On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote: > > > On 10/16/19 11:48 AM, Mihaita Ivascu wrote: > > On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote: > >> > >> On 10/16/19 11:21 AM, Mihaita Ivascu wrote: > >>> Hello, > >>> > >>> Thanks for your answer. Yes i am able to connect via PUTTY to the target. > >>> Then I should use some adb commands in order to push the new > >>> barebox/firmware ? do you know where I could find some examples? > >> > >> fastboot device -l works normally on Linux. You need to check what you need > >> to do on Windows to do the same. You should only need the Fastboot utility > >> for this. > >> > > [mi] Yes I have both fastboot and adb installed on both Windows and > > Linux machines. In both cases it does not list any device. > > The board is detected as fastboot android is windows device > > manager. But the fastboot and adb does not list it. same for Linux. > > Please see attachment > > Let's focus on Linux. You don't see a device there? > What does barebox say? Does it say 'multi_bind: creating Fastboot function'? > What does you Linux host's dmesg say? barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ usbgadget -aA udc0: registering UDC driver [g_multi] multi_bind: creating Fastboot function multi_bind: creating ACM function g_multi usbgadget: Multifunction Composite Gadget g_multi usbgadget: userspace failed to provide iSerialNumber g_multi usbgadget: g_multi ready barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ g_multi usbgadget: high-speed config #1: Multifunction Composite Gadget dmesg: [ 25.602275] usb 1-1.3: USB disconnect, device number 3 [ 28.359930] usb 1-1.3: new high-speed USB device number 5 using ehci-pci [ 28.452971] usb 1-1.3: New USB device found, idVendor=1d6b, idProduct=0104 [ 28.452976] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 28.452980] usb 1-1.3: Product: Phytec phyCORE-i.MX6 Ultra Lite SOM [ 28.457925] cdc_acm 1-1.3:1.1: ttyACM0: USB ACM device So I see the device on Linux. But fastboot does not list any device on Linux. > > > > > >>> > >>> Also I have a question: purpose of this activity is for me to be > >>> able to flash some imx6ul boards that have no firmware: no barebox. > >>> So I know hardware config for the port is otg mode but as I have no > >>> barebox running them before I am wondering if I will be able to > >>> connect via PUTTY if I do not set the ACM gadget from barebox? > >> > >> Check the Embest MarS board's environment in barebox master. It sets up > >> a fastboot gadget automatically on boot from imx-usb-loader. > >> You can adjust it to your liking. > > > > [mi] I was not able to find any docs about this board. I will keep > > searching/asking in the nxp community. If you have already ahve any > > files related to it would be helpful. Thanks > > It's in the barebox next branch (not master, sorry), see here: > https://github.com/saschahauer/barebox/blob/next/arch/arm/boards/embest-marsboard/defaultenv-mars/init/fastboot > > You can copy and adjust the environment setup for your board. > > >> > >> Cheers > >> Ahmad > >> > >>> > >>> Thanks, > >>> Mihaita > >>> > >>> On Wed, Oct 16, 2019 at 10:51 AM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote: > >>>> > >>>> On 10/16/19 10:40 AM, Mihaita Ivascu wrote: > >>>>> Hello again, > >>>>> > >>>>> I have the target in otg peripheral mode, ADB and fastboot drivers > >>>>> installed but fastboot does not list any device. The board is detected > >>>>> in device manager > >>>> > >>>> Try enabling the ACM gadget in barebox and connect with PuTTY and see if > >>>> at least that works. It worked for me on Windows with another i.MX board > >>>> a month ago. > >>>> > >>>> As for fastboot, I don't know how to configure it on Windows, but surely > >>>> Android Modding boards will have you covered there. > >>>> > >>>>> Please see attachment. Any ideas how should I proceed? Thanks for > >>>>> the support. > >>>> > >>>> You can enable the ACM gadget in barebox and see if that works, I tested > >>>> it on Windows with an i.MX board a month ago > >>>> > >>>> Cheers > >>>> Ahmad > >>>> > >>>>> > >>>>> Thanks, > >>>>> Mihaita > >>>>> > >>>>> On Wed, Oct 16, 2019 at 9:32 AM Mihaita Ivascu > >>>>> <mihaita_ivascu@xxxxxxxxxxx> wrote: > >>>>>> > >>>>>> Thanks. I have installed ADB and fastboot drivers for Win from > >>>>>> https://www.getdroidtips.com/how-to-install-adb-and-fastboot-on-windows/ > >>>>>> I have installed according to the attachment. > >>>>>> But is not recognized in Windows. I did reboot the system after > >>>>>> installation but did not add any new env variable. > >>>>>> > >>>>>> H:\>fastboot devices -l > >>>>>> 'fastboot' is not recognized as an internal or external command, > >>>>>> operable program or batch file. > >>>>>> > >>>>>> Thanks, > >>>>>> Mihaita > >>>>>> > >>>>>> > >>>>>> On Tue, Oct 15, 2019 at 4:44 PM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote: > >>>>>>> > >>>>>>> On 10/15/19 4:41 PM, Mihaita Ivascu wrote: > >>>>>>>> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l > >>>>>>> That's what you run on your host system, not on the target. > >>>>>>> -- > >>>>>>> Pengutronix e.K. | | > >>>>>>> Industrial Linux Solutions | http://www.pengutronix.de/ | > >>>>>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > >>>>>>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > >>>> > >>>> > >>>> -- > >>>> Pengutronix e.K. | | > >>>> Industrial Linux Solutions | http://www.pengutronix.de/ | > >>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > >>>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > >>> > >> > >> > >> -- > >> Pengutronix e.K. | | > >> Industrial Linux Solutions | http://www.pengutronix.de/ | > >> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
