Hi Jacques, I have joined the wvdial output. Thanks jc 2009/12/3 Jacques Goldberg <Jacques.Goldberg@xxxxxxx>: > Jean-Christophe, > > > 1-That you hear no sound is normal: slmodem does not support sound. > > > 2-The wvdial output would definitely help, Here is how to get it. With > computers, as you certainly know, there always exist more than one way to do > something, Try this one: > > > > Open a new command window (terminal, console) > > Open an editor in that window, > > Go to the wvdial window, launch wvdial and let it terminate (or stop doing > anything, which is the case when the connection works well). > > Bring your mouse cursor to the beginning of the part of the screen which > you wish to copy. > > Press the left button and move the mouse to the end of the part of the > screen which etc... > > What you want to copy is black. > > Release the left button. > > Move the cursor to the editor window. > > Press the middle button of the mouse: the text is copied in the editor > window. > > Save the editor window with any name such as wvdial.output.txt (try not > to forget txt) > > Exit the editor > > Attach the file to your mail. > > > Jacques > > > > > Jean-Christophe Etienne wrote: > >> Hi Marv, >> >> >> 2009/12/3 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >> >>> >>> Jean >>> >>> RE: > As I wrote, I 'm still using the 2.9.9 version >>> From http://linmodems.technion.ac.il/packages/smartlink/ download the >>> SLMODEMD.gcc4.1.tar.gz >>> Under Linux unpack it with: >>> tar zxf SL*.tar.gz >>> Move into the new folder >>> cd SLMODEMD.gcc4.1 >>> Look around >>> ls >>> >>> Acquire root status >>> su root >>> If necessary, kill any running slmodemd with: >>> /etc/init.d/sl-modem-daemon stop >>> cp slmodemd /usr/sbin/slmodemd >>> >>> Check the version >>> slmodemd --version >>> if should now show 2.9.11 >>> >> >> OK >> >> >>> >>> Activate the modem: >>> /etc/init.d/sl-modem-daemon start >>> >>> You should try an ordinary dialout before testing fax, setting up the >>> /etc/wvdial.conf file as previously described, >>> AND adding a line >>> Carrier Check = no >>> to /etc/wvdial.conf >>> >> >> DONE >> >> But, when I try : >> # wvdial >> >> I get systematically NO DIALTONE (even I am connected on the analogic >> line) and Icannot ear any modem sounds. >> >> I don't know how join to you the result of the command wvdial in a >> file but I copy here the wvdial.conf file if could help : >> >> [Dialer Defaults] >> Init1 = ATZ >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> Modem Type = Analog Modem >> ISDN = 0 >> New PPPD = yes >> Phone = 0860905019 >> Modem = /dev/ttySL0 >> Username = foo >> Carrier Check = no >> Password = toto >> Baud = 460800 >> >> >> >> Thanks >> >> Jean-christophe >> >> >> >>> >>> MarvS >>> >>> >>> >>> On Wed, Dec 2, 2009 at 3:03 PM, Jean-Christophe Etienne >>> <jc2.etienne@xxxxxxxxx> wrote: >>> >>>> >>>> Marv, >>>> >>>> As I wrote, I 'm still using the 2.9.9 version >>>> (I don't know how installing the new version ...) >>>> >>>> Anyway, I did what you ask (connected to an analogic line) : >>>> >>>> wvdial >> >>>> (apparently the modem is initialized at 460 800 ?) >>>> >>>> I received an error : >>>> >>>> ATDT0860905019 >>>> NO CARRIER >>>> ERROR >>>> --> No Carrier ! Trying again. >>>> >>>> etc... >>>> etc.. >>>> >>>> >>>> 2009/12/2 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >>>> >>>>> >>>>> Jean, >>>>> >>>>> Once there is the modem activation with: /dev/ttySL0 -> /dev/pts/0 >>>>> Leave slmodemd running and open a 2nd console or TAB to to the testing. >>>>> The modem should be found by root command >>>>> # wvdialconf >>>>> >>>>> Then to prepare for a dialout >>>>> # gedit /etc/wvdial.conf >>>>> putting in your personal information and removing the symbols < > ; >>>>> Try a dialout with: >>>>> # wvdial >>>>> >>>>> Note that the driver occassionally dies. Do >>>>> Ctrl-C >>>>> to kill slmodemd. Unload the driver >>>>> # modprobe -r snd-intelx0m >>>>> reload >>>>> # modprobe snd-intelx0m >>>>> >>>>> and again activate the modem. >>>>> >>>>> MarvS >>>>> >>>>> >>>>> >>>>> >>>>> Separately, I'll send you some info on fax usage. >>>>> >>>>> >>>>> >>>>> On Wed, Dec 2, 2009 at 1:11 PM, Jean-Christophe Etienne >>>>> <jc2.etienne@xxxxxxxxx> wrote: >>>>> >>>>>> >>>>>> MarvS, >>>>>> >>>>>> >>>>>> 2009/12/1 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >>>>>> >>>>>>> >>>>>>> Jean >>>>>>> >>>>>>> The sl-modem-daemon package you have installed is doing the modem >>>>>>> setup, as revealed by the >>>>>>> /dev/ttySL0 -> /dev/pts/0 >>>>>>> >>>>>>> But set your country code properly with: >>>>>>> $ sudo gedit /etc/default/sl-modem-daemon >>>>>>> replacing the default USA with FRANCE. Then do >>>>>>> >>>>>> >>>>>> Was already configured with FRANCE >>>>>> >>>>>> >>>>>>> >>>>>>> # /etc/init.d/ sl-modem-daemon stop >>>>>>> to free up the slmodemd helper. >>>>>>> >>>>>>> Check its version with >>>>>>> # slmodemd --version >>>>>>> which should report 2.9.11 as contrasted to 2.9.9 >>>>>>> >>>>>> >>>>>> OK >>>>>> >>>>>> >>>>>>> >>>>>>> If not 2.9.11 >>>>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. >>>>>>> Unpack >>>>>>> under Linux with: >>>>>>> $ tar zxf SLMODEMD.gcc4.1.tar.gz >>>>>>> and read instructions therein, to replace your current >>>>>>> >>>>>> >>>>>> (following instructions until line 69 from README file) >>>>>> >>>>>> I have installed the Kernel source package but, then ... sorry I am >>>>>> stuck (beginner) >>>>>> - Afficher le texte des messages précédents - >>>>>> >>>>>> >>>>>>> >>>>>>> /usr/sbin/slmodemd with the current 2.9.11 version >>>>>>> again check with: >>>>>>> # slmodemd --version >>>>>>> for a 2.9.11 output >>>>>>> >>>>>>> Then activate the modem with: >>>>>>> # /etc/init.d/ sl-modem-daemon start >>>>>>> which is not automaticallly on bootup, >>>>>>> >>>>>>> >>>>>>> After modem activation, the modem should be detected by >>>>>>> # wvdialconf. >>>>>>> >>>>>>> If so edit in your dialout info with >>>>>>> # gedit /etc/wvdial.conf >>>>>>> which deleting the symbols < > ; >>>>>>> This step needn't be repeated. >>>>>>> >>>>>>> Then try a dialout with; >>>>>>> # wvdial >>>>>>> >>>>>>> Note that this driver occassionally dies when loaded. >>>>>>> it can be refreshed with: >>>>>>> >>>>>>> # /etc/init.d/ sl-modem-daemon restart >>>>>>> followed again by the >>>>>>> # wvdial >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> >>>>>>> >>>>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>> the package >>>>>>> Subsequently the modem should be found b be found by >>>>>>> .tar.gz having a compiled slmodemd. Unpack under Linux with: >>>>>>> $ tar zxf SLMODEMD.gcc4.1.tar.gz >>>>>>> and read instructions therein. But briefly, the modem is setup with >>>>>>> command: >>>>>>> slmodemd -c YOUR_COUNTRY --alsa modem:1 >>>>>>> reporting dynamic creation of ports: >>>>>>> /dev/ttySL0 --> /dev/pts/N , with N some number >>>>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow >>>>>>> through guidance. >>>>>>> >>>>>>> >>>>>>> Subsequently the modem should be found b be found by >>>>>>> >>>>>>> >>>>>>> On Mon, Nov 30, 2009 at 2:57 AM, Jean-Christophe Etienne >>>>>>> <jc2.etienne@xxxxxxxxx> wrote: >>>>>>> >>>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> After few hours trying to make functioning my first modem (in the >>>>>>>> purpose to work with Hylafax) with my first Linux installation, I >>>>>>>> ask >>>>>>>> for help. I know with a an integrated modem is more difficult >>>>>>>> (impossible with this one ?). The modem seems to respond but I >>>>>>>> cannot >>>>>>>> use it and I could not ear any sounds. May be somebody could help me >>>>>>>> in this process. Thanks in advance. >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> Etienne >>>>>>>> >>>>>>>> >>>>>> >>>>>> Thanks in advance >>>>>> >>>>>> 2009/12/1 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >>>>>> >>>>>>> >>>>>>> Jean >>>>>>> >>>>>>> The sl-modem-daemon package you have installed is doing the modem >>>>>>> setup, as revealed by the >>>>>>> /dev/ttySL0 -> /dev/pts/0 >>>>>>> >>>>>>> But set your country code properly with: >>>>>>> $ sudo gedit /etc/default/sl-modem-daemon >>>>>>> replacing the default USA with FRANCE. Then do >>>>>>> # /etc/init.d/ sl-modem-daemon stop >>>>>>> to free up the slmodemd helper. >>>>>>> >>>>>>> Check its version with >>>>>>> # slmodemd --version >>>>>>> which should report 2.9.11 as contrasted to 2.9.9 >>>>>>> >>>>>>> If not 2.9.11 >>>>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. >>>>>>> Unpack >>>>>>> under Linux with: >>>>>>> $ tar zxf SLMODEMD.gcc4.1.tar.gz >>>>>>> and read instructions therein, to replace your current >>>>>>> /usr/sbin/slmodemd with the current 2.9.11 version >>>>>>> again check with: >>>>>>> # slmodemd --version >>>>>>> for a 2.9.11 output >>>>>>> >>>>>>> Then activate the modem with: >>>>>>> # /etc/init.d/ sl-modem-daemon start >>>>>>> which is not automaticallly on bootup, >>>>>>> >>>>>>> >>>>>>> After modem activation, the modem should be detected by >>>>>>> # wvdialconf. >>>>>>> >>>>>>> If so edit in your dialout info with >>>>>>> # gedit /etc/wvdial.conf >>>>>>> which deleting the symbols < > ; >>>>>>> This step needn't be repeated. >>>>>>> >>>>>>> Then try a dialout with; >>>>>>> # wvdial >>>>>>> >>>>>>> Note that this driver occassionally dies when loaded. >>>>>>> it can be refreshed with: >>>>>>> >>>>>>> # /etc/init.d/ sl-modem-daemon restart >>>>>>> followed again by the >>>>>>> # wvdial >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> >>>>>>> >>>>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>> the package >>>>>>> Subsequently the modem should be found b be found by >>>>>>> .tar.gz having a compiled slmodemd. Unpack under Linux with: >>>>>>> $ tar zxf SLMODEMD.gcc4.1.tar.gz >>>>>>> and read instructions therein. But briefly, the modem is setup with >>>>>>> command: >>>>>>> slmodemd -c YOUR_COUNTRY --alsa modem:1 >>>>>>> reporting dynamic creation of ports: >>>>>>> /dev/ttySL0 --> /dev/pts/N , with N some number >>>>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow >>>>>>> through guidance. >>>>>>> >>>>>>> >>>>>>> Subsequently the modem should be found b be found by >>>>>>> >>>>>>> >>>>>>> On Mon, Nov 30, 2009 at 2:57 AM, Jean-Christophe Etienne >>>>>>> <jc2.etienne@xxxxxxxxx> wrote: >>>>>>> >>>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> After few hours trying to make functioning my first modem (in the >>>>>>>> purpose to work with Hylafax) with my first Linux installation, I >>>>>>>> ask >>>>>>>> for help. I know with a an integrated modem is more difficult >>>>>>>> (impossible with this one ?). The modem seems to respond but I >>>>>>>> cannot >>>>>>>> use it and I could not ear any sounds. May be somebody could help me >>>>>>>> in this process. Thanks in advance. >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> Etienne >>>>>>>> >>>>>>>> > >
LCNPP01:~# wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT0860905019 --> Waiting for carrier. ATDT0860905019 And finally, stays in that state until I disconnect the line.
