Re: No CallRec found in CallTable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Well, I am not sure but it seems that gnugk will always send LRQ.
But if you can confirm that it works like the documentation states
I would like to know this. Otherwise it has to be fixed .

----- Original Message ----- 
From: "Alex Golyshev" <alex.golyshev@mail.ru>
Sent: Friday, January 09, 2004 2:32 PM


> I've read manual more careful - it is possilble do not send LRQ at all...
> Quote: "If you specify an empty prefix, no LRQ will be sent to that 
> neighbor, but the gatekeeper will accept LRQs from it."
> So if we change something in config:
> 
> [RasSrv::Neighbors]
> gw1=xx.xx.xx.xx;
> 
> ... the gatekeeper will not send LRQ to gw1. Am I right? Or one more 
> semicolon needed (gw1=xx.xx.xx.xx;;)?
> 
> On Fri, 9 Jan 2004 13:27:47 +0100, Zygmuntowicz Michal 
> <m.zygmuntowicz@onet.pl> wrote:
> 
> > Good point:) In gk 2.2 neighbors can be much better configured
> > with separate lists for source and destination prefixes. So it should
> > be possible to accept any prefix and do not send LRQ at all.
> >
> > ----- Original Message ----- From: "Alex Golyshev" 
> > <alex.golyshev@mail.ru>
> > Sent: Friday, January 09, 2004 12:59 PM
> >
> >
> >> But, Michal, I think this problem currently can be solved like this.
> >> He needs to add gw1 to the section [RasSrv::Neighbors] of configuration:
> >>
> >> [RasSrv::Neighbors]
> >> gw1=xx.xx.xx.xx
> >>
> >> Gatekeeper accept calls coming from its neighbors "without a pre- 
> >> existing CallRec found in the CallTable" (from the manual), if the 
> >> AcceptNeighborsCalls option from section [RoutedMode] is set to 1 
> >> (default state). And the security is OK (gk will accept calls ONLY from 
> >> gw1).
> >>
> >> We use similiar configuration to accept calls coming from gateways that 
> >> do not register on gatekeeper. The background effect is that gk will 
> >> send LRQ to the gw1 each time it doesn't know where to send a call.



-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux