I am in the united states
cutting and pasting modemdata.txt and attaching
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-9-generic
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2
(Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008
scanModem update of: 2008_11_06
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 059b:0032 Iomega Corp. Zip 250 (Ver 2)
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 01:08.1, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:08.1 127a:4321 1235:4321 Communication controller: Rockwell
International Riptide HCF 56k PCI Modem
Modem interrupt assignment and sharing:
10: 10 XT-PIC-XT RIPTIDE
--- Bootup diagnostics for card in PCI slot 01:08.1 ----
[ 0.075189] PCI: 0000:01:08.1 reg 10 32bit mmio: [f4100000, f410ffff]
[ 0.075273] pci 0000:01:08.1: supports D2
[ 0.075284] pci 0000:01:08.1: PME# supported from D3hot D3cold
[ 0.075300] pci 0000:01:08.1: PME# disabled
[ 34.730830] RIPTIDE 0000:01:08.0: sharing IRQ 10 with 0000:01:08.1
[ 81.764189] pci 0000:00:01.0: sharing IRQ 10 with 0000:01:08.1
The PCI slot 01:08.1 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 01:08.1:
Modem chipset detected on
NAME="Communication controller: Rockwell International Riptide HCF 56k
PCI Modem"
CLASS=0780
PCIDEV=127a:4321
SUBSYS=1235:4321
IRQ=10
IDENT=HCF.Riptide
For candidate modem in: 01:08.1
0780 Communication controller: Rockwell International Riptide HCF 56k
PCI Modem
Primary device ID: 127a:4321
Support type needed or chipset: HCF.Riptide
Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . Read
DOCs/InfoGeneral.txt about alternatives.
----------------end Softmodem section --------------
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
Under 2.4.n kernels install both the RIPTIDE and HCF or HSF drivers,
otherwise the modem will *not* work.
http://www.linuxant.com/drivers/riptide/index.php explains why
this modem which REQUIRES the additional installation of a Riptide driver.
Under 2.6.n kernels, the hsfmodem package may provide modem support.
But there will be no audio functions. See
http://www.linuxant.com/drivers/riptide/index.php?PHPSESSID=19b31933499f87b5b150db2315f714bd
From http://www.linuxant.com/drivers//downloads-ubuntu-x86.php
download -7.68.00.12full_k2.6.27_9_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip *.zip
Then install with:
$ sudo dpkg -i *.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-9-generic/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273064 2008-10-15 21:51 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-9-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008
scanModem update of: 2008_11_06
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 059b:0032 Iomega Corp. Zip 250 (Ver 2)
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 01:08.1, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:08.1 127a:4321 1235:4321 Communication controller: Rockwell International Riptide HCF 56k PCI Modem
Modem interrupt assignment and sharing:
10: 10 XT-PIC-XT RIPTIDE
--- Bootup diagnostics for card in PCI slot 01:08.1 ----
[ 0.075189] PCI: 0000:01:08.1 reg 10 32bit mmio: [f4100000, f410ffff]
[ 0.075273] pci 0000:01:08.1: supports D2
[ 0.075284] pci 0000:01:08.1: PME# supported from D3hot D3cold
[ 0.075300] pci 0000:01:08.1: PME# disabled
[ 34.730830] RIPTIDE 0000:01:08.0: sharing IRQ 10 with 0000:01:08.1
[ 81.764189] pci 0000:00:01.0: sharing IRQ 10 with 0000:01:08.1
The PCI slot 01:08.1 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 01:08.1:
Modem chipset detected on
NAME="Communication controller: Rockwell International Riptide HCF 56k PCI Modem"
CLASS=0780
PCIDEV=127a:4321
SUBSYS=1235:4321
IRQ=10
IDENT=HCF.Riptide
For candidate modem in: 01:08.1
0780 Communication controller: Rockwell International Riptide HCF 56k PCI Modem
Primary device ID: 127a:4321
Support type needed or chipset: HCF.Riptide
Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . Read DOCs/InfoGeneral.txt about alternatives.
----------------end Softmodem section --------------
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Under 2.4.n kernels install both the RIPTIDE and HCF or HSF drivers,
otherwise the modem will *not* work.
http://www.linuxant.com/drivers/riptide/index.php explains why
this modem which REQUIRES the additional installation of a Riptide driver.
Under 2.6.n kernels, the hsfmodem package may provide modem support.
But there will be no audio functions. See
http://www.linuxant.com/drivers/riptide/index.php?PHPSESSID=19b31933499f87b5b150db2315f714bd
From http://www.linuxant.com/drivers//downloads-ubuntu-x86.php
download -7.68.00.12full_k2.6.27_9_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip *.zip
Then install with:
$ sudo dpkg -i *.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-9-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273064 2008-10-15 21:51 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
