olivier taylor wrote: > /etc/system/dahdi.conf doesn't exist on my server... Sorry, I meant /etc/dahdi/system.conf > > Olivier > > Matthew Fredrickson a ?crit : >> olivier taylor wrote: >>> Okido, it works perfectly again, Thx Matthew, you are the source for >>> SS7. >> If you're using a Digium card, you might change your dchan= line to >> mtp2= in /etc/system/dahdi.conf for better signalling channel >> reliability. >> >> Matthew Fredrickson >>> >>> Best regards, >>> >>> Olivier >>> >>> Matthew Fredrickson a ?crit : >>>> olivier taylor wrote: >>>>> Okido, I have then to uninstall zaptel? >>>>> >>>>> For dahdi, it's installed, but I am lost with the configurations >>>>> files. >>>>> Previously, I had libss7 working (before the need to use dahdi, >>>>> and had no problems. >>>>> >>>>> Are the zaptel and zapata files similar to dahdi/system.conf and >>>>> chan_dahdi.conf? >>>> >>>> Exact same syntax should get you up and running. Copy >>>> /etc/zaptel.conf to /etc/dahdi/system.conf and >>>> /etc/asterisk/zapata.conf to /etc/asterisk/chan_dahdi.conf. >>>> >>>> Make sure you also are using a fairly recent version of dahdi (I'd >>>> just update it to latest, unless you checked it out less than a >>>> week or so ago). >>>> >>>> Matthew Fredrickson >>>>> >>>>> When starting, I have now"chan_dahdi.c:12843 linkset_addsigchan: >>>>> Invalid networkindicator!" >>>>> >>>>> Also, as dahdi doesn't start, I have no cli commands, are the ss7 >>>>> commands replaced by something? >>>>> >>>>> Kind regards, >>>>> >>>>> Olivier >>>>> >>>>> system.conf : >>>>> span=1,0,0,ccs,hdb3 >>>>> bchan=1-15 >>>>> dchan=16 >>>>> bchan=17-31 >>>>> >>>>> chan_dahdi.conf : >>>>> [channels] >>>>> callwaiting=yes >>>>> callwaitingcallerid=yes >>>>> threewaycalling=yes >>>>> transfer=yes >>>>> cancallforward=yes >>>>> callreturn=yes >>>>> echocancel=yes >>>>> echocancelwhenbridged=yes >>>>> group=1 >>>>> callgroup=1 >>>>> pickupgroup=1 >>>>> >>>>> networkindicator=national >>>>> >>>>> ss7_calling_nai=international >>>>> ss7_internationalprefix = 00 >>>>> ss7_nationalprefix = >>>>> >>>>> >>>>> signalling = ss7 >>>>> ss7type = itu ; or ansi if you are using an ANSI link >>>>> >>>>> linkset = 1 ; Pick a number for your linkset identifier in >>>>> chan_dahdi.conf >>>>> >>>>> pointcode = 8002 >>>>> adjpointcode = 3353 >>>>> defaultdpc = 3353 >>>>> >>>>> cicbeginswith = 1 ; Number to start counting the CICs from. So if >>>>> Zap/1 to >>>>> channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15 >>>>> cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 >>>>> so we initialize >>>>> ; cicbeginswith to 17 before we declare those channels >>>>> channel = 17-31 ; This assigns CICs 17-31 to channels 17-31 >>>>> sigchan = 16 ; This is where you declare which Zap channel is your >>>>> signalling >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Joseph a ?crit : >>>>>> On 08/01/08, olivier taylor wrote: >>>>>> >>>>>>> Hi all, >>>>>>> >>>>>>> Installed : >>>>>>> dahdi-complete >>>>>>> zaptel 1.4.11 >>>>>>> libss7-trunk >>>>>>> When compiling libss7, I get : >>>>>>> >>>>>>> gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread >>>>>>> ss7linktest.c: In function ?zap_open?: >>>>>>> ss7linktest.c:200: error: ?DAHDI_BUFFERINFO? undeclared (first >>>>>>> use in >>>>>>> this function) >>>>>>> ss7linktest.c:200: error: (Each undeclared identifier is >>>>>>> reported only once >>>>>>> ss7linktest.c:200: error: for each function it appears in.) >>>>>>> ss7linktest.c:200: error: expected ?;? before ?bi? >>>>>>> ss7linktest.c:207: error: ?bi? undeclared (first use in this >>>>>>> function) >>>>>>> make: *** [ss7linktest] Error 1 >>>>>>> >>>>>>> Any idea of what's wrong? >>>>>>> >>>>>> >>>>>> You need to use dahdi instead of zaptel. >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------ >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>>>>> >>>>>> asterisk-ss7 mailing list >>>>>> To UNSUBSCRIBE or update options visit: >>>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>> ------------------------------------------------------------------------ >>>>> >>>>> >>>>> _______________________________________________ >>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>>>> >>>>> asterisk-ss7 mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>> >>>> >>> >> >> >
|