Re: MFGTools from NXP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

   Thanks for your answer. Yes i am able to connect via PUTTY to the target.
   Then I should use some adb commands in order to push the new
barebox/firmware ? do you know where I could find some examples?

   Also I have a question: purpose of this activity is for me to be
able to flash some imx6ul boards that have no firmware: no barebox.
   So I know hardware config for the port is otg mode but as I have no
barebox running them before I am wondering if I will be able to
connect via PUTTY if I do not set the ACM gadget from barebox?

Thanks,
      Mihaita

On Wed, Oct 16, 2019 at 10:51 AM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
>
> On 10/16/19 10:40 AM, Mihaita Ivascu wrote:
> > Hello again,
> >
> >    I have the target in otg peripheral mode, ADB and fastboot drivers
> > installed but fastboot does not list any device. The board is detected
> > in device manager
>
> Try enabling the ACM gadget in barebox and connect with PuTTY and see if
> at least that works. It worked for me on Windows with another i.MX board
> a month ago.
>
> As for fastboot, I don't know how to configure it on Windows, but surely
> Android Modding boards will have you covered there.
>
> >    Please see attachment. Any ideas how should I proceed? Thanks for
> > the support.
>
> You can enable the ACM gadget in barebox and see if that works, I tested
> it on Windows with an i.MX board a month ago
>
> Cheers
> Ahmad
>
> >
> > Thanks,
> >       Mihaita
> >
> > On Wed, Oct 16, 2019 at 9:32 AM Mihaita Ivascu
> > <mihaita_ivascu@xxxxxxxxxxx> wrote:
> >>
> >> Thanks. I have installed ADB and fastboot drivers for Win from
> >> https://www.getdroidtips.com/how-to-install-adb-and-fastboot-on-windows/
> >> I have installed according to the attachment.
> >> But is not recognized in Windows. I did reboot the system after
> >> installation but did not add any new env variable.
> >>
> >> H:\>fastboot devices -l
> >> 'fastboot' is not recognized as an internal or external command,
> >> operable program or batch file.
> >>
> >> Thanks,
> >>       Mihaita
> >>
> >>
> >> On Tue, Oct 15, 2019 at 4:44 PM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
> >>>
> >>> On 10/15/19 4:41 PM, Mihaita Ivascu wrote:
> >>>> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l
> >>> That's what you run on your host system, not on the target.
> >>> --
> >>> Pengutronix e.K.                           |                             |
> >>> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux