Hello MarvS!
Thank You for the answer!
I've tried to fallow your instructionst, i've read the doc's. I've done
the following things:
SLMODEMD.gcc4.2# ./setup
Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking
for version 2.9.11
With root permission, the typical activation command is:
for modems hosted on High Definition Audio cards
slmodemd -c USA --alsa hw:0,6
for modems of the AC'97 family
slmodemd -c USA --alsa modem:1
for modems on ALI5451 sound cards
slmodemd -c USA --alsa hw:0,1
for Smartlink chipset PCI card modems:
slmodemd -c USA /dev/slamr0
for Smartlink chipset USB modems
slmodemd -c USA /dev/slusb0
If not in the USA, replace USA with a country from the output of:
slmodemd --countrylist
For other slmodemd parameters, query with:
slmodemd --help
Report any problems to discuss@xxxxxxxxxxxxx
And then:
slmodemd -c HUNGARY --alsa hw:0,6
error: alsa setup: cannot open playback device 'hw:0,6': Device or
resource busy
error: cannot setup device `hw:0,6'
I'm sure, I've forgot something, but what? Should I install
"slmodem-2.9.11-20080817.tar.gz " too?
I've problems whit the hald
(http://www.kodmen.hu/_spgm/gal/UHU-Linux/hal_error2.png) till one week,
can it be matter?
Thank you one more time for helping me!
Kodmen
