Dear MarvS! There is no external modem. The notebook is a Fujitsu-siemens Amilo Si1848 with it's internal modem. And I've problems in windows xp too. In the past it've worked, now I can't send a fax... Thank you for the help! Kodmen Marvin Stodolsky írta: > Kodmen > > Re: ID 0425:f102 Motorola Semiconductors HK, Ltd > If this is an external USB modem, we don't know which drivers are > appropriate. See the Softmodem.txt about getting diagnostic > information about it under Microsoft, Including the driver information > from the Driver Details TAB > > # slmodemd -c HUNGARY --alsa hw:0,6 > is the activation command appropriate to your internal modem: > Audio device: Intel Corporation 82801G " > CLASS=0403 > PCIDEV=8086:27d8 > SUBSYS=1734:10cd > IRQ=21 > HDA=8086:27d8 > SOFT=8086:27d8.HDA > SLMODEMD_DEVICE=hw:0,6 > Driver=snd-hda-intel > --------- > which houses a generic Si3054 Modem chip > from which scanModem usually accesses further detailed information. > Usually it is in the contents of: > /proc/asound/card0/codec#1 > Please try to read this out by: > $ cat /proc/asound/card0/codec#1 > > Also do try to get more detailed information from Microsoft > diagnostics about the chipset. > > MarvS > > On Wed, Dec 17, 2008 at 12:51 AM, Ködmön Zsolt <kodmen@xxxxxxxxx> wrote: >> >> Yes, of course, I've run it as root. I've istalled the other program, >> but I receiwe the following message: >> >> root@kodilapos:~# slmodemd -c HUNGARY --alsa hw:0,6error: alsa setup: >> cannot open playback device 'hw:0,6': Device or resource busy >> error: cannot setup device `hw:0,6' >> >> Thank you! >> >> >> Marvin Stodolsky írta: >>> Kodmen >>> >>> Further sofware >>> Did you do the command with Root permission? >>> >>> $ su root >>> # slmodemd -c HUNGARY --alsa hw:0,6 >>> >>> If this is not the issue, I have some follow through Ideas but report >>> back first. >>> >>> Marv S >>> >>> On Tue, Dec 16, 2008 at 2:28 PM, Ködmön Zsolt <kodmen@xxxxxxxxx> wrote: >>>> Hello MarvS! >>>> >>>> Thank You for the answer! >>>> I've tried to fallow your instructionst, i've read the doc's. I've done >>>> the following things: >>>> >>>> SLMODEMD.gcc4.2# ./setup >>>> >>>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking >>>> for version 2.9.11 >>>> >>>> With root permission, the typical activation command is: >>>> for modems hosted on High Definition Audio cards >>>> slmodemd -c USA --alsa hw:0,6 >>>> for modems of the AC'97 family >>>> slmodemd -c USA --alsa modem:1 >>>> for modems on ALI5451 sound cards >>>> slmodemd -c USA --alsa hw:0,1 >>>> for Smartlink chipset PCI card modems: >>>> slmodemd -c USA /dev/slamr0 >>>> for Smartlink chipset USB modems >>>> slmodemd -c USA /dev/slusb0 >>>> >>>> If not in the USA, replace USA with a country from the output of: >>>> slmodemd --countrylist >>>> For other slmodemd parameters, query with: >>>> slmodemd --help >>>> >>>> Report any problems to discuss@xxxxxxxxxxxxx >>>> >>>> And then: >>>> >>>> slmodemd -c HUNGARY --alsa hw:0,6 >>>> error: alsa setup: cannot open playback device 'hw:0,6': Device or >>>> resource busy >>>> error: cannot setup device `hw:0,6' >>>> >>>> >>>> I'm sure, I've forgot something, but what? Should I install >>>> "slmodem-2.9.11-20080817.tar.gz " too? >>>> I've problems whit the hald >>>> (http://www.kodmen.hu/_spgm/gal/UHU-Linux/hal_error2.png) till one week, >>>> can it be matter? >>>> >>>> Thank you one more time for helping me! >>>> >>>> Kodmen >>>> >>
