get the package SLMODEMD.gcc4.2.tar.gz from: http://linmodems.technion.ac.il/packages/smartlink/Read the inccluded DOCs Your modem activation command will be: # slmodemd -c HUNGARY --alsa hw:0,6 MarvS On 12/9/08, Ködmön Zsolt <kodmen@xxxxxxxxx> wrote:> Hello!>> I want to ask for help. Am I at the right place?>> I tried to test my modem, I've scanned, but the program hadn't found> under the usb modems, however it should be there -see word motorola-.> How could I install a driver for it? What can I do?> If you need more information, please write to me.>> Thank you!>> Kodmen>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,> as HTML can contain viruses. Use as the email Subject Line:> YourName, YourCountry kernel 2.6.23.9-1> With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.> YourCountry will enable Country specific guidance. Linux experts in YourCountry> can be found through: http://www.linux.org/groups/index.html.> They will know your Country's modem code, which may be essential for dialup service.> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.> So in a day, also check the Archived responses at http://www.linmodems.org> -------------------------- System information ----------------------------> CPU=i686,> Linux version 2.6.23.9-1 (uhubuild@build) (gcc version 4.2.2) #1 SMP Thu Feb 14 13:43:22 CET 2008> scanModem update of: 2008_11_06> The modem symbolic link is /dev/modem -> ttySL0> The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0> There are no blacklisted modem drivers in /etc/modprobe* files> Attached USB devices are:> ID 0425:f102 Motorola Semiconductors HK, Ltd> ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)> ID 046d:092f Logitech, Inc. QuickCam express Plus> ID 076b:3021 OmniKey AG CardMan 3121> ID 03eb:0902 Atmel Corp.> ID ed06:8000> ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20> ID 04a9:1097 Canon, Inc.> ID 05e3:0606 Genesys Logic, Inc. D-Link DUB-H4 USB 2.0 Hub>> USB modems not recognized>> For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:> PCI slot PCI ID SubsystemID Name> ---------- --------- --------- --------------> 00:1b.0 8086:27d8 1734:10cd 8086:27d8 Audio device: Intel Corporation 82801G>> Modem interrupt assignment and sharing:> 21: 4869851 0 IO-APIC-fasteoi HDA Intel> --- Bootup diagnostics for card in PCI slot 00:1b.0 ----> [ 32.228025] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21> [ 32.228051] PCI: Setting latency timer of device 0000:00:1b.0 to 64>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====> The ALSA packages provide audio support and also drivers for some modems.> ALSA diagnostics are written during bootup to /proc/asound/ folders.>> The ALSA verion is 1.0.14> The modem cards detected by "aplay -l" are:> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]>> The /proc/asound/pcm file reports:> -----------------------> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1> 00-01: ALC861 Digital : ALC861 Digital : playback 1> 00-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2>> about /proc/asound/cards:> ------------------------> 0 [Intel ]: HDA-Intel - HDA Intel> HDA Intel at 0xf8000000 irq 21>> PCI slot 00:1b.0 has a High Definition Audio Card> The drivers are in the kernel modules tree at:> /lib/modules/2.6.23.9-1/kernel/sound/pci/hda/snd-hda-intel.ko> If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:> snd_hda_intel 266784 6> snd_pcm 65028 4 snd_pcm_oss,snd_hda_intel> snd_page_alloc 11272 2 snd_hda_intel,snd_pcm> snd_hwdep 10244 1 snd_hda_intel> snd 43284 19 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep> ----------> provide audio + modem support with the modem chip residing on the subsystem.> Any particular card can host any one of several soft modem chips.>> === Finished firmware and bootup diagnostics, next deducing cogent software. ===>> A candidate modem is not evident among the PCI devices:> ------------------------------------------------> 00:1b.0 8086:27d8 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)> 00:1f.1 8086:27df IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)> 00:1f.2 8086:27c5 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)> 00:1f.3 8086:27da SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)> 01:00.0 1002:714a VGA compatible controller: ATI Technologies Inc M52 [Mobility Radeon X1300]> 04:00.0 10ec:8168 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)> 05:00.0 8086:4222 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)> 06:04.0 1217:00f7 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)> 06:04.2 1217:7120 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)> 06:04.3 1217:7130 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)> ------------------------------------------------> with USB and bridge devices not displayed.