olivier taylor wrote: > Okido, it works perfectly again, Thx Matthew, you are the source for SS7. If you're using a Digium card, you might change your dchan= line to mtp2= in /etc/system/dahdi.conf for better signalling channel reliability. Matthew Fredrickson > > Best regards, > > Olivier > > Matthew Fredrickson a ?crit : >> olivier taylor wrote: >>> Okido, I have then to uninstall zaptel? >>> >>> For dahdi, it's installed, but I am lost with the configurations files. >>> Previously, I had libss7 working (before the need to use dahdi, and >>> had no problems. >>> >>> Are the zaptel and zapata files similar to dahdi/system.conf and >>> chan_dahdi.conf? >> >> Exact same syntax should get you up and running. Copy >> /etc/zaptel.conf to /etc/dahdi/system.conf and >> /etc/asterisk/zapata.conf to /etc/asterisk/chan_dahdi.conf. >> >> Make sure you also are using a fairly recent version of dahdi (I'd >> just update it to latest, unless you checked it out less than a week >> or so ago). >> >> Matthew Fredrickson >>> >>> When starting, I have now"chan_dahdi.c:12843 linkset_addsigchan: >>> Invalid networkindicator!" >>> >>> Also, as dahdi doesn't start, I have no cli commands, are the ss7 >>> commands replaced by something? >>> >>> Kind regards, >>> >>> Olivier >>> >>> system.conf : >>> span=1,0,0,ccs,hdb3 >>> bchan=1-15 >>> dchan=16 >>> bchan=17-31 >>> >>> chan_dahdi.conf : >>> [channels] >>> callwaiting=yes >>> callwaitingcallerid=yes >>> threewaycalling=yes >>> transfer=yes >>> cancallforward=yes >>> callreturn=yes >>> echocancel=yes >>> echocancelwhenbridged=yes >>> group=1 >>> callgroup=1 >>> pickupgroup=1 >>> >>> networkindicator=national >>> >>> ss7_calling_nai=international >>> ss7_internationalprefix = 00 >>> ss7_nationalprefix = >>> >>> >>> signalling = ss7 >>> ss7type = itu ; or ansi if you are using an ANSI link >>> >>> linkset = 1 ; Pick a number for your linkset identifier in >>> chan_dahdi.conf >>> >>> pointcode = 8002 >>> adjpointcode = 3353 >>> defaultdpc = 3353 >>> >>> cicbeginswith = 1 ; Number to start counting the CICs from. So if >>> Zap/1 to >>> channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15 >>> cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 >>> so we initialize >>> ; cicbeginswith to 17 before we declare those channels >>> channel = 17-31 ; This assigns CICs 17-31 to channels 17-31 >>> sigchan = 16 ; This is where you declare which Zap channel is your >>> signalling >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> Joseph a ?crit : >>>> On 08/01/08, olivier taylor wrote: >>>> >>>>> Hi all, >>>>> >>>>> Installed : >>>>> dahdi-complete >>>>> zaptel 1.4.11 >>>>> libss7-trunk >>>>> When compiling libss7, I get : >>>>> >>>>> gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread >>>>> ss7linktest.c: In function ?zap_open?: >>>>> ss7linktest.c:200: error: ?DAHDI_BUFFERINFO? undeclared (first use in >>>>> this function) >>>>> ss7linktest.c:200: error: (Each undeclared identifier is reported >>>>> only once >>>>> ss7linktest.c:200: error: for each function it appears in.) >>>>> ss7linktest.c:200: error: expected ?;? before ?bi? >>>>> ss7linktest.c:207: error: ?bi? undeclared (first use in this >>>>> function) >>>>> make: *** [ss7linktest] Error 1 >>>>> >>>>> Any idea of what's wrong? >>>>> >>>> >>>> You need to use dahdi instead of zaptel. >>>> >>>> >>>> ------------------------------------------------------------------------ >>>> >>>> >>>> _______________________________________________ >>>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>>> >>>> asterisk-ss7 mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>> ------------------------------------------------------------------------ >>> >>> >>> _______________________________________________ >>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>> >>> asterisk-ss7 mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> >> >
|