This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black. U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ### I found at least another thread about this issue, from version 2014.07: https://www.mail-archive.com/meta-ti@xxxxxxxxxxxxxxxx/msg04279.html Adam On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: > A minor bug and is fixed in uboot-tools-2014.10-3.fc21 > > Peter > > On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode <adam@xxxxxxxxxxxxx> wrote: >> Hopefully I did something wrong, but it's not working at all for me on >> the beaglebone black: >> >> Here is what I get when I try to boot from eMMC: >> >> U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) >> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear >> spl: mmc init failed: err - -19 >> ### ERROR ### Please RESET the board ### >> >> >> >> Here is what I get when I make a new SD card from the latest minimal image: >> >> >> U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) >> >> Watchdog enabled >> I2C: ready >> DRAM: 512 MiB >> NAND: 0 MiB >> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> *** Error - No Valid Environment Area found >> *** Warning - bad CRC, using default environment >> >> Net: <ethaddr> not set. Validating first E-fuse MAC >> cpsw, usb_ether >> Hit any key to stop autoboot: 0 >> switch to partitions #0, OK >> mmc0 is current device >> Scanning mmc 0:2... >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Card did not respond to voltage select! >> Booting from nand ... >> >> no devices available >> >> no devices available >> Bad Linux ARM zImage magic! >> >> >> >> >> When I am in the uboot command processor, I cannot select the internal >> eMMC at all: >> >> U-Boot# mmc dev 1 >> Card did not respond to voltage select! >> >> >> >> Previously, I was booting with no problems from either eMMC or SD with F21. >> >> >> >> Thanks, >> >> Adam >> >> >> On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: >>> Hi All, >>> >>> Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21. >>> >>> https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21 >>> >>> This release contains numerous fixes and improvements over the >>> currently shipping release including, but by no means limited to: >>> * Upstream generic distro support (huge thanks to Dennis Gilmore and >>> Steven Warren for their tireless work to get this upstream >>> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for >>> this tireless work on this) >>> * Numerous other improvements too long to name. >>> >>> New devices that we now enable in this release, in no particular order, include: >>> >>> AllWinner: >>> A10-OLinuXino-Lime >>> A10s-OLinuXino-M >>> A13-OLinuXino >>> A13-OLinuXinoM >>> A20-OLinuXino_MICRO >>> Bananapi >>> Cubieboard >>> Cubieboard2 >>> Cubietruck >>> Mele_A1000 >>> Mele_A1000G >>> Mini-X >>> Mini-X-1Gb >>> >>> Tegra: >>> jetson-tk1 >>> >>> i.MX6 >>> cm_fx6 (Utilite) >>> riotboard >>> >>> It's not yet in nightly builds but I'm going to request it for the >>> next Beta TC compose. >>> >>> Known issues: >>> * Panda is not yet ported to generic distro support >>> >>> Please test and provide feedback. >>> >>> Peter >>> _______________________________________________ >>> arm mailing list >>> arm@xxxxxxxxxxxxxxxxxxxxxxx >>> https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