>> If your modem is connected by an external serial cable,> or mounted internally on an ISA card, scanModem would not access it.> Try with Root permission> $ wvdialconf /etc/wvdial.conf> to detect these modem types and some USB modems.> If the detection is successful, read the DOCs/wvdial.txt .> Edit the /etc/wvdial.conf with Root permission:> gedit /etc/wvdial.conf> will be able to dial out with Root permission:> wvdial>> Many modems for which scanModem fails have Conexant chips.> From http://www.linuxant.com/drivers/modemident.php> get the ListModem tool, which will report on Conexant chipset modems>> If the above tests fail, please provide any independent information available on your modem.> If an alternative boot into Microsoft windows can be done, do mouse> clicks on:> Start > Settings > Control Panel > Classical View (for Window XP) > System> > Hardware > Device Manager > Modems > Click on the + > Modem. Double click to> expand the graphic. Manufacturer information may be displayed. For example, CXT> stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor> and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.> Next do the Query Modem and record the ATI specifications displayed such as:> ATI3 - Agere SoftModem Version 2.1.22> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27> Try to identify the modem setup file, with name perhaps MODEM.INF.> If may contain chipset Vendor informaton.>> The /proc/asound/ audio+modem diagostics are being copied.> Finished copy to Modem/ALSAroot.tgz>> Predictive diagnostics for card in bus 00:1b.0:> Modem chipset not detected on> NAME="8086:27d8 Audio device: Intel Corporation 82801G "> CLASS=0403> PCIDEV=8086:27d8> SUBSYS=1734:10cd> IRQ=21> HDA=8086:27d8> SOFT=8086:27d8.HDA> SLMODEMD_DEVICE=hw:0,6> Driver=snd-hda-intel>>> High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,> and many are supported by the ALSA audio+modem driver snd-hda-intel> A modem was not detected on HDA card 8086:27d8.> If another modem card is present, then most likely 8086:27d8 does not host a modem.> If another modem card has not been detected, then possibilities are:> 1) A Conexant modem chip is present on 8086:27d8, as Conexant chips> are frequently not detectable by ALSA diagnostics> 2) The modem may be of the older non-PCI Controller Chipset (hardware) type.> Try detection with Root permission:> wvdialconf /etc/wvdial.conf>> For candidate modem in: 00:1b.0> 0403 8086:27d8 Audio device: Intel Corporation 82801G> Primary device ID: 8086:27d8> Subsystem PCI_id 1734:10cd> Softmodem codec or chipset from diagnostics:> from Archives:>>>> Support type needed or chipset:>> Support can likely be achieved through two mutually exclusive alternatives:> 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt> The following ALSA alternative CANNOT work with Conexant modems.>> 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and> to test get the package SLMODEMD.gcc4.2.tar.gz from:> http://linmodems.technion.ac.il/packages/smartlink/>> ----------------end Softmodem section -------------->> Writing DOCs/Intel.txt>> For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt>>> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the> hsfmodem package matching your System. For several Linux distros, there are> precompiled drivers matched to specific kernels. These have within the FileName,> your KernelVersion: 2.6.23.9_1> They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php> A more precise location may be given a few paragraphs below.> If an EXACT Match with your your KernelVersion is not found, one of the> "Generic packages with source" near the bottom of the page must be used.