Re: No CallRec found in CallTable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



But, Michal, I think this problem currently can be solved like this.
He needs to add gw1 to the section [RasSrv::Neighbors] of configuration:

[RasSrv::Neighbors]
gw1=xx.xx.xx.xx

Gatekeeper accept calls coming from its neighbors "without a pre-existing CallRec found in the CallTable" (from the manual), if the AcceptNeighborsCalls option from section [RoutedMode] is set to 1 (default state). And the security is OK (gk will accept calls ONLY from gw1).

We use similiar configuration to accept calls coming from gateways that do not register on gatekeeper. The background effect is that gk will send LRQ to the gw1 each time it doesn't know where to send a call.

On Thu, 8 Jan 2004 23:06:41 +0100, Zygmuntowicz Michal <m.zygmuntowicz@onet.pl> wrote:

Currently you can do nothing I guess. Try to enable AcceptUnregisteredCalls=1
and configure approtiate firewall rules - it will give you much better security than
AcceptUnregisteredCalls=0.
There are plans to include some option like AcceptPermanentCalls to the config
soon.


----- Original Message ----- From: "Artem Klyuka" <artem.klyuka@olviabeta.com>
Sent: Thursday, January 08, 2004 7:00 PM



I have this situation

two gateways

i want to make call in PROXY mode

gw1 -> GnuGK-gw2

Here is my Gnu.ini

[Proxy]
Enable=1
[GkStatus::Auth]
rule=allow

[Gatekeeper::Acct]
FileAcct=required
[FileAcct]
DetailFile=/var/log/gk/cdr.log
Rotate=0

[RasSrv::GWPrefixes]
gw1=1#
gw2=2#

[RasSrv::PermanentEndpoints]
xx.xx.xx.xx=gw1;1#
xx.xx.xx.xx=gw2;2#

and i have dial-peer in first gateway session target ipv4:10.1.1.1 destination pattern 1..
tech-prefix 1#


The problem is that if i use AcceptUnregisteredCalls=1 all is OK , i can call from one gateway to other but , if i use AcceptUnregisteredCalls=0 - i'm getting error - No CallRec
found in CallTable



I don't want to use AcceptUnregisteredCalls=1 ( from security reason ) but
i don't want register my gateways with GNUGK
via RAS .


What can i do to solve this problem ?



------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/





-- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/


------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux