Hi Adam, Problem should now be fixed with -5 Can you test and provide karma so we can get it in GA. https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-2014.10-5.fc21 On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode <adam@xxxxxxxxxxxxx> wrote: > This is still present with -3. It looks like this version of U-Boot is > not capable of booting from the internal eMMC on beaglebone black. > > U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) > omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear > spl: mmc init failed: err - -19 > ### ERROR ### Please RESET the board ### > > > I found at least another thread about this issue, from version 2014.07: > https://www.mail-archive.com/meta-ti@xxxxxxxxxxxxxxxx/msg04279.html > > > Adam > > On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: >> A minor bug and is fixed in uboot-tools-2014.10-3.fc21 >> >> Peter >> >> On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode <adam@xxxxxxxxxxxxx> wrote: >>> Hopefully I did something wrong, but it's not working at all for me on >>> the beaglebone black: >>> >>> Here is what I get when I try to boot from eMMC: >>> >>> U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) >>> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear >>> spl: mmc init failed: err - -19 >>> ### ERROR ### Please RESET the board ### >>> >>> >>> >>> Here is what I get when I make a new SD card from the latest minimal image: >>> >>> >>> U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) >>> >>> Watchdog enabled >>> I2C: ready >>> DRAM: 512 MiB >>> NAND: 0 MiB >>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >>> *** Error - No Valid Environment Area found >>> *** Warning - bad CRC, using default environment >>> >>> Net: <ethaddr> not set. Validating first E-fuse MAC >>> cpsw, usb_ether >>> Hit any key to stop autoboot: 0 >>> switch to partitions #0, OK >>> mmc0 is current device >>> Scanning mmc 0:2... >>> Failed to mount ext2 filesystem... >>> ** Unrecognized filesystem type ** >>> Failed to mount ext2 filesystem... >>> ** Unrecognized filesystem type ** >>> Failed to mount ext2 filesystem... >>> ** Unrecognized filesystem type ** >>> Failed to mount ext2 filesystem... >>> ** Unrecognized filesystem type ** >>> Failed to mount ext2 filesystem... >>> ** Unrecognized filesystem type ** >>> Failed to mount ext2 filesystem... >>> ** Unrecognized filesystem type ** >>> Failed to mount ext2 filesystem... >>> ** Unrecognized filesystem type ** >>> Failed to mount ext2 filesystem... >>> ** Unrecognized filesystem type ** >>> Card did not respond to voltage select! >>> Booting from nand ... >>> >>> no devices available >>> >>> no devices available >>> Bad Linux ARM zImage magic! >>> >>> >>> >>> >>> When I am in the uboot command processor, I cannot select the internal >>> eMMC at all: >>> >>> U-Boot# mmc dev 1 >>> Card did not respond to voltage select! >>> >>> >>> >>> Previously, I was booting with no problems from either eMMC or SD with F21. >>> >>> >>> >>> Thanks, >>> >>> Adam >>> >>> >>> On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: >>>> Hi All, >>>> >>>> Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21. >>>> >>>> https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21 >>>> >>>> This release contains numerous fixes and improvements over the >>>> currently shipping release including, but by no means limited to: >>>> * Upstream generic distro support (huge thanks to Dennis Gilmore and >>>> Steven Warren for their tireless work to get this upstream >>>> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for >>>> this tireless work on this) >>>> * Numerous other improvements too long to name. >>>> >>>> New devices that we now enable in this release, in no particular order, include: >>>> >>>> AllWinner: >>>> A10-OLinuXino-Lime >>>> A10s-OLinuXino-M >>>> A13-OLinuXino >>>> A13-OLinuXinoM >>>> A20-OLinuXino_MICRO >>>> Bananapi >>>> Cubieboard >>>> Cubieboard2 >>>> Cubietruck >>>> Mele_A1000 >>>> Mele_A1000G >>>> Mini-X >>>> Mini-X-1Gb >>>> >>>> Tegra: >>>> jetson-tk1 >>>> >>>> i.MX6 >>>> cm_fx6 (Utilite) >>>> riotboard >>>> >>>> It's not yet in nightly builds but I'm going to request it for the >>>> next Beta TC compose. >>>> >>>> Known issues: >>>> * Panda is not yet ported to generic distro support >>>> >>>> Please test and provide feedback. >>>> >>>> Peter >>>> _______________________________________________ >>>> arm mailing list >>>> arm@xxxxxxxxxxxxxxxxxxxxxxx >>>> https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
