BB For modem under Ubuntu .6.20-15-386, gcc version 4.1.2 Class 0403: 10de:026c Audio device: nVidia Corporation MCP51 HighDefinition Audio Primary PCI_id 10de:026c Subsystem PCI_id 1043:1367 Softmodem codec or Vendor from diagnostics: from Archives: Motorola_Si3054 The HDA card softmodem chip is 0x0573055 reporting: /proc/asound/pcm-------------------------------00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 100-01: ALC861 Digital : ALC861 Digital : playback 100-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2 It is correct to do:sudo slmodemd -c GERMANY --alsa hw:0,6> SmartLink Soft Modem: version 2.9.9e-pre1 Mar 20 2007 14:45:09> symbolic link `/dev/ttySL0' -> `/dev/pts/5' created.> modem `hw:0,6' created. TTY is `/dev/pts/5'> Use `/dev/ttySL0' as modem device, Ctrl+C for termination. but you are using an old version 2.9.9e-prePlease delete the /usr/sbin/slmodemdand replace it with the one from SLMODEMD-1.0.13.tar.gzwhich has the version 2.9.11 update. after$ sudo slmodemd -c GERMANY --alsa hw:0,6 open a 2nd console and$ sudo wvdialconf /etc/wvdial.confwhich will find the modem. Then edit in your personal info with:$ sudo gedit /etc/wvdial.confreplacing the <????> blocks and adding a line: Carrier Check = no Then try a dialout with$ sudo wvdial Report back if the there is a recurrence of> error: period size 48 is not supported by playback (64). MarvS On 5/27/07, Bernhard Bauer <Bernhard-Bauer@xxxxxx> wrote:> Hello,>> I want to test my intern winmodem on my laptop:> Codec: Motorola Si3054> Address: 1> Vendor Id: 0x10573055> Subsystem Id: 0x104310c6> Revision Id: 0x100700> Karte 0: NVidia [HDA NVidia], Gerät 6: Si3054 Modem [Si3054 Modem]>> I have done the following:>> slmodemd -c GERMANY --alsa hw:0,6> SmartLink Soft Modem: version 2.9.9e-pre1 Mar 20 2007 14:45:09> symbolic link `/dev/ttySL0' -> `/dev/pts/5' created.> modem `hw:0,6' created. TTY is `/dev/pts/5'> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.>> Then I have typed in wvdial and this happens:>> wvdial> --> WvDial: Internet dialer version 1.56> --> Cannot get information for serial port.> --> Initializing modem.> --> Sending: ATZ> ATZ> OK> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> OK> --> Modem initialized.> --> Sending: ATDT0191771> --> Waiting for carrier.> ATDT0191771> NO CARRIER> ERROR>> and slmodemd tells me:>> error: period size 48 is not supported by playback (64).>> What can I do to get the winmodem working on my laptop?>> In the end there is ModemData from scanmodem>> Yours sincerelly>> Bernhard Bauer>>> --> GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS.> Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail>>
