olivier taylor wrote: > Okido, I have then to uninstall zaptel? > > For dahdi, it's installed, but I am lost with the configurations files. > Previously, I had libss7 working (before the need to use dahdi, and > had no problems. > > Are the zaptel and zapata files similar to dahdi/system.conf and > chan_dahdi.conf? Exact same syntax should get you up and running. Copy /etc/zaptel.conf to /etc/dahdi/system.conf and /etc/asterisk/zapata.conf to /etc/asterisk/chan_dahdi.conf. Make sure you also are using a fairly recent version of dahdi (I'd just update it to latest, unless you checked it out less than a week or so ago). Matthew Fredrickson > > When starting, I have now"chan_dahdi.c:12843 linkset_addsigchan: > Invalid networkindicator!" > > Also, as dahdi doesn't start, I have no cli commands, are the ss7 > commands replaced by something? > > Kind regards, > > Olivier > > system.conf : > span=1,0,0,ccs,hdb3 > bchan=1-15 > dchan=16 > bchan=17-31 > > chan_dahdi.conf : > [channels] > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > group=1 > callgroup=1 > pickupgroup=1 > > networkindicator=national > > ss7_calling_nai=international > ss7_internationalprefix = 00 > ss7_nationalprefix = > > > signalling = ss7 > ss7type = itu ; or ansi if you are using an ANSI link > > linkset = 1 ; Pick a number for your linkset identifier in chan_dahdi.conf > > pointcode = 8002 > adjpointcode = 3353 > defaultdpc = 3353 > > cicbeginswith = 1 ; Number to start counting the CICs from. So if Zap/1 to > channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15 > cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 so > we initialize > ; cicbeginswith to 17 before we declare those channels > channel = 17-31 ; This assigns CICs 17-31 to channels 17-31 > sigchan = 16 ; This is where you declare which Zap channel is your > signalling > > > > > > > > > > > > Joseph a ?crit : >> On 08/01/08, olivier taylor wrote: >> >>> Hi all, >>> >>> Installed : >>> dahdi-complete >>> zaptel 1.4.11 >>> libss7-trunk >>> When compiling libss7, I get : >>> >>> gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread >>> ss7linktest.c: In function ?zap_open?: >>> ss7linktest.c:200: error: ?DAHDI_BUFFERINFO? undeclared (first use in >>> this function) >>> ss7linktest.c:200: error: (Each undeclared identifier is reported only once >>> ss7linktest.c:200: error: for each function it appears in.) >>> ss7linktest.c:200: error: expected ?;? before ?bi? >>> ss7linktest.c:207: error: ?bi? undeclared (first use in this function) >>> make: *** [ss7linktest] Error 1 >>> >>> Any idea of what's wrong? >>> >> >> You need to use dahdi instead of zaptel. >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|