Hopefully I did something wrong, but it's not working at all for me on
the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
spl: mmc init failed: err - -19
### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Error - No Valid Environment Area found
*** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Card did not respond to voltage select!
Booting from nand ...
no devices available
no devices available
Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal
eMMC at all:
U-Boot# mmc dev 1
Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote:
> Hi All,
>
> Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
>
> https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
>
> This release contains numerous fixes and improvements over the
> currently shipping release including, but by no means limited to:
> * Upstream generic distro support (huge thanks to Dennis Gilmore and
> Steven Warren for their tireless work to get this upstream
> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
> this tireless work on this)
> * Numerous other improvements too long to name.
>
> New devices that we now enable in this release, in no particular order, include:
>
> AllWinner:
> A10-OLinuXino-Lime
> A10s-OLinuXino-M
> A13-OLinuXino
> A13-OLinuXinoM
> A20-OLinuXino_MICRO
> Bananapi
> Cubieboard
> Cubieboard2
> Cubietruck
> Mele_A1000
> Mele_A1000G
> Mini-X
> Mini-X-1Gb
>
> Tegra:
> jetson-tk1
>
> i.MX6
> cm_fx6 (Utilite)
> riotboard
>
> It's not yet in nightly builds but I'm going to request it for the
> next Beta TC compose.
>
> Known issues:
> * Panda is not yet ported to generic distro support
>
> Please test and provide feedback.
>
> Peter
> _______________________________________________
> arm mailing list
> arm@xxxxxxxxxxxxxxxxxxxxxxx
> https://admin.fedoraproject.org/mailman/listinfo/arm
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
