On Thu, 2005-09-08 at 13:38 +0200, Christian Kaenzig wrote: > Le Jeudi, 8 Septembre 2005 11:59, Richard ngn a ?crit : > > I am currently using DVBstream to multicast an entire > > mux from a DVB-t card as one transport stream. It > > works fine however, it is causing some traffic > > problems due to its 20+Mbits size. > > > > >From what I have read, we need to demux the big TS > > > > stream by PID and then remux it into smaller TS > > streams. > > I have written a simple streaming software in Python which can stream > different pids to different hosts. It reads the ts stream from dvr0 and uses > ts2ps to filter the pids (one instance of ts2ps per stream being sent). > > The problem is that ts2ps is quite buggy (and my own code too, I admit :-p) > which leads to having to restart my program quite often and it is therefore > not really usable (at least not practical at all). > > > Before I got going, I just wanted to check this wasn't > > already available somewhere else....? > > My needs may not be exactly the same as yours, but I'd like to hear of some > software able to remux ts, ps, or mpeg streams, eather from a sigle ts or > separate audio and video streams. As I am writing, I am thinking of transcode > which might be able to do that. I'll have to check that sometime. VLC allready does this, and has done for ages: http://www.videolan.org/doc/streaming-howto/en/ch09.html Sigmund > > Christian > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
