----- Original Message ----- > Works great for me! Thanks. > > Does anyone have a beaglebone white? I'm still worried that this fix > will break that board. Works okay on the Beaglebone White using the F21 TC1 Minimal image. Hit a couple of errors at the beginning, but the system came up fine. U-Boot SPL 2014.10 (Nov 11 2014 - 07:35:06) No AC power, disabling frequency switch MMC: block number 0x100 exceeds max(0x0) MMC: block number 0x200 exceeds max(0x0) *** Error - No Valid Environment Area found Using default environment ... Paul > > > Adam > > > On Thu, Nov 13, 2014 at 7:13 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: > > Hi Adam, > > > > Problem should now be fixed with -5 > > > > Can you test and provide karma so we can get it in GA. > > > > https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-2014.10-5.fc21 > > > > On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode <adam@xxxxxxxxxxxxx> wrote: > >> This is still present with -3. It looks like this version of U-Boot is > >> not capable of booting from the internal eMMC on beaglebone black. > >> > >> U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) > >> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear > >> spl: mmc init failed: err - -19 > >> ### ERROR ### Please RESET the board ### > >> > >> > >> I found at least another thread about this issue, from version 2014.07: > >> https://www.mail-archive.com/meta-ti@xxxxxxxxxxxxxxxx/msg04279.html > >> > >> > >> Adam > >> > >> On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson <pbrobinson@xxxxxxxxx> > >> wrote: > >>> A minor bug and is fixed in uboot-tools-2014.10-3.fc21 > >>> > >>> Peter > >>> > >>> On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode <adam@xxxxxxxxxxxxx> wrote: > >>>> Hopefully I did something wrong, but it's not working at all for me on > >>>> the beaglebone black: > >>>> > >>>> Here is what I get when I try to boot from eMMC: > >>>> > >>>> U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) > >>>> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear > >>>> spl: mmc init failed: err - -19 > >>>> ### ERROR ### Please RESET the board ### > >>>> > >>>> > >>>> > >>>> Here is what I get when I make a new SD card from the latest minimal > >>>> image: > >>>> > >>>> > >>>> U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) > >>>> > >>>> Watchdog enabled > >>>> I2C: ready > >>>> DRAM: 512 MiB > >>>> NAND: 0 MiB > >>>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > >>>> *** Error - No Valid Environment Area found > >>>> *** Warning - bad CRC, using default environment > >>>> > >>>> Net: <ethaddr> not set. Validating first E-fuse MAC > >>>> cpsw, usb_ether > >>>> Hit any key to stop autoboot: 0 > >>>> switch to partitions #0, OK > >>>> mmc0 is current device > >>>> Scanning mmc 0:2... > >>>> Failed to mount ext2 filesystem... > >>>> ** Unrecognized filesystem type ** > >>>> Failed to mount ext2 filesystem... > >>>> ** Unrecognized filesystem type ** > >>>> Failed to mount ext2 filesystem... > >>>> ** Unrecognized filesystem type ** > >>>> Failed to mount ext2 filesystem... > >>>> ** Unrecognized filesystem type ** > >>>> Failed to mount ext2 filesystem... > >>>> ** Unrecognized filesystem type ** > >>>> Failed to mount ext2 filesystem... > >>>> ** Unrecognized filesystem type ** > >>>> Failed to mount ext2 filesystem... > >>>> ** Unrecognized filesystem type ** > >>>> Failed to mount ext2 filesystem... > >>>> ** Unrecognized filesystem type ** > >>>> Card did not respond to voltage select! > >>>> Booting from nand ... > >>>> > >>>> no devices available > >>>> > >>>> no devices available > >>>> Bad Linux ARM zImage magic! > >>>> > >>>> > >>>> > >>>> > >>>> When I am in the uboot command processor, I cannot select the internal > >>>> eMMC at all: > >>>> > >>>> U-Boot# mmc dev 1 > >>>> Card did not respond to voltage select! > >>>> > >>>> > >>>> > >>>> Previously, I was booting with no problems from either eMMC or SD with > >>>> F21. > >>>> > >>>> > >>>> > >>>> Thanks, > >>>> > >>>> Adam > >>>> > >>>> > >>>> On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson@xxxxxxxxx> > >>>> wrote: > >>>>> Hi All, > >>>>> > >>>>> Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21. > >>>>> > >>>>> https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21 > >>>>> > >>>>> This release contains numerous fixes and improvements over the > >>>>> currently shipping release including, but by no means limited to: > >>>>> * Upstream generic distro support (huge thanks to Dennis Gilmore and > >>>>> Steven Warren for their tireless work to get this upstream > >>>>> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for > >>>>> this tireless work on this) > >>>>> * Numerous other improvements too long to name. > >>>>> > >>>>> New devices that we now enable in this release, in no particular order, > >>>>> include: > >>>>> > >>>>> AllWinner: > >>>>> A10-OLinuXino-Lime > >>>>> A10s-OLinuXino-M > >>>>> A13-OLinuXino > >>>>> A13-OLinuXinoM > >>>>> A20-OLinuXino_MICRO > >>>>> Bananapi > >>>>> Cubieboard > >>>>> Cubieboard2 > >>>>> Cubietruck > >>>>> Mele_A1000 > >>>>> Mele_A1000G > >>>>> Mini-X > >>>>> Mini-X-1Gb > >>>>> > >>>>> Tegra: > >>>>> jetson-tk1 > >>>>> > >>>>> i.MX6 > >>>>> cm_fx6 (Utilite) > >>>>> riotboard > >>>>> > >>>>> It's not yet in nightly builds but I'm going to request it for the > >>>>> next Beta TC compose. > >>>>> > >>>>> Known issues: > >>>>> * Panda is not yet ported to generic distro support > >>>>> > >>>>> Please test and provide feedback. > >>>>> > >>>>> Peter > >>>>> _______________________________________________ > >>>>> arm mailing list > >>>>> arm@xxxxxxxxxxxxxxxxxxxxxxx > >>>>> https://admin.fedoraproject.org/mailman/listinfo/arm > _______________________________________________ > arm mailing list > arm@xxxxxxxxxxxxxxxxxxxxxxx > https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
