On 12/20/06, simon@xxxxxxxxxxx <simon@xxxxxxxxxxx> wrote: > Thanks Paul, > Appreciate your quick reply again > > now let me be more clear on my problem. > > I have 2 domains in my organisation. > > 1) kmun.gov.kw > 2) baladia.gov.kw > > > now I was using the kmun.gov.kw domain for all my mails users so users > were sending n recieving mail as user@xxxxxxxxxxxx > > squirrel mail was installed on Linux server A which hosts the kmun.gov.kw > domain > > > now sometime back we got another server and installed linux on it and > decided to use the other domain that is baladia.gov.kw for mail > > so setup sendmail and everything was fine > > then i installed the multilogin plugin (version2.3.2-1.2) on Server A (one > which SQ mail is installed ) and I could use the drop down box n select > the individual domains and login to either server perfectly and everythin > was workin fine > > now recently there was a problem with server B and i had to format the > /usr and /usr/local partions of Server B which host the baladia.gov.kw > domain . > but the squirrel mail server was perfect as b4 > > now the problem was when i send a mail from outlook the mail is received > as username@xxxxxxxxxxxxxx which is perfect > > but when i log in through SQ mail and send mail the mail is received as > username@xxxxxxxxxxx and not as username@xxxxxxxxxxxxxx > also if i check the maillog of baladia mail server there is no log entry > but i see a log entry on kmun server ( the one where SQ mail is installed) OK, thanks for the careful explanation. If you want to be sending mails through the sendmail or SMTP server on baladia.gov.kw then you have to add the $smtpServerAddress or $sendmail_path and associated settings to the Multilogin settings for the server. But I think before, you were always only sending mail through the kmun.gov.kw server, but your domain setting (or personal preferences email setting) was helping the messages go out with the right domain on them. You should try to make sure you get the domain setting right again. > here below is my config file for the multiplugin login > > $IMAPSelections = array( > > 'KMUN' => array( > 'imapServerAddress' => '62.150.152.1', > 'imapPort' => '143', > 'data_dir' => '/var/www/html/squirrelmail-1.4.4/data', > ), > > 'BALADIA' => array( > 'imapServerAddress' => '62.150.152.2', > 'imapPort' => '143', > // 'org_title' => 'KUWAIT-MUNICIPALITY', > 'data_dir' => '/var/data', You should put the domain setting in each one. > and here below r the data_dir permisons >From what I understand, there is not a data directory problem any more. > the server where SQ mail is installed that is 62.150.152.1 the directory is > '/var/www/html/squirrelmail-1.4.4/data' > > drwxr-xr-x 2 nobody 48 12288 Dec 20 10:28 data > > and permisons for > '/var/data' > drwxr-xr-x 2 nobody nobody 4096 Dec 20 10:14 data > > also i have created the /var/data on 62.150.152.2 server with the above > permisons but i see that the pref n abook files are been created in > /var/data directory on the kmun server that is 62.150.152.1 and nothing on > 62.150.152.2 server . As I mentioned already, prefs are only created on the server where SM is installed unless you have something like an NFS mounted directory. > if there is somethin wrong in my pluggin settings appreciate your help > > also the server where SQ mail was installed has not been touched > > now I hav temprary solved the problem by goin into options => personal > information => and fill the email address to user@xxxxxxxxxxxxxx and reply > to fields as user@xxxxxxxxxxxxxx and then it works fine as the recieved > mail > shows user@xxxxxxxxxxxxxx and not as user@xxxxxxxxxxx so if the reply > button is hit the mail is replied correctly but this has to be done for > each user and previously was not the case > > > thnks and appreciate one again > > > regards > > > simon > > > > > > > > > > > > > > > > > > > > > > > Don't reply off-list, thanks. > > > >> Thnaks a lot for the quick reply really do appreciate > >> > >> > On 12/17/06, simon@xxxxxxxxxxx <simon@xxxxxxxxxxx> wrote: > >> >> > >> >> Dear All, > >> >> > >> >> I have been using the multilogin plugin for quite sometime on Linux > >> >> server > >> >> A ( Domain A ) to log in with squirrel mail to Linux server B ( > >> Domain B > >> >> )and recently i had to format /usr n /var partitions and reinstalled > >> >> linux > >> >> on server B > >> >> > >> >> now when i try to log in by selectin the B server it gives me the > >> >> following error . > >> >> Error opening ../data/default_pref > >> >> Could not create initial preference file! > >> >> /var/data/ should be writable by user nobody > >> >> > >> >> the permission of /var/data directory is nobody nobody with write > >> >> permisons > >> >> now if i create the same directory on server A that is /var/data with > >> >> the > >> >> right right permissions i get no error it works fine but the mail > >> >> received > >> >> is the username@domain A . not as username@domain B as mentioned in > >> >> plugin > >> >> since the data directories are shared > >> > > >> > Your settings below say they are not shared. So which is it? > >> > > >> >> and also the .pref n .abook files r created on server A > >> >> > >> >> > >> >> squireel mail version 1.4.4 > >> >> multilogin plugin version 2.3.2-1.2 Paul Lesneiwski > >> <paul@xxxxxxxxxxxxx> > >> >> my config.php > >> >> > >> >> $IMAPSelections = array( > >> >> > >> >> 'KMUN' => array( > >> >> 'imapServerAddress' => 'xx.xx.xx.1', > >> >> 'imapPort' => '143', > >> >> 'data_dir' => > >> '/var/www/html/squirrelmail-1.4.4/data', > >> >> ), > >> >> > >> >> 'BALADIA' => array( > >> >> 'imapServerAddress' => 'xx.xx.xx.2', > >> >> 'imapPort' => '143', > >> >> 'org_title' => 'MAIL SERVER', > >> >> 'data_dir' => '/var/data', > >> > > >> > What format are your IMAP usernames in? If they are the same as > >> > fully-formatted email addresses, ie., keiko@xxxxxxxxxxx, then I > >> > suggest that you only need one data directory, and remove the data_dir > >> > setting completely. If you really need separate data directories for > >> > each server login, then show the permissions AND ownership of both of > >> > the above directories (note that both of them are being accessed on > >> > the server where SquirrelMail is installed). > >> > >> i do need separate data directories. > >> here below are the permisons for both directories. > >> SQ mail is running on server > >> > >> 'xx.xx.xx.1' > >> > >> the the pluggin is used to log in server > > > > What does this mean? No one uses the plugin to log in to the other > > server? If so, why do you need this plugin? > > > >> 'xx.xx.xx.2' > >> > >> > >> permisons for xx.xx.xx.1 which is the server where SQ mail is running > >> that is '/var/www/html/squirrelmail-1.4.4/data' > >> > >> drwxr-xr-x 2 nobody 48 12288 Dec 18 14:10 data > >> > >> and for xx.xx.xx.2 the server of other domain > >> that is '/var/data' > >> > >> drwxr-xr-x 2 nobody nobody 4096 Dec 17 08:40 data > >> > >> Now when i try to use username and password n try to select the differnt > >> domain or server it gives me the error message > >> > >> Error opening ../data/default_pref > >> >> Could not create initial preference file! > >> >> /var/data/ should be writable by user nobody > >> > >> > >> now if i create /var/data directory on the server where squirrel mail is > >> running ( that is xx.xx.xx.1 ) and give nobody nobody permissions than > >> i > >> can log in perfect > > > > I already said in my last email that the data directories being > > accessed will all be on the server that SM is installed on. SM will > > NOT access ANYTHING on the other server's file system unless you do > > something like use an NFS mount or other solution outside of SM's > > control. So this is working correctly. > > > >> but the sent email has the domain name of the server > >> where squirel mail is running n not of the actual domain > > > > That's got nothing to do with where the data directory is, it is > > caused because you did not put 'domain' settings in your multilogin > > configuration. > > > >> also the .abook n .pref files get created on the server where squirrel > >> mail is running that is xx.xx.xx.1 and not on xx.xx.xx.2 . > > > > See above. > > > > > > > >> appreciate your help > >> > >> thnks and reagrds > >> > >> > >> Simon > >> > >> > >> > >> > > >> > Also compare the directory permissions and ownership against the > >> > following FAQ pages and maybe you can solve your own problem: > >> > > >> > http://www.squirrelmail.org/wiki/DataPermission > >> > http://www.squirrelmail.org/wiki/QuickAndDirty > >> > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV -- squirrelmail-users mailing list Posting Guidelines: http://www.squirrelmail.org/wiki/MailingListPostingGuidelines List Address: squirrelmail-users@xxxxxxxxxxxxxxxxxxxxx List Archives: http://news.gmane.org/thread.php?group=gmane.mail.squirrelmail.user List Archives: http://sourceforge.net/mailarchive/forum.php?forum_id=2995 List Info: https://lists.sourceforge.net/lists/listinfo/squirrelmail-users