> Downloaded packages must be moved into the Linux partition (home folder is OK)> and unzipped with:> unzip hsf*.zip> The installation command for a .deb suffic packages is, with root/adm permission:> dpkg -i hsf*.deb> while for .rpm suffix it is, with:> rpm -i hsf*.rpm> Start at http://www.linuxant.com/drivers/hsf/full for> eventually download of a hsfmodem-7.68.00.12full_k.???.zip package> with ??? the package type (deb, rpm, tar etc)> These packages have compiled drivers but will also compile a driver,> if there is a mismatch between the resident kernel and provided driver.> The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support>> Read DOCs/Conexant.txt>> Writing DOCs/Conexant.txt>> Writing DOCs/Smartlink.txt> ============ end Smartlink section =====================>>> The base of the UDEV device file system is: /dev/.udev>> Versions adequately match for the compiler installed: 4.2.2> and the compiler used in kernel assembly: 4.2.2>>>> Minimal compiling resources appear complete:> make utility - /usr/bin/make> Compiler version 4.2> linuc_headers base folder /lib/modules/2.6.23.9-1/build>> However some compilations and executable functions may need additional files,> in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .> For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.> In not included on your install CD, search for them at http://packages.ubuntu.com> or comparable Repository for other Linux distros.> When compiling ALSA drivers, the utility "patch" will also be needed.>>>> For Debian and some related distributions, a package kernel-kbuild-2.6-23 may be needed to support driver compiling.>>> If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then> Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev> and any of its dependents, under Ubuntu linux-libc-dev>> If an alternate ethernet connection is available,> $ apt-get update> $ apt-get -s install linux-kernel-devel> will install needed packages.> For Debian/Ubuntu related distributions, run the following command to display the needed package list:>> Otherwise packages have to be found through http://packages.ubuntu.com> Once downloaded and transferred into a Linux partition,> they can be installed alltogether with:> $ sudo dpkg -i *.deb>>> Checking pppd properties:> -rwxr-xr-x 1 root root 298536 2006-07-17 14:22 /usr/sbin/pppd>> In case of an "error 17" "serial loopback" problem, see:> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html>> To enable dialout without Root permission do:> $ su - root (not for Ubuntu)> chmod a+x /usr/sbin/pppd> or under Ubuntu related Linuxes> chmod a+x /usr/sbin/pppd>> Checking settings of: /etc/ppp/options> lock>> In case of a message like:> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1> Which can interfere with Browser naviagation.>> Don't worry about the following, it is for experts should trouble shooting be necessary.> ==========================================================>> # /etc/udev/rules.d/60-slmodemd.rules>> ACTION=="add", SUBSYSTEM=="sound", DEVPATH=="/class/sound/pcmC0D6p", RUN+="/sbin/slmodemdstart"> Checking for modem support lines:> --------------------------------------> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-12-05 20:06 /dev/modem -> ttySL0> slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 2008-12-05 20:06 /dev/ttySL0 -> /dev/pts/0> Within /etc/udev/ files:> /etc/udev/rules.d/60-slmodemd.rules:# /etc/udev/rules.d/60-slmodemd.rules> /etc/udev/rules.d/60-slmodemd.rules:ACTION=="add", SUBSYSTEM=="sound", DEVPATH=="/class/sound/pcmC0D6p", RUN+="/sbin/slmodemdstart"> /etc/udev/rules.d/50-udev-default.rules:ACTION=="add", KERNEL=="tty*", SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="02", ATTRS{bInterfaceSubClass}=="02", SYMLINK+="modem"> /etc/udev/rules.d/50-udev-default.rules:ACTION=="add", KERNEL=="tty*", SUBSYSTEMS=="usb", ATTRS{manufacturer}=="MODEX", ATTRS{product}=="AUDIOTEL", SYMLINK+="modem"> /etc/udev/rules.d/50-udev-default.rules:ACTION=="add", KERNEL=="tty*", SUBSYSTEMS=="usb", ATTRS{manufacturer}=="AUDIOTEL", ATTRS{product}=="MODEX", SYMLINK+="modem"> /etc/udev/rules.d/50-udev-default.rules:ACTION=="add", KERNEL=="tty*", SUBSYSTEMS=="usb", ATTRS{product}=="*USB Modem*", SYMLINK+="modem"> /etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/mwave", GROUP="media"> Within /etc/modprobe.conf files:> /etc/modprobe.d/ndiswrapper:alias modem0 ndiswrapper> Within any ancient /etc/devfs files:>> Within ancient kernel 2.4.n /etc/module.conf files:>> --------- end modem support lines -------->>>>
