/etc/system/dahdi.conf doesn't exist on my server... Olivier Matthew Fredrickson a ?crit : > olivier taylor wrote: >> Okido, it works perfectly again, Thx Matthew, you are the source for >> SS7. > If you're using a Digium card, you might change your dchan= line to > mtp2= in /etc/system/dahdi.conf for better signalling channel > reliability. > > Matthew Fredrickson >> >> Best regards, >> >> Olivier >> >> Matthew Fredrickson a ?crit : >>> olivier taylor wrote: >>>> Okido, I have then to uninstall zaptel? >>>> >>>> For dahdi, it's installed, but I am lost with the configurations >>>> files. >>>> Previously, I had libss7 working (before the need to use dahdi, and >>>> had no problems. >>>> >>>> Are the zaptel and zapata files similar to dahdi/system.conf and >>>> chan_dahdi.conf? >>> >>> Exact same syntax should get you up and running. Copy >>> /etc/zaptel.conf to /etc/dahdi/system.conf and >>> /etc/asterisk/zapata.conf to /etc/asterisk/chan_dahdi.conf. >>> >>> Make sure you also are using a fairly recent version of dahdi (I'd >>> just update it to latest, unless you checked it out less than a week >>> or so ago). >>> >>> Matthew Fredrickson >>>> >>>> When starting, I have now"chan_dahdi.c:12843 linkset_addsigchan: >>>> Invalid networkindicator!" >>>> >>>> Also, as dahdi doesn't start, I have no cli commands, are the ss7 >>>> commands replaced by something? >>>> >>>> Kind regards, >>>> >>>> Olivier >>>> >>>> system.conf : >>>> span=1,0,0,ccs,hdb3 >>>> bchan=1-15 >>>> dchan=16 >>>> bchan=17-31 >>>> >>>> chan_dahdi.conf : >>>> [channels] >>>> callwaiting=yes >>>> callwaitingcallerid=yes >>>> threewaycalling=yes >>>> transfer=yes >>>> cancallforward=yes >>>> callreturn=yes >>>> echocancel=yes >>>> echocancelwhenbridged=yes >>>> group=1 >>>> callgroup=1 >>>> pickupgroup=1 >>>> >>>> networkindicator=national >>>> >>>> ss7_calling_nai=international >>>> ss7_internationalprefix = 00 >>>> ss7_nationalprefix = >>>> >>>> >>>> signalling = ss7 >>>> ss7type = itu ; or ansi if you are using an ANSI link >>>> >>>> linkset = 1 ; Pick a number for your linkset identifier in >>>> chan_dahdi.conf >>>> >>>> pointcode = 8002 >>>> adjpointcode = 3353 >>>> defaultdpc = 3353 >>>> >>>> cicbeginswith = 1 ; Number to start counting the CICs from. So if >>>> Zap/1 to >>>> channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15 >>>> cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 >>>> so we initialize >>>> ; cicbeginswith to 17 before we declare those channels >>>> channel = 17-31 ; This assigns CICs 17-31 to channels 17-31 >>>> sigchan = 16 ; This is where you declare which Zap channel is your >>>> signalling >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Joseph a ?crit : >>>>> On 08/01/08, olivier taylor wrote: >>>>> >>>>>> Hi all, >>>>>> >>>>>> Installed : >>>>>> dahdi-complete >>>>>> zaptel 1.4.11 >>>>>> libss7-trunk >>>>>> When compiling libss7, I get : >>>>>> >>>>>> gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread >>>>>> ss7linktest.c: In function ?zap_open?: >>>>>> ss7linktest.c:200: error: ?DAHDI_BUFFERINFO? undeclared (first >>>>>> use in >>>>>> this function) >>>>>> ss7linktest.c:200: error: (Each undeclared identifier is reported >>>>>> only once >>>>>> ss7linktest.c:200: error: for each function it appears in.) >>>>>> ss7linktest.c:200: error: expected ?;? before ?bi? >>>>>> ss7linktest.c:207: error: ?bi? undeclared (first use in this >>>>>> function) >>>>>> make: *** [ss7linktest] Error 1 >>>>>> >>>>>> Any idea of what's wrong? >>>>>> >>>>> >>>>> You need to use dahdi instead of zaptel. >>>>> >>>>> >>>>> ------------------------------------------------------------------------ >>>>> >>>>> >>>>> _______________________________________________ >>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>>>> >>>>> asterisk-ss7 mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>> ------------------------------------------------------------------------ >>>> >>>> >>>> _______________________________________________ >>>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>>> >>>> asterisk-ss7 mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>> >>> >> > >
|