Hi Andrey, On Wed, Jun 11, 2014 at 02:59:53PM -0700, Andrey Smirnov wrote: > Hello everyone, > > I am trying to use barebox on a SabreSD board with i.MX6Q processor > and seem to be running into problems. One odd thing that I noticed was > that default configuration, freescale-mx6-sabresd_defconfig, specifies > TEXT_BASE as 0x08f80000, which is the address mapped to external > interface module(EIM). At the same time load address specified in > arch/arm/boards/freescale-mx6-sabresd/lash-header-mx6-sabresd.imxcfg > is 0x10000000, which is the start of DRAM. Is there some MMU setup > that accounts for that, that I am missing? 0x08f80000 is plain wrong for TEXT_BASE. Probably noone noticed because the sabresd can be built with imx_v7_defconfig. Please use this config instead. The individual board configs will be removed soon for boards which can be built with the imx_v7_defconfig. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
