Hi Sascha, Thanks for the quick response! I tried imx_v7_defconfig but it seemed to be as ill-suited for what I am trying to do as freescale-mx6-sabresd_defconfig. What I am trying to get is an ELF file that I would be able to use with DS-5 debugger by uploading it directly into RAM and also an image that I would be able to supply to the build-in ROM bootloader. Imx_v7_defconfig specifies TEXT_BASE as 0x0 which isn't much better for the purpose of using DS-5 since that memory is mapped to boot ROM. For now I just ended up setting it up manually to 0x10000000 in menuconfig. Thanks, Andrey On Wed, Jun 11, 2014 at 10:42 PM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: > Hi Andrey, > > On Wed, Jun 11, 2014 at 02:59:53PM -0700, Andrey Smirnov wrote: >> Hello everyone, >> >> I am trying to use barebox on a SabreSD board with i.MX6Q processor >> and seem to be running into problems. One odd thing that I noticed was >> that default configuration, freescale-mx6-sabresd_defconfig, specifies >> TEXT_BASE as 0x08f80000, which is the address mapped to external >> interface module(EIM). At the same time load address specified in >> arch/arm/boards/freescale-mx6-sabresd/lash-header-mx6-sabresd.imxcfg >> is 0x10000000, which is the start of DRAM. Is there some MMU setup >> that accounts for that, that I am missing? > > 0x08f80000 is plain wrong for TEXT_BASE. Probably noone noticed because > the sabresd can be built with imx_v7_defconfig. Please use this config > instead. The individual board configs will be removed soon for boards > which can be built with the imx_v7_defconfig. > > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
