Re: No CallRec found in CallTable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It works!
And it looks like it works in both cases.. with 1 & 2 semicolons :)
Gatekeeper don't send LRQ to that neighbors.
Also I have to point that gk send LRQ only if it receives ARQ, i.e. only for registered call.
For unregistered call it only said in log: "Destination not found for unregistered call".
So I think Artem Klyuka can solve his problem just adding this to config:


[RasSrv::Neighbors]
gw1=xx.xx.xx.xx;

Regards.

On Fri, 9 Jan 2004 16:05:55 +0100, Zygmuntowicz Michal <m.zygmuntowicz@onet.pl> wrote:

Well, I am not sure but it seems that gnugk will always send LRQ.
But if you can confirm that it works like the documentation states
I would like to know this. Otherwise it has to be fixed .

----- Original Message ----- From: "Alex Golyshev" <alex.golyshev@mail.ru>
Sent: Friday, January 09, 2004 2:32 PM



I've read manual more careful - it is possilble do not send LRQ at all...
Quote: "If you specify an empty prefix, no LRQ will be sent to that neighbor, but the gatekeeper will accept LRQs from it."
So if we change something in config:


[RasSrv::Neighbors]
gw1=xx.xx.xx.xx;

... the gatekeeper will not send LRQ to gw1. Am I right? Or one more semicolon needed (gw1=xx.xx.xx.xx;;)?

On Fri, 9 Jan 2004 13:27:47 +0100, Zygmuntowicz Michal <m.zygmuntowicz@onet.pl> wrote:

> Good point:) In gk 2.2 neighbors can be much better configured
> with separate lists for source and destination prefixes. So it should
> be possible to accept any prefix and do not send LRQ at all.
>
> ----- Original Message ----- From: "Alex Golyshev" > <alex.golyshev@mail.ru>
> Sent: Friday, January 09, 2004 12:59 PM
>
>
>> But, Michal, I think this problem currently can be solved like this.
>> He needs to add gw1 to the section [RasSrv::Neighbors] of configuration:
>>
>> [RasSrv::Neighbors]
>> gw1=xx.xx.xx.xx
>>
>> Gatekeeper accept calls coming from its neighbors "without a pre->> existing CallRec found in the CallTable" (from the manual), if the >> AcceptNeighborsCalls option from section [RoutedMode] is set to 1 >> (default state). And the security is OK (gk will accept calls ONLY from >> gw1).
>>
>> We use similiar configuration to accept calls coming from gateways that >> do not register on gatekeeper. The background effect is that gk will >> send LRQ to the gw1 each time it doesn't know where to send a call.



------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/





-- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/


------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux