Okido, it works perfectly again, Thx Matthew, you are the source for SS7. Best regards, Olivier Matthew Fredrickson a ?crit : > olivier taylor wrote: >> Okido, I have then to uninstall zaptel? >> >> For dahdi, it's installed, but I am lost with the configurations files. >> Previously, I had libss7 working (before the need to use dahdi, and >> had no problems. >> >> Are the zaptel and zapata files similar to dahdi/system.conf and >> chan_dahdi.conf? > > Exact same syntax should get you up and running. Copy /etc/zaptel.conf > to /etc/dahdi/system.conf and /etc/asterisk/zapata.conf to > /etc/asterisk/chan_dahdi.conf. > > Make sure you also are using a fairly recent version of dahdi (I'd > just update it to latest, unless you checked it out less than a week > or so ago). > > Matthew Fredrickson >> >> When starting, I have now"chan_dahdi.c:12843 linkset_addsigchan: >> Invalid networkindicator!" >> >> Also, as dahdi doesn't start, I have no cli commands, are the ss7 >> commands replaced by something? >> >> Kind regards, >> >> Olivier >> >> system.conf : >> span=1,0,0,ccs,hdb3 >> bchan=1-15 >> dchan=16 >> bchan=17-31 >> >> chan_dahdi.conf : >> [channels] >> callwaiting=yes >> callwaitingcallerid=yes >> threewaycalling=yes >> transfer=yes >> cancallforward=yes >> callreturn=yes >> echocancel=yes >> echocancelwhenbridged=yes >> group=1 >> callgroup=1 >> pickupgroup=1 >> >> networkindicator=national >> >> ss7_calling_nai=international >> ss7_internationalprefix = 00 >> ss7_nationalprefix = >> >> >> signalling = ss7 >> ss7type = itu ; or ansi if you are using an ANSI link >> >> linkset = 1 ; Pick a number for your linkset identifier in >> chan_dahdi.conf >> >> pointcode = 8002 >> adjpointcode = 3353 >> defaultdpc = 3353 >> >> cicbeginswith = 1 ; Number to start counting the CICs from. So if >> Zap/1 to >> channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15 >> cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 so >> we initialize >> ; cicbeginswith to 17 before we declare those channels >> channel = 17-31 ; This assigns CICs 17-31 to channels 17-31 >> sigchan = 16 ; This is where you declare which Zap channel is your >> signalling >> >> >> >> >> >> >> >> >> >> >> >> Joseph a ?crit : >>> On 08/01/08, olivier taylor wrote: >>> >>>> Hi all, >>>> >>>> Installed : >>>> dahdi-complete >>>> zaptel 1.4.11 >>>> libss7-trunk >>>> When compiling libss7, I get : >>>> >>>> gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread >>>> ss7linktest.c: In function ?zap_open?: >>>> ss7linktest.c:200: error: ?DAHDI_BUFFERINFO? undeclared (first use in >>>> this function) >>>> ss7linktest.c:200: error: (Each undeclared identifier is reported >>>> only once >>>> ss7linktest.c:200: error: for each function it appears in.) >>>> ss7linktest.c:200: error: expected ?;? before ?bi? >>>> ss7linktest.c:207: error: ?bi? undeclared (first use in this function) >>>> make: *** [ss7linktest] Error 1 >>>> >>>> Any idea of what's wrong? >>>> >>> >>> You need to use dahdi instead of zaptel. >>> >>> >>> ------------------------------------------------------------------------ >>> >>> >>> _______________________________________________ >>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>> >>> asterisk-ss7 mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > >
|