Kodmen Re: ID 0425:f102 Motorola Semiconductors HK, LtdIf this is an external USB modem, we don't know which drivers areappropriate. See the Softmodem.txt about getting diagnosticinformation about it under Microsoft, Including the driver informationfrom the Driver Details TAB # slmodemd -c HUNGARY --alsa hw:0,6is the activation command appropriate to your internal modem:Audio device: Intel Corporation 82801G "CLASS=0403PCIDEV=8086:27d8SUBSYS=1734:10cdIRQ=21HDA=8086:27d8SOFT=8086:27d8.HDASLMODEMD_DEVICE=hw:0,6Driver=snd-hda-intel---------which houses a generic Si3054 Modem chipfrom which scanModem usually accesses further detailed information.Usually it is in the contents of: /proc/asound/card0/codec#1Please try to read this out by:$ cat /proc/asound/card0/codec#1 Also do try to get more detailed information from Microsoftdiagnostics about the chipset. MarvS On Wed, Dec 17, 2008 at 12:51 AM, Ködmön Zsolt <kodmen@xxxxxxxxx> wrote:>>> Yes, of course, I've run it as root. I've istalled the other program,> but I receiwe the following message:>> root@kodilapos:~# slmodemd -c HUNGARY --alsa hw:0,6error: alsa setup:> cannot open playback device 'hw:0,6': Device or resource busy> error: cannot setup device `hw:0,6'>> Thank you!>>> Marvin Stodolsky írta:>> Kodmen>>>> Further sofware>> Did you do the command with Root permission?>>>> $ su root>> # slmodemd -c HUNGARY --alsa hw:0,6>>>> If this is not the issue, I have some follow through Ideas but report>> back first.>>>> Marv S>>>> On Tue, Dec 16, 2008 at 2:28 PM, Ködmön Zsolt <kodmen@xxxxxxxxx> wrote:>>> Hello MarvS!>>>>>> Thank You for the answer!>>> I've tried to fallow your instructionst, i've read the doc's. I've done>>> the following things:>>>>>> SLMODEMD.gcc4.2# ./setup>>>>>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking>>> for version 2.9.11>>>>>> With root permission, the typical activation command is:>>> for modems hosted on High Definition Audio cards>>> slmodemd -c USA --alsa hw:0,6>>> for modems of the AC'97 family>>> slmodemd -c USA --alsa modem:1>>> for modems on ALI5451 sound cards>>> slmodemd -c USA --alsa hw:0,1>>> for Smartlink chipset PCI card modems:>>> slmodemd -c USA /dev/slamr0>>> for Smartlink chipset USB modems>>> slmodemd -c USA /dev/slusb0>>>>>> If not in the USA, replace USA with a country from the output of:>>> slmodemd --countrylist>>> For other slmodemd parameters, query with:>>> slmodemd --help>>>>>> Report any problems to discuss@xxxxxxxxxxxxx>>>>>> And then:>>>>>> slmodemd -c HUNGARY --alsa hw:0,6>>> error: alsa setup: cannot open playback device 'hw:0,6': Device or>>> resource busy>>> error: cannot setup device `hw:0,6'>>>>>>>>> I'm sure, I've forgot something, but what? Should I install>>> "slmodem-2.9.11-20080817.tar.gz " too?>>> I've problems whit the hald>>> (http://www.kodmen.hu/_spgm/gal/UHU-Linux/hal_error2.png) till one week,>>> can it be matter?>>>>>> Thank you one more time for helping me!>>>>>> Kodmen>>>>>
