Re: Bluetooth Headphone Microphone

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 14 Nov 2020 00:21:57 +0100
deloptes via tde-users <users@xxxxxxxxxxxxxxxxxx> wrote:

> In the gnome/gtk/python app I guess there might be issue with some
> hardware and the so called profiles. IF profile is not advertised, it
> would not connect or I read that in some cases the order matters,
> besides BT and PA keep record which device used which profile.
> Sometime it is better to remove the pairing and pair+connect again.
>
> I would be surprised if headphones would have a microphone and do not
> support HSP. Often these HFP/HSP are mixed, but they are different
> however at the bottom it is the same - you have a speaker and
> microphone and bidirectional audio stream. HFP is for mobiles while
> HSP for head sets.
>
> You could easily scan the device for what is supported:
>
> [bluetooth]# devices
> [bluetooth]# info (MAC of device)
> [...]
>         UUID: Headset AG
> (00001112-0000-1000-8000-00805f9b34fb)
>         UUID: Handsfree Audio Gateway
> (0000111f-0000-1000-8000-00805f9b34fb)
> [...]
>
> > I subsequently tested an older LG Tone and found that also works
> > with HFP/HSP.
>
> I guess you already connected with A2DP and now it might be the
> profile of choice for this device unless it is something else we
> don't know now, but if it had a mic it should support also the HSP.
>
> you could also easily (or may be not so easily) connect and
> disconnect via DBUS methods
>
> dbus-send --system --print-reply --dest=org.bluez
> /org/bluez/hci0/dev_00_01_02_03_04_05 org.bluez.Device1.Connect
>
> and look behind the scene what happens
>
> dbus-monitor --system

Out of all that I tested, it included three different Sentry models.
All three include a mic and can answer a phone call, when paired to a
phone. Why their mics would not connect through Bluetooth on the PC, it
must be the electronics inside those headsets, maybe they're just not
recognizing a certain profile.

In the Bluetooth Manager:

A2DP (default) worked fine with all headphones tested.

For the two sets of headphones that successfully work with their mics,
it required the connection be changed to Audio Sink first, then select
the HFP/HSP profile.
____________________________________________________
tde-users mailing list -- users@xxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxx
Web mail archive available at https://mail.trinitydesktop.org/mailman3/hyperkitty/list/users@xxxxxxxxxxxxxxxxxx



[Index of Archives]     [Trinity Devel]     [KDE]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]     [Trinity Desktop Environment]

  Powered by Linux