two solutions, either hack it to work OR remove the table
and put the lengths in the calling functions.

in order to test diseqc i will do (2) above and determine if
it works.

cheers



>In message <20070317221756.GB23903@xxxxxxxxx>, Gregoire Favre wrote:
>
>lo
>
>>On Sat, Mar 17, 2007 at 06:05:28PM +0000, Darron Broad wrote:
>>
>>> diseqc is not implemented in the driver so whatever tools you use
>>> there will be no effect.
>>
>>Well, what does `hg log|less` says for you ?
>>
>>Here I got :
>>changeset:   5416:03afdb635ed2
>>tag:         tip
>>user:        Steven Toth <stoth@xxxxxxxxxxxxx>
>>date:        Fri Mar 16 14:37:06 2007 -0400
>>summary:     DiSEqC support via diseqc_send_master_cmd
>>
>>But as it don't seems to works here, you shall be right anyway...
>
>ok. i will check out this new development and see what happens.
>
>>> in my case, i used an external device to send the diseqc command/burst.
>>> you can try that, else wait.
>>
>>I think you are the only one who can tune to anything with this card,
>>but it's a more or less as you use some other hardware to help the
>>tuning...
>
>the external hardware selects either the band, polarity or feed with
>the driver being able to select the band using a tone.
>
>if you discover what a priority switch does you will find that
>what it does is allow a master device to control the above with
>the slave being able to tune only frequencies on the same
>band and polarity as the master.
>
>it cannot affect the integral tuner of the slave, they are independant
>in that regard.
>
>>It would be interesting to see what will happen when you only plug the
>>card and try to tune.
>
>if i do that it works, but can't select a feed with diseqc. it
>can control a universal LNB feed alone.
>
>>From the mail of "Bob" I can see he also can't tune (which is the
>>reason he don't receive anything in mplayer).
>
>this is not true, Bob is able to tune, and if you are not able
>to tune then you have some other problem.
>
>l8r
>
>--
>
> // /
>{:)==={ Darron Broad <darron@xxxxxxxx>
> \\ \ 
>
>

--

 // /
{:)==={ Darron Broad <darron@xxxxxxxx>
 \\ \ 


_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux