Re: MFGTools from NXP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
>
> On 10/16/19 11:21 AM, Mihaita Ivascu wrote:
> > Hello,
> >
> >    Thanks for your answer. Yes i am able to connect via PUTTY to the target.
> >    Then I should use some adb commands in order to push the new
> > barebox/firmware ? do you know where I could find some examples?
>
> fastboot device -l works normally on Linux. You need to check what you need
> to do on Windows to do the same. You should only need the Fastboot utility
> for this.
>
[mi] Yes I have both fastboot and adb installed on both Windows and
Linux machines. In both cases it does not list any device.
       The board is detected as fastboot android is windows device
manager. But the fastboot and adb does not list it. same for Linux.
Please see attachment

> >
> >    Also I have a question: purpose of this activity is for me to be
> > able to flash some imx6ul boards that have no firmware: no barebox.
> >    So I know hardware config for the port is otg mode but as I have no
> > barebox running them before I am wondering if I will be able to
> > connect via PUTTY if I do not set the ACM gadget from barebox?
>
> Check the Embest MarS board's environment in barebox master. It sets up
> a fastboot gadget automatically on boot from imx-usb-loader.
> You can adjust it to your liking.

  [mi] I was not able to find any docs about this board. I will keep
searching/asking in the nxp community. If you have already ahve any
files related to it would be helpful. Thanks
>
> Cheers
> Ahmad
>
> >
> > Thanks,
> >       Mihaita
> >
> > On Wed, Oct 16, 2019 at 10:51 AM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
> >>
> >> On 10/16/19 10:40 AM, Mihaita Ivascu wrote:
> >>> Hello again,
> >>>
> >>>    I have the target in otg peripheral mode, ADB and fastboot drivers
> >>> installed but fastboot does not list any device. The board is detected
> >>> in device manager
> >>
> >> Try enabling the ACM gadget in barebox and connect with PuTTY and see if
> >> at least that works. It worked for me on Windows with another i.MX board
> >> a month ago.
> >>
> >> As for fastboot, I don't know how to configure it on Windows, but surely
> >> Android Modding boards will have you covered there.
> >>
> >>>    Please see attachment. Any ideas how should I proceed? Thanks for
> >>> the support.
> >>
> >> You can enable the ACM gadget in barebox and see if that works, I tested
> >> it on Windows with an i.MX board a month ago
> >>
> >> Cheers
> >> Ahmad
> >>
> >>>
> >>> Thanks,
> >>>       Mihaita
> >>>
> >>> On Wed, Oct 16, 2019 at 9:32 AM Mihaita Ivascu
> >>> <mihaita_ivascu@xxxxxxxxxxx> wrote:
> >>>>
> >>>> Thanks. I have installed ADB and fastboot drivers for Win from
> >>>> https://www.getdroidtips.com/how-to-install-adb-and-fastboot-on-windows/
> >>>> I have installed according to the attachment.
> >>>> But is not recognized in Windows. I did reboot the system after
> >>>> installation but did not add any new env variable.
> >>>>
> >>>> H:\>fastboot devices -l
> >>>> 'fastboot' is not recognized as an internal or external command,
> >>>> operable program or batch file.
> >>>>
> >>>> Thanks,
> >>>>       Mihaita
> >>>>
> >>>>
> >>>> On Tue, Oct 15, 2019 at 4:44 PM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
> >>>>>
> >>>>> On 10/15/19 4:41 PM, Mihaita Ivascu wrote:
> >>>>>> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l
> >>>>> That's what you run on your host system, not on the target.
> >>>>> --
> >>>>> Pengutronix e.K.                           |                             |
> >>>>> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >>>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >>>>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >>
> >>
> >> --
> >> Pengutronix e.K.                           |                             |
> >> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Attachment: fastboot3.PNG
Description: PNG image

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox

[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux