Works great for me! Thanks. Does anyone have a beaglebone white? I'm still worried that this fix will break that board. Adam On Thu, Nov 13, 2014 at 7:13 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: > Hi Adam, > > Problem should now be fixed with -5 > > Can you test and provide karma so we can get it in GA. > > https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-2014.10-5.fc21 > > On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode <adam@xxxxxxxxxxxxx> wrote: >> This is still present with -3. It looks like this version of U-Boot is >> not capable of booting from the internal eMMC on beaglebone black. >> >> U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) >> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear >> spl: mmc init failed: err - -19 >> ### ERROR ### Please RESET the board ### >> >> >> I found at least another thread about this issue, from version 2014.07: >> https://www.mail-archive.com/meta-ti@xxxxxxxxxxxxxxxx/msg04279.html >> >> >> Adam >> >> On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: >>> A minor bug and is fixed in uboot-tools-2014.10-3.fc21 >>> >>> Peter >>> >>> On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode <adam@xxxxxxxxxxxxx> wrote: >>>> Hopefully I did something wrong, but it's not working at all for me on >>>> the beaglebone black: >>>> >>>> Here is what I get when I try to boot from eMMC: >>>> >>>> U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) >>>> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear >>>> spl: mmc init failed: err - -19 >>>> ### ERROR ### Please RESET the board ### >>>> >>>> >>>> >>>> Here is what I get when I make a new SD card from the latest minimal image: >>>> >>>> >>>> U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) >>>> >>>> Watchdog enabled >>>> I2C: ready >>>> DRAM: 512 MiB >>>> NAND: 0 MiB >>>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >>>> *** Error - No Valid Environment Area found >>>> *** Warning - bad CRC, using default environment >>>> >>>> Net: <ethaddr> not set. Validating first E-fuse MAC >>>> cpsw, usb_ether >>>> Hit any key to stop autoboot: 0 >>>> switch to partitions #0, OK >>>> mmc0 is current device >>>> Scanning mmc 0:2... >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Card did not respond to voltage select! >>>> Booting from nand ... >>>> >>>> no devices available >>>> >>>> no devices available >>>> Bad Linux ARM zImage magic! >>>> >>>> >>>> >>>> >>>> When I am in the uboot command processor, I cannot select the internal >>>> eMMC at all: >>>> >>>> U-Boot# mmc dev 1 >>>> Card did not respond to voltage select! >>>> >>>> >>>> >>>> Previously, I was booting with no problems from either eMMC or SD with F21. >>>> >>>> >>>> >>>> Thanks, >>>> >>>> Adam >>>> >>>> >>>> On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: >>>>> Hi All, >>>>> >>>>> Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21. >>>>> >>>>> https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21 >>>>> >>>>> This release contains numerous fixes and improvements over the >>>>> currently shipping release including, but by no means limited to: >>>>> * Upstream generic distro support (huge thanks to Dennis Gilmore and >>>>> Steven Warren for their tireless work to get this upstream >>>>> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for >>>>> this tireless work on this) >>>>> * Numerous other improvements too long to name. >>>>> >>>>> New devices that we now enable in this release, in no particular order, include: >>>>> >>>>> AllWinner: >>>>> A10-OLinuXino-Lime >>>>> A10s-OLinuXino-M >>>>> A13-OLinuXino >>>>> A13-OLinuXinoM >>>>> A20-OLinuXino_MICRO >>>>> Bananapi >>>>> Cubieboard >>>>> Cubieboard2 >>>>> Cubietruck >>>>> Mele_A1000 >>>>> Mele_A1000G >>>>> Mini-X >>>>> Mini-X-1Gb >>>>> >>>>> Tegra: >>>>> jetson-tk1 >>>>> >>>>> i.MX6 >>>>> cm_fx6 (Utilite) >>>>> riotboard >>>>> >>>>> It's not yet in nightly builds but I'm going to request it for the >>>>> next Beta TC compose. >>>>> >>>>> Known issues: >>>>> * Panda is not yet ported to generic distro support >>>>> >>>>> Please test and provide feedback. >>>>> >>>>> Peter >>>>> _______________________________________________ >>>>> arm mailing list >>>>> arm@xxxxxxxxxxxxxxxxxxxxxxx >>>>> https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
